Fixed Rectangular Table (Models C20250412-01 / C20250412-02)
This unit is a fixed rectangular table model supplied with furniture power distribution units. Read the full manual before assembly and operation, and keep it for future reference.
Specyfikacje
| Modele | C20250412-01 / C20250412-02 |
| Tomtage (Model C20250412-01) | 110 V |
| Tomtage (Model C20250412-02) | 220 V |
| Bezpieczna waga załadunku | 150 funtów |
| Wymiary produktu (gł.*szer.*wys.) | Wymiary: 1200*500*860 mm |
| Masa netto | 17 kilogramów |
Furniture Power Distribution Units (as listed):
- EU input: 220-240V~ 50/60Hz 10A; Output DC5V max. 2.1A
- USA input: 125V~ 60Hz 12A 1500W; Output DC5V max. 3A or DC5V max. 2A
Setup & Use (Concise)
- Before assembly, read all manual instructions carefully and keep the manual available.
- Verify all package components/accessories are present and labeled; keep them away from children.
- Assemble only according to the provided assembly instructions; use ANSI-approved safety goggles and heavy-duty work gloves.
- Assemble on a clean, soft underlay (e.g., carpet or cardboard) to avoid scratching the surface.
- During installation, note that the product is not stable until fully installed—do not move it randomly.
- Before use, check that the product is not abnormal; if abnormal, stop using it.
Rozwiązywanie problemów
- Interference with radio/TV reception: If the product causes harmful interference (detectable by turning the product off and on), try reorienting or relocating the receiving antenna, increasing the distance between the product and receiver, connecting the product to a different circuit outlet than the receiver, or consulting a dealer/experienced radio/TV technician.
- Damaged supply cord: Jeśli przewód zasilający jest uszkodzony, musi zostać wymieniony przez producenta, jego przedstawiciela serwisowego lub podobnie wykwalifikowaną osobę, aby uniknąć zagrożenia.
- Adapter/cover issue: The cover must not be opened. If the cover is damaged, the adapter may no longer be used.
Często zadawane pytania
- What should I do before assembling or operating the product?
- Read all manual instructions carefully before operating, and keep the instruction manual in a place where the user can find it at any time.
- How do I reduce the risk of scratching the table surface during assembly?
- Install/assemble the product on a clean and soft underlay (such as carpet or cardboard) to avoid scratching or damaging the surface.
- If the product causes radio or television interference, what can I try?
- Spróbuj zmienić orientację lub położenie anteny odbiorczej, zwiększasing the distance between the product and receiver, connecting the product to a circuit different from the receiver, or consulting an experienced radio/TV technician.
Dokumenty / Zasoby
 | C20250412-02 Fixed Rectangular Table |
Odniesienia
- Instrukcja obsługimanual.tools
Published: September 6, 2026
Zaktualizowano: 7 września 2026 r.