JoJo Booster Pump Flow Controller User Guide

JoJo Booster Pump Flow Controller

Specyfikacje

• Nazwa produktu: JoJo Booster Pump Flow Controller
• Kompatybilny z: JoJo Booster Pumps
• Część zamienna: JoJo PC Board
• Wymagane narzędzia: STAR SCREW DRIVER

Będziesz potrzebować:

Notatka: Our Booster Pump PC Board is only suited for use with the following JoJo

Booster Pumps:

•  Pompa wspomagająca 0.37 kW
•  0.55kW, 0.75kW & 1.1kW
• Pompy odśrodkowe
•  Samozasysająca pompa strumieniowa o mocy 0.6 kW

Instrukcje użytkowania produktu

KROK 1
Ensure that your pump is disconnected from the power source.

KROK 2
Unscrew the four screws holding the terminal box cover in place.

KROK 3
Zdejmij pokrywę skrzynki zaciskowej.

KROK 4
Disconnect the wires from the terminals and remove from the terminal box.

KROK 5
Unscrew the two screws holding the PC Board in place.

KROK 6
Wyjmij płytę PC.

KROK 7
Insert the replacement JoJo PC Board.

KROK 8
Insert and fasten the two securing screws on both sides of the PC Board.

KROK 9
Secure the wires to the terminals as follows:

•  the wires from the pump through the bottom grommet
• the wires from the three-point plug through the top grommet.
  Notatka: ensure that the correct color sequence is followed as shown below

KROK 10
Replace the terminal box cover, and fasten the four screws holding it in place.

KROK 11
Your pump is now ready for use and reconnection to your power supply.
Scan the QR Code to watch the instructional video for visual guidance.

www.jojo.co.za

Często zadawane pytania