Station is a manufacturer of advanced pool automation and chemical control systems designed to maintain optimal water conditions.
Station provides comprehensive pool controller solutions that automate the dosing of pool chemicals to maintain perfect water conditions. Their base products offer control over water temperature, filtration periods, pool lighting, and auxiliary relays.
With modular upgrades such as pH, redoX, and conductivity probes, Station systems offer customizable, smart automation that ensures safe and optimized water quality for commercial and residential pool owners.
Najnowsze instrukcje od manuals+ specjalnie wyselekcjonowane dla tej marki.
Często zadawane pytania dotyczące instrukcji, rejestracji i wsparcia dla tej marki.
It is recommended to calibrate the pH probe every month during the pool season. You can use buffer solutions (pH 7 / pH 10) following the display instructions, or perform a manual calibration to match a known reference value.
Alarm AL3 indicates that the maximum dosing time (usually 200 minutes) has been reached and the acid dosing pump has stopped to prevent the water from becoming overly acidic. Press ESC to clear the message, then check your pH probe reading and verify that the acid deposit is full.
Smart mode adjusts the total daily filtration time based on the water temperature. If the temperature is below your minimum setting, filtration drops to 5 minutes. If it exceeds your maximum setting, it uses the full programmed timer. Between these temperatures, the filtration time scales linearly.
Check if the main ON/OFF switch is illuminated, verify the connection wire between the display and the motherboard, ensure the external 250 mA fuse has not blown, and confirm the 210-230 V power supply is active.