Baseus Bluetooth Earphone Instructions

Logo Baseusa Baseus Bluetooth Earphone

Baseus Bluetooth Earphone Manual
Please read this manual fully before use and keep it for future reference. This guide fits all Baseus in-ear TWS earbuds (Bowie, Encok, Eli Sportseries).

Zawartość opakowania

  • 1 Pair of Baseus TWS Earbuds (Left & Right)
  • 1 Charging Storage Case
  • 1 Type-C Fast Charging Cable
  • 3 S/M/L Replacement Silicone Ear Tips
  • 1 Instrukcja obsługi

Power On & Bluetooth Pairing

Włącz zasilanie
Open charging case lid, earbuds power on automatically, LED lights flash alternately to enter pairing mode.
Pierwsze połączenie

  1. Turn on Bluetooth on your phone/laptop;
  2. Search Bluetooth device: Baseus Bowie XXX;
  3. Tap the device name to pair, voice prompt “Connected” when matched.

Automatyczne ponowne łączenie
Put earbuds into case and close lid to power off; open lid to auto connect last paired device.
Połączenie dwóch urządzeń

  1. Pair earbuds with Device A, put earbuds into case without power off, turn off Bluetooth of A;
  2. Open lid to pair Device B;
  3. Reactivate Bluetooth of A to connect two devices simultaneously, auto switch for incoming calls.

Operacja sterowania dotykowego

Sterowanie muzyką

  • Odtwórz/Pauza: Double tap touch area of any earbud
  • Poprzedni utwór: Long press left earbud for 1.5s
  • Następny utwór: Long press right earbud for 1.5s
  • Ściszanie: Jedno dotknięcie lewej słuchawki
  • Zwiększenie głośności: Jedno dotknięcie prawej słuchawki dousznej
  • Asystent głosowy (Siri/Google): Triple tap any earbud

Kontrola połączeń

  • Answer Call: Double tap earbud
  • Hang Up Call: Double tap during call
  • Reject Call: Long press earbud for 1.5s

ANC / Transparency Mode (Noise Cancelling Models)
Long press earbud for 1 second to cycle: ANC Mode →Transparency Mode→ Standard Mode
Tryb niskiego opóźnienia gry

  1. Double tap charging case button to toggle;
  2. Enable in official Baseus App.

Charging & Indicator Lights

Ładowanie słuchawek dousznych
Place earbuds into charging slots, close lid to auto charge, inner light turns on while charging.
Ładowania etui do ładowania
Plug Type-C cable into 5V power adapter; flashing light = charging, steady light = fully charged.
Light Status Definition

  1. Pairing Mode: One white light fast flash, one white light slow flash
  2. Low Power: Red light intermittent flash with voice reminder
  3. Factory Reset: Both earbuds flash white 3 times then turn off
  4. Full Case Charge: Steady light without flash

Factory Reset (Fix single-side mute, disconnection failure)

Model with Case Button

  1. Put both earbuds fully into case, keep lid open;
  2. Long press case button for 8–10s until both earbuds flash white 3 times;
  3. Release button, close lid for 5s, open lid to re-pair Bluetooth.

Touch-only Model (No Case Button)

  1. Forget earbuds device on your Bluetooth list;
  2. Triple tap earbud touch panel, hear three beep alerts;
  3. Put earbuds back into case, reset complete.

Baseus Official App Functions

  1. Download “Baseus” App in app store, auto bind after Bluetooth connection;
  2. Custom touch gestures, EQ sound, spatial audio, game low latency mode;
  3. Check real-time battery of earbuds & charging case;
  4. Enable ENC call noise reduction, voice boost, find earbuds location;
  5. OTA online firmware upgrade to optimize sound and connection stability.

Specyfikacje ogólne

  • Wersja Bluetooth: Bluetooth 5.3/5.4, 10 meters barrier-free transmission
  • Port ładowania: Type-C Fast Charge
  • Stopień wodoodporności: IPX4 / IPX5 (Sweat & light splash resistant, DO NOT swim or shower with earbuds)
  • Czas odtwarzania jednej słuchawki dousznej: 4–6H; Total Playtime with Case: 20–30H
  • Szybkie ładowanie: 10 mins charging for 2 hours playback
  • Driver Unit: 10mm composite diaphragm, dual-mic ENC call noise cancellation

Częste rozwiązywanie problemów

  1. Tylko jedna słuchawka ma dźwięk: Complete factory reset, clean metal charging contacts, delete Bluetooth record and re-pair;
  2. Frequent Bluetooth disconnection: Stay away from 2.4G WiFi interference, update firmware via App;
  3. Muffled & quiet call voice: Clean microphone hole, enable ENC mode inside App;
  4. Nie można ładować: Wipe dirty metal contacts, replace charging cable or power adapter;
  5. Unresponsive touch panel: Dry water on earbuds surface, reset touch settings in App.

Ostrzeżenia dotyczące bezpieczeństwa

  1. Do not listen music at high volume for long periods to avoid permanent hearing damage;
  2. Only daily sweatproof, not suitable for shower, diving or swimming;
  3. Charge once per month if unused long-term to extend lithium battery service life;
  4. Keep away from high temperature, heavy squeeze and dropping;
  5. Keep away from children to prevent accidental swallowing of small silicone ear tips.

Logo Baseusa

Dokumenty / Zasoby

PDF thumbnailSłuchawki Bluetooth
Instructions · TWS earbuds, Bowie, Encok, Bluetooth Earphone, Earphone

Odniesienia

Zadaj pytanie

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Zadaj pytanie

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.