Wstęp
This manual provides detailed instructions for the installation, operation, and maintenance of your Varstrom 48V 500W/750W Rear Hub Motor Ebike Conversion Kit. This kit is designed to transform a standard bicycle into an electric bike, offering enhanced performance and versatility. Please read this manual thoroughly before installation and use to ensure proper function and safety.
The Varstrom hub motor kit is available in two main versions: the Standard Version (125EVH Series) for daily commuting and leisure, and the Performance Version (125XVH Series) for demanding applications like food delivery or tackling steep hills. Both versions offer reliable and efficient power for various riding needs.
Informacje dotyczące bezpieczeństwa
Always prioritize safety when operating your ebike. Failure to follow safety guidelines can result in serious injury or damage to the product.
- Zawsze należy nosić kask i odpowiedni sprzęt ochronny.
- Przed każdym użyciem należy przeprowadzić kontrolę przed jazdą, sprawdzając hamulce, opony i wszystkie połączenia.
- Zapoznaj się z lokalnymi przepisami dotyczącymi rowerów elektrycznych i przepisami ruchu drogowego.
- Nie należy obsługiwać roweru elektrycznego będąc pod wpływem alkoholu lub narkotyków.
- Ensure all electrical connections are secure and protected from moisture. The motor has an IPX5 waterproof rating, but the controller and display should also be protected.
- Avoid riding in extreme weather conditions or on unsafe terrain.
- Keep hands and feet clear of moving parts, especially the motor and wheel spokes.
Zawartość opakowania
Your Varstrom Rear Hub Motor Kit includes the following components:
- Pre-laced Rear Wheel with Motor
- Inteligentny kontroler
- LCD Display (Optional, specific model depends on selection)
- Brake Levers + Thumb Throttle
- PAS Sensor + All Cables & Headlight
Note: Battery is sold separately. A right-side PAS sensor may be required if using a hollow crankset.
Konfiguracja i instalacja
This section guides you through the installation process of your Varstrom hub motor kit. Ensure your bicycle is compatible with the kit's specifications before beginning.
Sprawdzenie zgodności
- Szerokość tylnego widelca: The kit is designed for bicycles with a rear dropout width of 135-145mm.
- Układy hamulcowe: Supports both disc and V-brake systems.
- Typ kasety: Compatible with cassette flywheels (not for screw-on freewheels) and works with up to 10-speed gear systems.
- Rozmiar koła: Fits 20", 26", 27.5", and 700C (28"/29") wheels.
Identifying Your Wheel Size
To ensure you have the correct motor wheel, verify your bicycle's wheel size. This information is typically found on the sidewall of your tire.
Image: Guide on how to choose the suitable wheel size by checking tire markings. It shows examples of 29x2.125, 27.5x2.10, 26x2.125, and 20x1.85/36 tire sizes with corresponding rim sizes and diameters.
Instalacja ponadview
The following diagram illustrates the general connection points for the Varstrom hub motor kit components. A detailed step-by-step guide is recommended for first-time installers.
Image: Exploded diagram showing the various components of the ebike conversion kit and their connections. Key components include the hub motor, controller box, PAS sensor, battery (optional), brake levers, thumb throttle, 1T4 cable, display (optional), and headlight. It also highlights the 135-145mm rear dropout size compatibility.
- Install Rear Wheel: Replace your bicycle's rear wheel with the pre-laced motor wheel. Ensure the dropout width is 135-145mm. Securely fasten the wheel.
- Kontroler montażu: Find a suitable location on your bike frame for the intelligent controller box, typically near the battery or motor. Secure it firmly.
- Zainstaluj czujnik PAS: Attach the Pedal Assist System (PAS) sensor to your bike's bottom bracket. Ensure correct alignment for accurate pedal detection. Note: A right-side PAS sensor may be needed for hollow cranksets.
- Zamontuj wyświetlacz i elementy sterujące: Install the display, thumb throttle, and brake levers onto your handlebars. Position them for comfortable and safe access.
- Podłącz okablowanie: Carefully connect all cables according to the diagram. Ensure all connections are snug and waterproof. The 1T4 cable simplifies wiring for multiple accessories.
- Montaż reflektora: Mount the headlight to the front of your bike and connect it to the system.
- Podłączenie akumulatora: Connect your 48V/52V battery (sold separately) to the controller. Ensure the battery is fully charged before first use.
Instrukcja obsługi
Once installed, operating your Varstrom ebike conversion kit is straightforward. This section covers basic operation and display functions.
Włączanie/wyłączanie
To power on the system, press and hold the power button on your display unit. To power off, press and hold the power button again until the display turns off.
Display Options and Functions
Your kit may come with one of three advanced display choices: VD03, VD04, or EKD01. Each display offers different features and visual clarity.
Image: Comparison of EKD01, VD03, and VD04 display units. EKD01 is a 2.4" TFT screen with navigation. VD03 is a compact 1.5" LED screen. VD04 is a large 3.5" IPS screen with enhanced visuals and navigation. All support 9 PAS levels, are IP67 waterproof, connect to the BIKEGO+ app for remote locking/unlocking, and feature one-key speed limit adjustment.
- Wyświetlacz VD03: A compact 1.5" LED screen, ideal for limited space or budget. Covers essential functions.
- Wyświetlacz VD04: A large 3.5" IPS screen, offering enhanced visuals and data clarity.
- Wyświetlacz EKD01: A wide 2.4" TFT horizontal display, also offering enhanced visuals and data.
- Wspólne cechy: All three displays support 9 PAS levels, are IP67 waterproof, connect to the BIKEGO+ app for remote locking and unlocking, and include one-key speed limit adjustment.
System wspomagania pedałowania (PAS)
The PAS sensor detects your pedaling motion and provides motor assistance based on the selected assist level. Use the '+' and '-' buttons on your display to adjust the assist level (typically 1-9).
Przepustnica kciukowa
The thumb throttle provides on-demand power, allowing you to accelerate without pedaling. Use it cautiously, especially in crowded areas or when starting from a stop.
Dźwignie hamulca
The included brake levers are designed to cut off motor power when engaged, ensuring safe stopping. Always test your brakes before riding.
Konserwacja
Regular maintenance ensures the longevity and optimal performance of your Varstrom ebike conversion kit.
- Czyszczenie: Regularnie czyść swój rower elektryczny za pomocąamp cloth. Avoid high-pressure washing directly on electrical components. The motor has an IPX5 waterproof rating, suitable for splashes, but not submersion.
- Znajomości: Okresowo sprawdzaj wszystkie połączenia elektryczne pod kątem szczelności i korozji. Upewnij się, że kable nie są ściśnięte ani uszkodzone.
- Opony: Maintain correct tire pressure as indicated on your tire sidewall. Inspect tires for wear and damage.
- Hamulce: Check brake pads for wear and ensure brake levers are functioning correctly. Adjust as needed.
- Silnik: The geared brushless motor is designed for durability. The 125XVH performance version features durable nylon helical gears for extended lifespan and quiet operation (<60dB). No specific user maintenance is required for the internal motor components.
- Pielęgnacja baterii: Follow the manufacturer's instructions for your specific battery (sold separately). Generally, store batteries in a cool, dry place and avoid fully discharging them.
Rozwiązywanie problemów
This section provides solutions to common issues you might encounter with your ebike kit.
- Brak zasilania wyświetlacza:
- Sprawdź podłączenie akumulatora i upewnij się, że jest naładowany.
- Verify all cable connections, especially the main power cable to the controller.
- Silnik nie wspomaga:
- Ensure the PAS sensor is correctly installed and aligned.
- Check if the assist level on the display is set above zero.
- Verify brake levers are not engaged, as they cut motor power.
- Przepustnica nie działa:
- Check the throttle cable connection to the controller.
- Ensure the system is powered on and not in a restricted mode (e.g., street-legal mode).
- Kody błędów na wyświetlaczu:
- Refer to your specific display's manual for a list of error codes and their meanings.
- Common errors relate to motor, controller, or sensor malfunctions. Recheck connections.
If you encounter persistent issues, please contact Varstrom customer support for assistance.
Specyfikacje
Detailed specifications for the Varstrom Rear Hub Motor Kit.
Specyfikacja silnika
Image: Comprehensive table outlining the specifications for 125EVH 48V500W Front/Rear Hub Motor (Standard Version) and 125XVH 48V500W/48V750W Rear Hub Motor (Performance Version). Details include Motor Type (Gear Drive Brushless), Rated Power, Peak Power, Rated Voltage, Max Speed, Max Torque, Efficiency, Compatible Size, Brake Type, Spoke Type, Cassette Type, Noise Grade, Waterproof rating (IPX5), and Wheel Size.
| Funkcja | 125EVH 48V500W (Standard) | 125XVH 48V500W (Performance) | 125XVH 48V750W (Performance) |
|---|---|---|---|
| Typ silnika | Silnik bezszczotkowy z napędem przekładniowym | ||
| Moc znamionowa | 500 W | 500 W | 750 W |
| Moc szczytowa | 800 W | 864 W | 1056 W |
| Znamionowa objętośćtage | 48 V | ||
| Maksymalna prędkość | 40-45 km/godz. | 45-50 km/godz. | 55-60 km/godz. |
| Maksymalny moment obrotowy | 65N·m | 65N·m | 80N·m |
| Efektywność | ≥78% | ≥80% | |
| Kompatybilny rozmiar | 135-145mm Rear Dropout | ||
| Typ hamulca | Hamulec tarczowy / hamulec V | ||
| Typ kasety | ≤10-Speed Cassette | ||
| Stopień hałasu | <60dB | ||
| Wodoodporny | IPX5 | ||
| Rozmiar koła | 20"/26"/27.5"/700C | ||
Specyfikacje kontrolera
| Kontroler | DC Rated Voltage | Moc znamionowa | Ogranicz prąd | Prąd znamionowy | Under Voltage Ochrona | Over-voltage Ochrona |
|---|---|---|---|---|---|---|
| 48V500W | 48 V | 500 W | 18±1A | 9±1A | 39±1 V | 62.4 V |
| 48V750W | 48 V | 750 W | 22±1A | 11±1A | 39±1 V | 62.4 V |
Specyfikacje ogólne
- Marka: Varstrom
- Nazwa modelu: US JJ 125EVH/125XVH DZ-Rear
- Materiał ramy: Aluminium
- Materiał koła: Aluminium
- Liczba prędkości: 10 (compatible with up to 10-speed gear systems)
- Cechy szczególne: Digital Display, Durable, Headlight, IPX5 Waterproof, Taillight (optional)
- Wymagany montaż: Tak
- Poziom umiejętności: Beginner (for assembly)
Kompatybilność baterii
The kit is compatible with standard 48V/52V battery systems. Various battery options are available separately to suit your range and power needs.
Image: Table displaying parameters for various 48V and 52V battery options, including Shark Battery (13Ah, 16Ah, 19.2Ah, 20Ah), YingWu Battery (52V 20Ah), Voltz X Battery (48V 20Ah), and Rear Rack Battery (48V 17.5Ah). Parameters include Type, Watt Hour, Battery Cell, BMS, Charge Voltage, Size (L*W*H), Weight, USB Port, Cycle Life, and Protection Function.
Gwarancja i wsparcie
Informacje o gwarancji
Varstrom offers a limited warranty for this product. The warranty includes a 30-day return policy and 365 days for repair or replacement of defective parts. Please retain your proof of purchase for warranty claims.
Obsługa klienta
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Varstrom customer support through the retailer where you purchased the product or visit the official Varstrom webwitryna do informacji kontaktowych.
