TOMZN Three Phase 3P+N WiFi Smart Circuit Breaker

1. Wprowadzenie

This manual provides detailed instructions for the installation, operation, and maintenance of your TOMZN TOB1S-63 Three Phase 3P+N WiFi Smart Circuit Breaker. This device is designed to provide advanced electrical protection and smart control capabilities for various applications, including solar installations. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Informacje dotyczące bezpieczeństwa

OSTRZEŻENIE: Electrical shock hazard. Installation and servicing must be performed by qualified personnel only. Always disconnect power before working on the circuit breaker or associated wiring.

• Ensure the main power supply is OFF before installation or maintenance.
• Verify correct wiring connections to prevent damage to the device and connected equipment.
• Nie używaj wyłącznika, jeśli wydaje się, że jest uszkodzony.
• This device is designed for indoor use or in appropriate enclosures that protect it from direct weather exposure.

3. Koniec produktuview

The TOMZN TOB1S-63 is a smart circuit breaker offering protection against over-voltage (OVP), część objtage (UVP), over-current (OCP), and short-circuit conditions. It features WiFi connectivity for remote control via the TUYA Smartlife app and supports RS485 Modbus communication.

Rycina 3.1: Przód view of the TOB1S-63 Smart Circuit Breaker, showing the main switches, power and load terminals, WiFi antenna, and indicator lights.

Rysunek 3.2: Kątowy view highlighting the input (Power) and output (Load) terminals, along with the WiFi antenna connection point.

Kluczowe komponenty:

• Główne wyłączniki: Manual ON/OFF control for each phase.
• Zaciski zasilania: Input connections for the three-phase and neutral lines.
• Terminale obciążeniowe: Output connections to the protected circuit.
• Antena WiFi: For wireless communication with the Smartlife app.
• Signal/Light Indicators: Provide status feedback (e.g., power, WiFi connection).
• Zaciski montażowe na szynie DIN: For secure installation on a standard DIN rail.

Rysunek 3.3: Strona view illustrating the DIN rail mounting clips for easy installation.

4. Konfiguracja

4.1 Instalacja mechaniczna

1. Ensure all power is disconnected at the main breaker.
2. Mount the TOB1S-63 circuit breaker onto a standard 35mm DIN rail by engaging the clips on the back of the device.

4.2 Okablowanie elektryczne

The TOB1S-63 is a 3P+N device. Connect the incoming power supply to the 'Power' terminals and the load to the 'Load' terminals as indicated on the device.

• Connect the three phase lines (L1, L2, L3) and the neutral line (N) to the respective 'Power' input terminals.
• Connect the corresponding load lines (L1, L2, L3, N) to the 'Load' output terminals.
• Ensure all screw-type terminals are tightened securely to prevent loose connections and arcing.

Rysunek 4.1: Góra view with a simplified wiring diagram indicating Power (input) and Load (output) connections.

4.3 WiFi Network Connection (TUYA Smartlife App)

1. Download the 'TUYA Smartlife' app from your smartphone's app store.
2. Zarejestruj się lub zaloguj na swoje konto Smartlife.
3. Ensure the circuit breaker is powered ON. The 'Signal' indicator light should be blinking. If not, press and hold the 'Press 10s network' button until it blinks rapidly.
4. In the Smartlife app, tap '+' to add a device. Select 'Electrical' > 'Circuit Breaker (Wi-Fi)'.
5. Follow the on-screen instructions to connect the device to your 2.4GHz WiFi network.
6. Once connected, the 'Signal' indicator will become solid.

4.4 RS485 Modbus Connection (Optional)

For RS485 Modbus communication, connect the A and B terminals of the circuit breaker to your Modbus network. Refer to the Modbus protocol documentation for specific register addresses and communication parameters.

5. Instrukcja obsługi

5.1 Obsługa ręczna

To manually turn the circuit breaker ON or OFF, use the red toggle switches on the front panel. Push up for ON, push down for OFF.

5.2 Smartlife App Operation

Once connected to the Smartlife app, you can:

• Remotely turn the circuit breaker ON/OFF.
• Set schedules or timers for automatic operation.
• Monitor real-time current, voltage i pobór mocy.
• Adjust protection parameters (OVP, UVP, OCP).

5.3 Funkcje zabezpieczające

The TOB1S-63 provides the following adjustable protection features:

• Ponad tomtage Ochrona (OVP): Adjustable range 250-300V. The breaker will trip if the voltage exceeds this set limit.
• Pod Voltage Ochrona (UVP): Adjustable range 150-200V. The breaker will trip if the voltage drops below this set limit.
• Zabezpieczenie nadprądowe (OCP): Adjustable range 1-63A. The breaker will trip if the current exceeds this set limit.
• Zabezpieczenie przed zwarciem: Non-adjustable, inherent protection against short circuits.

Adjust these settings via the Smartlife app interface for the device. After a trip event, investigate the cause before manually resetting the breaker.

6. Konserwacja

The TOMZN TOB1S-63 circuit breaker requires minimal maintenance.

• Okresowo należy sprawdzać połączenia przewodów, aby mieć pewność, że są dobrze dokręcone i nie mają śladów korozji.
• Utrzymuj urządzenie w czystości, bez kurzu i zanieczyszczeń. Do czyszczenia używaj suchej, miękkiej ściereczki.
• Nie należy używać płynnych środków czyszczących ani rozpuszczalników.
• Zapewnij odpowiednią wentylację wokół urządzenia, aby zapobiec przegrzaniu.

7. Rozwiązywanie Problemów

• Urządzenie się nie włącza:
  • Sprawdź główne zasilanie.
  • Verify all input wiring connections are secure.
• Circuit breaker trips frequently:
  • Check for over-current conditions on the load.
  • Zweryfikuj objętośćtage levels are within the set OVP/UVP ranges.
  • Inspect for short circuits in the connected load.
  • Adjust OVP/UVP/OCP settings if necessary, ensuring they are appropriate for your application.
• Problemy z połączeniem WiFi:
  • Ensure your router is 2.4GHz compatible.
  • Check WiFi signal strength at the device location.
  • Restart the circuit breaker and your WiFi router.
  • Re-attempt the pairing process in the Smartlife app.
• RS485 Modbus communication failure:
  • Verify A and B terminal connections.
  • Check Modbus network configuration and device address.

8. Specyfikacje

9. Gwarancja i wsparcie

Aby uzyskać informacje o gwarancji i pomocy technicznej, zapoznaj się z dokumentacją dołączoną do zakupu lub skontaktuj się ze sprzedawcą. Zachowaj paragon jako dowód zakupu.