INTEX 26769EH Oprawka pryzmatyczna przezroczystaview Prostokątny zestaw basenowy naziemny

1. Koniec produktuview

This manual provides essential information for the safe assembly, operation, and maintenance of your Intex 26769EH Prism Frame Clearview Rectangular Above Ground Swimming Pool Set. Please read all instructions carefully before setup and retain this manual for future reference.

The Intex Prism Frame Clearview pool offers a unique swimming experience with its integrated vertical windows, allowing for underwater visibility. It features a robust frame structure and a durable liner designed for extended use.

Główne cechy:

• Jasneview Okna: Elegant vertical windows provide captivating underwater views.
• Trwała konstrukcja: Features powder-coated metal frames and a 3-ply material liner for stability and strength.
• Łatwy montaż: Designed for quick setup, ready for water in approximately 45 minutes after ground preparation.
• Puncture-Resistant Liner: Made with 3-Ply PVC material to resist wear and tear. A patch is included for minor repairs.
• Rama odporna na rdzę: Composite T-Joints create a water-tight seal, preventing internal rust and ensuring long service life.
• Krystaliczna filtracja: Includes a 1500 GPH cartridge filter pump with HydroAeration Technology for improved circulation, filtration, and water clarity.

Image 1.1: The Intex Prism Frame Clearview Rectangular Pool set up in a backyard, showcasing its design and clear windows.

2. Ważne instrukcje bezpieczeństwa

Failure to follow these instructions can result in serious injury or death. Always ensure proper supervision and adherence to all safety guidelines.

• Nadzór osoby dorosłej: Constant and competent adult supervision is required at all times. Never leave children unattended in or near the pool.
• Zakaz nurkowania i skakania: This is an above-ground pool. Do not dive or jump into the pool, as this can lead to serious injury, paralysis, or death.
• Bariera basenowa: Install fencing or approved barriers around the pool to prevent unsupervised access by children. Check local regulations for barrier requirements.
• Bezpieczeństwo elektryczne: Keep all electrical cords, including the pump's, away from the pool area. Ensure the pump is connected to a Ground Fault Circuit Interrupter (GFCI) outlet.
• Postępowanie z chemikaliami: Store pool chemicals safely, out of reach of children and pets. Follow manufacturer instructions for chemical dosage and application.
• Gotowość na wypadek sytuacji awaryjnej: Keep emergency equipment, such as a life ring or rescue pole, readily accessible. Have a phone nearby to call for help in an emergency.
• Clear Pool Area: Ensure the area around the pool is clear of obstacles and tripping hazards.
• Nośność: Do not exceed the recommended number of occupants or weight capacity for the pool.

3. Zawartość opakowania

Verify that all components listed below are present and undamaged before beginning assembly. If any parts are missing or damaged, contact Intex customer service.

• Pool Liner with Clearview Okna
• Powder-Coated Steel Frame Components (Horizontal Beams, Vertical Legs, T-Joints)
• Pompa filtrująca z wkładem Krystal Clear (1500 GPH)
• Tkanina gruntowa
• Pokrycie basenu
• Drabina bezpieczeństwa
• Instrukcja obsługi
• Zestaw łatek naprawczych

Obraz 3.1: Koniecview of the main components included in your pool set.

4. Instalacja i montaż

Proper site preparation and careful assembly are crucial for the stability and longevity of your pool.

4.1 Przygotowanie miejsca

1. Choose a Level Location: Select a firm, level area in your yard. The ground must be completely flat to prevent uneven water distribution and stress on the pool structure.
2. Oczyść obszar: Remove all sharp objects, debris, rocks, and roots from the chosen site.
3. Install Ground Cloth: Spread the included ground cloth over the prepared area. This protects the bottom of the pool liner from punctures.

4.2 Montaż ramy

1. Rozłóż wkładkę: Carefully unfold the pool liner onto the ground cloth, ensuring the clear windows are positioned as desired.
2. Montaż belek poziomych: Connect the horizontal beams using the composite T-Joints. Ensure all connections are secure.
3. Attach Vertical Legs: Insert the vertical support legs into the T-Joints and the corresponding slots on the pool liner.
4. Bezpieczna rama: Ensure all frame components are fully engaged and locked into place. The powder-coated steel tubing provides enhanced support.
5. Gładka linijka: Once the frame is assembled, gently pull the liner outwards to remove any wrinkles from the bottom.

Image 4.1: A family engaged in the assembly process of the pool frame.

5. Eksploatacja basenu

5.1 Napełnianie basenu

1. Napełnienie początkowe: Begin filling the pool with water. As the water level rises, continue to smooth out any remaining wrinkles in the liner bottom.
2. Sprawdź, czy nie ma wycieków: Monitor for any leaks during the initial filling process. If leaks are detected, stop filling and address the issue.
3. Fill to Recommended Level: Fill the pool to the water line indicated on the liner or to approximately 6 inches (15 cm) below the top edge of the pool.

5.2 Działanie pompy filtrującej

The included Krystal Clear Cartridge Filter Pump is essential for maintaining water clarity and hygiene.

1. Podłącz pompę: Follow the separate pump instruction manual for connecting the hoses and electrical supply. Ensure all connections are tight.
2. Pompa zalewająca: Before starting, ensure the pump is primed according to its specific instructions to remove air from the system.
3. Codzienna operacja: Run the filter pump for a minimum of 4-6 hours daily to ensure adequate water circulation and filtration. The exact duration may vary based on usage and environmental conditions.
4. Technologia hydroaeracji: The pump incorporates HydroAeration Technology, which enhances water quality by improving circulation and increasing jonów ujemnych.

Image 5.1: The filter pump connected and operating, ensuring clean pool water.

6. Pool Maintenance

Regular maintenance is vital for safe and enjoyable pool use.

6.1 Jakość wody

• Regularnie badaj wodę: Use a pool test kit to check pH, chlorine, and alkalinity levels at least 2-3 times per week.
• Adjust Chemicals: Add appropriate pool chemicals as needed to maintain balanced water chemistry. Follow chemical manufacturer guidelines.
• Leczenie szokowe: Periodically shock the pool water to eliminate bacteria and algae, especially after heavy use or rain.

6.2 Cleaning the Pool

• Skim Surface: Use a skimmer net daily to remove leaves, insects, and other debris from the water surface.
• Basen próżniowy: Vacuum the pool bottom regularly to remove settled debris.
• Clean Filter Cartridge: Rinse the filter cartridge with a garden hose every few days. Replace the cartridge every 2-4 weeks, depending on usage.
• Wipe Liner: Periodically wipe down the pool liner, including the clear windows, to prevent algae buildup.

6.3 Zimowanie (przechowywanie poza sezonem)

1. Drain Pool: Completely drain the pool water using the drain plug.
2. Czyste i suche: Thoroughly clean the pool liner and frame components. Ensure all parts are completely dry to prevent mold and mildew.
3. Demontować: Carefully disassemble the frame and liner.
4. Przechowuj prawidłowo: Store the liner and frame components in a dry, protected area, away from extreme temperatures and pests.

7. Rozwiązywanie typowych problemów

8. Specyfikacje produktu

9. Gwarancja i obsługa klienta

Intex products are manufactured with high-quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. Intex warrants this product against defects in materials and workmanship for a period of one (1) year from the date of retail purchase.

This warranty does not cover defects resulting from negligence, misuse, accident, improper operation, improper maintenance, or storage. It also does not cover damage due to acts of nature, such as storms, floods, or freezing temperatures.

For warranty claims, technical assistance, or to order replacement parts, please contact Intex Customer Service directly. Have your product model number (26769EH) and proof of purchase readily available.

Visit the official Intex website or refer to the contact information provided in your product packaging for the most current customer support details.