WUBEN L3 & PL01 Flashlight User Manual

Welcome to your WUBEN L3 and PL01 Flashlight user manual. This guide provides essential information for the safe and effective operation, maintenance, and troubleshooting of your high-performance tactical and EDC flashlights.

Zawartość opakowania

• WUBEN L3 Flashlight
• WUBEN PL01 Pen Light
• 21700 Li-ion Rechargeable Battery (for L3)
• Kabel ładujący USB-C
• Falrep
• Spare Waterproof O-rings (2)
• Instrukcja obsługi
• Karta gwarancyjna

The WUBEN L3 and PL01 flashlights are included in the bundle, along with essential accessories for operation and maintenance.

Initial Setup: WUBEN L3 Flashlight

Instalacja baterii

Before first use, remove the battery insulation sheet from the L3 flashlight.

Unscrew the tail cap and remove the blue insulation sheet covering the battery. Re-screw the tail cap firmly to ensure a waterproof seal.

Charging the L3 Flashlight

The WUBEN L3 features a dual-way USB-C charging port. Twist the front ring to expose the USB-C port.

Twist the head of the flashlight to reveal the USB-C charging port. Connect the provided USB-C cable to charge the internal 4800mAh battery.

• Wskaźnik ładowania: A red light indicates charging, and a blue light indicates a full charge.
• Charging Times (approximate):
  • 5V/2A: ~160 minutes
  • 9V/2A: ~100 minutes
  • 12V/1.5A: ~110 minutes

The flashlight's indicator light shows red during charging and turns blue when fully charged. The 4800mAh battery supports fast charging.

Operating the WUBEN L3 Flashlight

Włączanie/wyłączanie zasilania i wybór trybu

The L3 flashlight features a single tail switch for all operations.

The tail switch controls power and mode selection. A full press turns the light on or off. Half-presses cycle through brightness modes.

• Chwilowe włączone: Half-press and hold the tail switch for 0.5 seconds for momentary illumination. Release to turn off.
• Stałe włączanie/wyłączanie: Full press the tail switch to turn the flashlight on or off.
• Tryby jasności: With the light on, half-press the tail switch to cycle through Moon (5 lumens), Low (150 lumens), Medium (500 lumens), and High (1500 lumens). The flashlight remembers the last used brightness mode.
• Tryb Turbo (3000 lumenów): From any mode, half-press and hold the tail switch for 0.5 seconds to activate Turbo mode. Release to return to the previous mode. Turbo mode will automatically step down to 1100 lumens after 4 minutes to prevent overheating.
• Tryb stroboskopowy: Double-click the tail switch quickly to activate Strobe mode. Half-press to return to the previous mode.
• Tryb SOS: Triple-click the tail switch quickly to activate SOS mode. Half-press to return to the previous mode.

The WUBEN L3 provides an ultra-bright output of 3000 lumens, reaching up to 226 meters, suitable for various lighting needs.

Operating the WUBEN PL01 Pen Light

Włączanie/wyłączanie zasilania i wybór trybu

The PL01 pen light also features a single tail switch.

The PL01 pen light is compact and easy to control with its tail switch.

• Włączanie/wyłączanie: Full press the tail switch to turn the light on or off.
• Tryby jasności: With the light on, half-press the tail switch to cycle through High (650 lumens), Medium (150 lumens), Low (50 lumens), and Moon (1 lumen).
• Podwójne zasilanie: The PL01 can use its built-in USB-C rechargeable battery (fully charges in just 1.5 hours) or use 2x AAA batteries (not included) for backup power.

The PL01 offers flexible power options, running on its internal rechargeable battery or two AAA batteries for extended use.

Power Bank Functionality (L3 Flashlight)

The WUBEN L3 can also function as a power bank to charge other devices.

Connect your device to the L3's USB-C port to use it as a power bank. It provides up to 18W output for emergency charging.

• Wyjście: Up to 18W (5V/2A, 9V/2A, 12V/1.5A).
• Discharging Indicators:
  • Blue light on: Normal discharging.
  • Red light flashes: Low battery.

Konserwacja

• Czyszczenie: Clean the flashlight body with a soft cloth. Do not use harsh chemicals.
• O-ringi: Periodically inspect and lubricate the O-rings to maintain water resistance. Replace worn O-rings with the provided spares.
• Pielęgnacja baterii: Store the flashlight with a partially charged battery if not used for extended periods. Avoid over-discharging or over-charging.
• Składowanie: Przechowywać w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.

Rozwiązywanie problemów

Specyfikacje

Gwarancja i wsparcie

WUBEN products come with a manufacturer's warranty. Please refer to the included warranty card for specific terms and conditions. For further support, product registration, or to view additional products, visit the official WUBEN webodwiedź witrynę lub skontaktuj się z obsługą klienta.

Official WUBEN Store: WUBEN Amazon Store