Wstęp
The Nitecore EDC37 is a high-performance tactical flashlight designed for everyday carry, offering exceptional brightness, advanced features, and robust construction. This manual provides detailed instructions for its proper use, maintenance, and troubleshooting. Please read this manual thoroughly before operating your EDC37 flashlight.
Image: The Nitecore EDC37 flashlight, showcasing its compact design, packaging, and included USB-C charging cable and lanyard.
Organizować coś
Rozpakowywanie i wstępna inspekcja
Carefully unpack your Nitecore EDC37 flashlight and verify all components are present. The standard package includes:
- The Nitecore EDC37 Flashlight
- Kabel ładujący USB-C
- Falrep
- Instrukcja obsługi (ten dokument)
Ładowanie akumulatora
The EDC37 features a built-in 8,000mAh Li-ion battery. For optimal performance, fully charge the flashlight before first use.
- Znajdź port ładowania USB-C w latarce.
- Podłącz dołączony kabel ładujący USB-C do portu latarki.
- Connect the other end of the cable to a USB power source (e.g., USB adapter, computer USB port).
- The OLED display will show the charging progress and current battery level. Charging is complete when the display indicates 100%.
Image: Illustration highlighting the built-in 8000mAh high-capacity Li-ion battery and its impressive runtime capabilities.
Instrukcja obsługi
Podstawowa obsługa
The EDC37 is equipped with dual-stage buttons for intuitive control. The OLED display provides real-time information on brightness level, lumens, battery level, and estimated runtime.
Image: A hand holding the Nitecore EDC37, demonstrating its ergonomic design and compact size for easy handling.
- Włączanie/wyłączanie: Press and hold the main power button (located on the tail) to turn the flashlight on or off.
- Regulacja jasności: With the light on, short press the mode button (located on the tail, above the power button) to cycle through the 4 brightness levels: Ultralow, Low, Mid, High.
- Instant Access Modes:
- LUMIN SHIELD (8,000 Lumens): Press and hold the secondary button (tail switch) for instant burst. Release to turn off.
- SEARCH (3,000 Lumens): Double-press the secondary button (tail switch) to activate the search mode. Press again to turn off.
- Stroboskop: Triple-press the secondary button (tail switch) to activate the strobe mode. Press again to turn off.
- Rapid Lock Lockout Switch: Slide the dedicated lockout switch (located on the side) to the locked position to prevent accidental activation during transport or storage. Slide it back to unlock.
Zaawansowane funkcje
- Level Preset Function: The flashlight allows for presetting a desired brightness level in advance for quick access. Refer to the full digital manual for detailed instructions on setting custom levels.
- Glass Breaking Tips: The EDC37 is designed with detachable high-hardness silicon nitride ceramic tips, capable of breaking glass quickly in emergency situations. These tips are smooth and scratch-resistant for daily carry and can be removed or replaced as needed.
- Advanced Temperature Regulation (ATR): The built-in ATR module automatically adjusts the output of the flashlight based on its internal temperature, ensuring stable performance and preventing overheating during prolonged high-output use.
Image: A detailed diagram illustrating key features of the Nitecore EDC37, including its dual UHi 20 MAX LEDs, 8000mAh battery, dual-stage customizable button, multifunctional OLED display, and Rapid Lock switch.
Konserwacja
Czyszczenie
- Wyczyść korpus latarki miękką,amp ściereczką. Nie używaj środków czyszczących o właściwościach ściernych ani rozpuszczalników, ponieważ mogą one uszkodzić wykończenie.
- Keep the USB-C charging port free from dust, dirt, and moisture to ensure proper charging.
- Periodically wipe the lens with a clean, lint-free cloth to maintain optimal light transmission.
Składowanie
- Przechowuj latarkę w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.
- For long-term storage, it is recommended to charge the built-in battery to approximately 50% every three months to maintain battery health and prolong its lifespan.
- Engage the Rapid Lock lockout switch during storage to prevent accidental activation.
Rozwiązywanie problemów
If you encounter issues with your Nitecore EDC37, please refer to the following common troubleshooting steps:
- Światło się nie włącza:
- Ensure the battery is sufficiently charged. Connect the flashlight to a power source to charge.
- Check if the Rapid Lock lockout switch is engaged. Slide it to the unlocked position.
- Verify that the main power button is being pressed and held correctly.
- Dim output or short runtime:
- This typically indicates a low battery. Recharge the flashlight fully.
- Ensure the flashlight is not operating in a very cold environment, which can temporarily reduce battery performance.
- Confirm that the desired brightness level is selected. Higher lumen outputs consume battery faster.
- Flashlight becomes warm during use:
- It is normal for the flashlight to become warm, especially during prolonged use at high output levels (e.g., 8,000 lumens LUMIN SHIELD or 3,000 lumens SEARCH mode).
- The Advanced Temperature Regulation (ATR) module is designed to manage heat and prevent damage by automatically adjusting the output. This is a safety feature and not a malfunction.
Specyfikacje
The Nitecore EDC37 boasts impressive specifications for its compact size:
| Funkcja | Szczegół |
|---|---|
| Maksymalna wydajność | 8,000 lumenów |
| Maksymalna odległość wiązki | 420 metrów |
| Max Beam Intensity | 44,010cd |
| Maksymalny czas pracy | 190 hours (Ultralow mode) |
| PROWADZONY | 2 x NiteLab UHi 20 MAX LEDs |
| Bateria | Wbudowana bateria litowo-jonowa 8,000mAh |
| Tryby specjalne | STROBE, LUMIN SHIELD, SEARCH |
| Wymiary (dł. x szer. x wys.) | 108.0 mm x 39.3 mm x 31.0 mm (4.25 cala x 1.55 cala x 1.22 cala) |
| Waga | 199 g (7.02 uncji) |
| Tworzywo | High strength stainless steel body with PVD coating, Carbon Fiber Composite Frame |
| Wodoodporny i pyłoszczelny | IP54 |
| Odporność na uderzenia | 2 metrów |
Image: A technical data table detailing the various output modes, beam distances, and runtimes for the Nitecore EDC37.
Obraz: Wybuch view diagram illustrating the durable and pressure-resistant construction of the Nitecore EDC37, highlighting its stainless steel shells, carbon fiber composite frame, and aluminum alloy heat sink.
Gwarancja i wsparcie
Nitecore products are known for their quality and reliability. For detailed warranty information, product registration, and technical support, please visit the official Nitecore webodwiedź witrynę lub skontaktuj się z autoryzowanymi dystrybutorami.
Możesz również odwiedzić Sklep Nitecore na Amazon Aby uzyskać więcej informacji o produkcie i opcjach obsługi klienta.
