Wstęp
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your BWT Advanced PRO 600 Robotic Pool Cleaner. Please read this manual thoroughly before using the device and retain it for future reference.
Informacje dotyczące bezpieczeństwa
Aby zapobiec obrażeniom ciała lub uszkodzeniu urządzenia, należy zawsze przestrzegać następujących środków ostrożności:
- Przed przystąpieniem do czynności konserwacyjnych lub czyszczenia należy upewnić się, że zasilanie jest odłączone.
- Do not operate the robot if the power cable is damaged. Contact customer support for replacement.
- Podczas pracy robota należy trzymać dzieci i zwierzęta domowe z dala od basenu.
- The robot is designed for pool cleaning only. Do not use it for other purposes.
- Only use the original power supply unit provided with the robot.
- Nie wchodź do basenu, gdy robot pracuje.
- The transformer is rated IP54; the robot itself is IP68 waterproof. Ensure the transformer is placed in a dry, protected area.
Zawartość opakowania
Sprawdź, czy w opakowaniu znajdują się wszystkie elementy:
- Robot basenowy BWT Advanced PRO 600
- Jednostka zasilająca (transformator)
- 60 ft (18 m) Floating Cable
- Fine and Ultra-fine Mesh Filter Baskets (pre-installed or separate)
- Transport Caddy
- Instrukcja obsługi (ten dokument)
Image: The BWT Advanced PRO 600 Robotic Pool Cleaner, showcasindzięki kompaktowej konstrukcji i zintegrowanemu uchwytowi.
Organizować coś
Rozpakowanie i początkowe rozmieszczenie
Carefully remove the robot and all accessories from the packaging. Place the transport caddy on a flat, stable surface near the pool.
Obraz: Bok view of the BWT Advanced PRO 600, highlighting its ergonomic handle for easy lifting.
Podłączenie zasilania
Connect the floating cable from the robot to the power supply unit. Ensure the connection is secure. Plug the power supply unit into a grounded electrical outlet. Position the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool and in a shaded area to prevent overheating.
Submerging the Robot
Gently lower the robot into the pool. Allow it to sink to the bottom, releasing any trapped air. Ensure the floating cable is untangled and has enough slack to allow the robot to move freely across the entire pool surface.
Image: The BWT Advanced PRO 600 being carefully lowered into a pool, showing water displacement.
Instrukcja obsługi
Rozpoczęcie cyklu czyszczenia
Once the robot is submerged and the power supply is connected, press the power button on the power supply unit or the robot itself (if applicable) to initiate a cleaning cycle. The robot will begin its programmed cleaning path.
Tryby czyszczenia
The Advanced PRO 600 offers cleaning cycles of 1.5, 2, or 2.5 hours. Select the desired cycle duration based on your pool's size and cleaning needs. The robot will clean the pool floor, walls, and waterline.
Image: The BWT Advanced PRO 600 actively cleaning the wall of a swimming pool, demonstrating its wall-climbing capability.
Automatyczne wyłączanie
The robot is equipped with an automatic shut-off feature. It will power down automatically once the selected cleaning cycle is complete.
Retrieving the Robot
After the cleaning cycle, disconnect the power supply unit from the electrical outlet. Gently pull the floating cable to bring the robot to the edge of the pool. Use the ergonomic handle to lift the robot out of the water. The quick water release system will help drain water efficiently, reducing the robot's weight.
Konserwacja
Regular maintenance ensures optimal performance and extends the lifespan of your BWT Advanced PRO 600.
Czyszczenie filtra
The robot features a 2-level filter system with fine and ultra-fine mesh baskets. After each cleaning cycle, or as needed, clean the filter baskets:
- Disconnect the robot from the power supply.
- Open the top access cover of the robot.
- Remove the filter baskets.
- Rinse the filter baskets thoroughly with a garden hose until all debris is removed.
- Reinsert the clean filter baskets and close the top access cover securely.
Obraz: widok z góry view of the BWT Advanced PRO 600, illustrating the easy-access filter compartment for cleaning.
Czyszczenie szczotek
Inspect the 4 independent active scrubbing brushes (2 front, 2 back) and tracks for any trapped debris, hair, or algae. Clean them as necessary using a brush or hose.
Obraz: Spód view of the BWT Advanced PRO 600, displaying its active scrubbing brushes and robust track system.
Składowanie
When not in use for extended periods, clean the robot thoroughly, ensure it is dry, and store it on its transport caddy in a cool, dry, and shaded area, away from direct sunlight and extreme temperatures.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Robot nie uruchamia się. | No power supply; cable not connected; power button not pressed. | Check power connections; ensure outlet is functional; press power button. |
| Słaba skuteczność czyszczenia. | Clogged filter baskets; worn brushes; insufficient cleaning cycle duration. | Clean filter baskets; inspect and replace brushes if necessary; select a longer cleaning cycle. |
| Robot blokuje się lub porusza się nieregularnie. | Obstruction in pool; tangled cable; air trapped in robot. | Remove obstructions; untangle cable; gently shake robot underwater to release air. |
| Robot does not climb walls or clean waterline. | Clogged filters; water chemistry imbalance (e.g., high calcium); worn brushes. | Clean filters; check pool water chemistry; inspect brushes. |
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Nazwa modelu | Advanced PRO 600 |
| Numer modelu przedmiotu | 125576416 |
| Wymiary produktu (dł. x szer. x wys.) | 14.76" x 14.37" x 7.87" (37.5 cm x 36.5 cm x 20 cm) |
| Waga | 14.3 funta (6.5 kg) |
| Długość kabla | 60 stóp (18 metry) |
| Cleaning Cycle Options | 1.5, 2 lub 2.5 godzin |
| Moc ssania | 70 gpm (16 m³/h) |
| Pobór mocy | 150 W |
| Robot Waterproof Rating | IP68 |
| Transformer IP Rating | IP54 |
| Odpowiedni rozmiar basenu | Up to 40ft x 20ft (in-ground pools) |
| Suitable Pool Types | All surface types, including tiles and liners; suitable for saltwater pools. |
| System filtracji | Dual-level (fine and ultra-fine mesh baskets) |
| Pędzle | 4 independent active scrubbing brushes |
Gwarancja i wsparcie
Informacje o gwarancji
The BWT Advanced PRO 600 Robotic Pool Cleaner comes with an extended 3-year warranty. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and malfunctions under normal use conditions.
Obsługa klienta
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact BWT customer support. Refer to the official BWT webAktualne dane kontaktowe znajdziesz na stronie internetowej lub w dokumentacji zakupu.
Manufacturer: BWT
