1. Koniec produktuview
The CANDY HOUSE SESAME FACE PRO is an advanced smart lock system offering multiple secure access methods. This device integrates face recognition, palm vein recognition, fingerprint scanning, IC card compatibility, and traditional PIN code entry to provide flexible and reliable security for your home or office.
Główne cechy obejmują:
- Wiele metod odblokowania: Face recognition, palm vein recognition, fingerprint, IC card (FeliCa, MIFARE, NFC compatible), and PIN code.
- Wysoka dokładność: Designed for high precision with a false recognition rate of less than 0.0001%.
- Zaawansowane rozpoznawanie twarzy: Functions effectively in low light conditions and accurately recognizes users with makeup or glasses. Resistant to photo or fake hand attempts.
- Extensive User Capacity: Supports up to 100 registered PIN codes, 100 fingerprints, and 1000 IC cards.
- Łatwe zarządzanie: Simple registration and deletion processes for all access methods.
Image 1.1: The SESAME FACE PRO smart lock shown with its accompanying smartphone application interface and a facial recognition mesh diagram.
2. Przewodnik konfiguracji
2.1 Zawartość opakowania
Przed instalacją należy sprawdzić, czy wszystkie komponenty są obecne:
- SESAME FACE PRO Main Unit
- 3M Adhesive Tape (2 sets)
- Battery Cover (1 piece)
- Slide Cover (1 piece)
- CR123A 3.0V 1800mAh Batteries (2 pieces)
- Screws for Main Unit Shell (2 pieces, PM type 1.6x5.0mm)
- Screws for Battery Cover (2 pieces, PM type 2.0x9.0mm)
- Slide Cover Anti-Slip Screw (1 piece, M 1.4x4mm)
- Instrukcja obsługi (1 egzemplarz)
- Karta gwarancyjna (1 egzemplarz)
2.2 Instalacja baterii
The SESAME FACE PRO requires two CR123A lithium metal batteries. Ensure correct polarity when inserting.
- Remove the battery cover from the back of the main unit.
- Insert the two CR123A batteries according to the polarity markings.
- Replace the battery cover and secure it with the provided screws.
Image 2.1: Proper installation of CR123A batteries within the SESAME FACE PRO unit.
2.3 Montaż urządzenia
The SESAME FACE PRO can be mounted using either the included 3M adhesive tape or screws, depending on your door surface and preference.
- Choose a suitable location on your door frame or wall adjacent to the door, ensuring it is within reach and at an appropriate height for face recognition.
- Clean the mounting surface thoroughly to ensure optimal adhesion if using tape.
- Attach the 3M tape to the back of the SESAME FACE PRO unit, or mark screw holes for drilling.
- Secure the unit firmly to the chosen surface.
Obraz 2.2: Przód view of the SESAME FACE PRO, highlighting its various sensors.
Obraz 2.3: Profesjonalizm bocznyfile of the SESAME FACE PRO, illustrating its compact design.
2.4 Initial Administrator Registration
Upon first use, you must register an administrator. This user will have privileges to add or remove other users and manage settings.
- Follow the on-screen prompts or refer to the quick start guide for administrator setup.
- Register your face, fingerprint, and a PIN code as the administrator.
3. Instrukcja obsługi
3.1 Odblokowanie drzwi
The SESAME FACE PRO offers five methods for unlocking:
- Rozpoznawanie twarzy: Approach the device, and it will scan your face for recognition.
- Rozpoznawanie żył dłoniowych: Present your palm to the sensor for vein pattern verification.
- Rozpoznawanie odcisków palców: Połóż zarejestrowany palec na czytniku linii papilarnych.
- Kod PIN: Wprowadź zarejestrowany kod PIN na klawiaturze.
- Karta elektroniczna: Tap a registered FeliCa, MIFARE, or NFC-compatible card (e.g., Suica, PASMO, Apple Watch, mobile Suica) to the card reader area.
Image 3.1: Face recognition in action, showing the device scanning a user's face.
Image 3.2: Palm vein recognition, demonstrating how to present your hand for scanning.
Image 3.3: Fingerprint recognition, showing a finger placed on the sensor.
Image 3.4: IC card recognition, illustrating a Suica card being used to unlock the device.
3.2 Zamykanie drzwi
To lock the door, simply press the lock button on the keypad. The device will confirm the lock status.
3.3 Adding and Deleting Users
Only the administrator can add or delete users. Refer to the detailed instructions in the full manual for specific steps on managing user access for each recognition method.
- Kod PIN: Up to 100 PIN codes can be registered.
- Odcisk palca: Można zarejestrować do 100 odcisków palców.
- Karta elektroniczna: Up to 1000 IC cards can be registered.
4. Konserwacja
4.1 Wymiana baterii
When the battery level is low, the device will provide an alert. Replace the CR123A batteries promptly to ensure continuous operation.
- Otwórz komorę baterii zgodnie z opisem w rozdziale 2.2.
- Wyjmij stare baterie.
- Insert new CR123A batteries, observing correct polarity.
- Zamknij i zabezpiecz pokrywę baterii.
4.2 Czyszczenie
To maintain optimal performance, especially for the sensors, keep the device clean.
- Wytrzyj powierzchnię miękką, suchą szmatką.
- Avoid using abrasive cleaners or solvents that could damage the sensors or finish.
- Ensure the face recognition camera, palm vein sensor, and fingerprint sensor are free from dust and smudges.
Image 4.1: The SESAME FACE PRO is designed with a degree of water resistance for outdoor use.
5. Rozwiązywanie Problemów
If you encounter issues with your SESAME FACE PRO, try the following common solutions:
- Błąd rozpoznania: Ensure the sensors are clean and free from obstructions. Re-register your face, palm, or fingerprint if recognition consistently fails. Ensure adequate lighting for face recognition, though the device is designed for low light.
- Urządzenie nie odpowiada: Check battery levels and replace if necessary. If the device remains unresponsive, perform a factory reset (refer to the full manual for instructions).
- Kod PIN nie działa: Double-check the entered PIN. Ensure the keypad is clean and responsive.
- IC Card Not Detected: Ensure the card is compatible (FeliCa, MIFARE, NFC) and placed correctly on the reader. Re-register the card if needed.
W przypadku powtarzających się problemów prosimy o kontakt z obsługą klienta.
6. Specyfikacje
| Funkcja | Specyfikacja |
|---|---|
| Marka | CUKIEROWY DOM |
| Numer modelu | 860013658205 |
| Wymiary produktu (dł. x szer. x wys.) | 2.81 x 4.76 x 9 cm (1.1 x 1.87 x 3.54 cala) |
| Waga produktu | 250 g (0.55 funta) |
| Kolor | Czarny |
| Źródło zasilania | 2 x CR123A Lithium Metal Batteries |
| Odblokuj metody | Face Recognition, Palm Vein Recognition, Fingerprint, PIN Code, IC Card (FeliCa, MIFARE, NFC) |
| Pojemność kodu PIN | Do 100 |
| Pojemność odcisku palca | Do 100 |
| Pojemność karty IC | Do 1000 |
| Dołączone akcesoria | 3M Tape (2 sets), Battery Cover, Slide Cover, CR123A Batteries (2), Main Unit Screws, Battery Cover Screws, Slide Cover Anti-Slip Screw, Instruction Manual, Warranty Card |
Image 6.1: Detailed dimensions of the SESAME FACE PRO unit.
7. Gwarancja i wsparcie
7.1 Informacje o gwarancji
The CANDY HOUSE SESAME FACE PRO comes with a standard manufacturer's warranty. Please refer to the included warranty card for specific terms, conditions, and duration of coverage. Retain your proof of purchase for warranty claims.
7.2 Obsługa klienta
For technical assistance, troubleshooting, or any questions regarding your SESAME FACE PRO, please contact CANDY HOUSE customer support. Contact details can typically be found on the official CANDY HOUSE webstronie internetowej lub na karcie gwarancyjnej dołączonej do produktu.
