Instrukcja obsługi zestawu lampek rowerowych CYCLAMI CY300T Twin Light

Produkt ponadview

The CYCLAMI CY300T Bicycle Twin Light Combo is designed to enhance visibility and safety for cyclists. This set includes a 300-lumen LED front light and a CY200 Smart Brake Sensing Rear Light. Both units are IPX6 waterproof, lightweight, and feature convenient USB Type-C recharging. They are suitable for various cycling disciplines, including mountain biking, gravel riding, and road cycling.

Image: The CYCLAMI CY300T Bicycle Twin Light Combo, featuring both the front headlight and the rear taillight.

Co jest zawarte

• 1 x CYCLAMI CY300T Front Light (Headlight)
• 1 x CYCLAMI CY200 Rear Light (Taillight)
• 1 x S11 Saddle Bracket (for rear light)
• 1 x S9 Bar Bracket (for front light)
• 2 kable ładujące USB typu C
• User Manuals for CY200 and CY300 (this document serves as a combined guide)

Konfiguracja i instalacja

Front Light Installation (CY300T)

1. Identify the S9 Bar Bracket. This bracket is designed for handlebar mounting.
2. Position the S9 Bar Bracket on your bicycle's handlebar. Ensure it is placed securely and does not obstruct your view lub kontroli nad rowerem.
3. Attach the CY300T Front Light to the S9 Bar Bracket. It should click firmly into place. Verify that the light is stable and facing forward.

Rear Light Installation (CY200)

1. Locate the S11 Saddle Bracket. This bracket is intended for seat bow installation.
2. Securely attach the S11 Saddle Bracket to the seat rails (bow) under your bicycle saddle. Ensure a tight fit to prevent movement during rides.
3. Slide the CY200 Rear Light onto the S11 Saddle Bracket until it locks into position. Confirm that the light is facing directly backward for maximum visibility.

Image: The CY300T front light mounted on a bicycle handlebar, illustrating its high brightness and various lighting modes.

Image: The CY200 rear light installed on a bicycle's seat bow, highlighting its intelligent brake sensing feature and automatic shut-off after inactivity.

Instrukcja obsługi

Ładowanie świateł

Both the CY300T Front Light and CY200 Rear Light are equipped with 600mAh 3.7V rechargeable batteries and utilize USB Type-C for charging.

• Connect the provided USB Type-C cable to the charging port on each light.
• Podłącz drugi koniec kabla do standardowego zasilacza USB (nie ma go w zestawie) lub do portu USB komputera.
• Migające czerwone światło wskazuje, że urządzenie jest ładowane.
• A solid green light indicates that the battery is fully charged.
• Pełne naładowanie trwa zazwyczaj około 1.5 godzin.

Image: A CYCLAMI light connected for Type-C charging, with indicators showing charging status (red for charging, green for full) and an estimated charging time of 1.5 hours.

CY300T Front Light Operation

The CY300T Front Light offers multiple lighting modes for various riding conditions.

• Włączanie/wyłączanie: Press and hold the power button for 2 seconds to turn the light on or off.
• Change Main Light Mode: Single click the power button to cycle through the main light modes (e.g., High Light, Low Light, Flash/Daytime Running Light, Full Brightness).
• Change Secondary Light Mode: Double click the power button to cycle through secondary light modes (e.g., Runners Light).
• Jasność: The front light provides up to 300 lumens of brightness.

CY200 Rear Light Operation

The CY200 Rear Light features intelligent brake sensing for enhanced safety.

• Włączanie/wyłączanie: Press and hold the power button for 2 seconds to turn the light on or off.
• Zmień tryb: Aby przełączać się między dostępnymi trybami oświetlenia, wystarczy kliknąć raz przycisk zasilania.
• Inteligentny czujnik hamulca: The light automatically detects braking and activates a high-brightness mode to alert following traffic.
• Automatyczne wyłączanie: If the light detects no movement for 30 seconds, it will automatically turn off to conserve battery. It will wake up upon detecting vibration.
• Jasność: The rear light provides up to 200 lumens of brightness.

Konserwacja

• Czyszczenie: Przetrzyj światła miękką szmatką.amp Ściereczką usuń brud i zanieczyszczenia. Nie używaj środków czyszczących ani rozpuszczalników o działaniu ściernym.
• Wodoodporność: Both lights are IPX6 waterproof, meaning they are protected against powerful water jets. They are suitable for use in rainy conditions but should not be submerged in water.
• Pielęgnacja baterii: To prolong battery life, charge the lights regularly, especially if they have not been used for an extended period. Avoid completely draining the battery before recharging.
• Składowanie: Kiedy nie używasz świateł, przechowuj je w chłodnym i suchym miejscu.

Rozwiązywanie problemów

• Światło się nie włącza:
  • Ensure the battery is charged. Connect to a USB Type-C charger and check the charging indicator.
  • Press and hold the power button for at least 2 seconds to ensure proper power-on sequence.
• Light Does Not Hold Charge:
  • Verify the USB Type-C cable and charging adapter are functioning correctly. Try a different cable or adapter.
  • Upewnij się, że port ładowania w lampie jest czysty i wolny od zanieczyszczeń.
• Rear Light Brake Sensing Not Working:
  • Ensure the light is securely mounted and not loose, as excessive vibration might interfere with the sensor.
  • The sensor relies on deceleration; ensure your braking motion is distinct.
• Light Falls Off Mount:
  • Ensure the bracket is tightly secured to the handlebar or seat bow.
  • Verify that the light is fully clicked into the bracket. A firm click should be heard.

Specyfikacje

Image: Detailed comparison table outlining specifications such as luminance, battery capacity, lighting modes, battery life, shell material, size, weight, waterproofing, charging method, and battery level alert for CY200 and CY300 lights.

Informacje o gwarancji

The CYCLAMI CY300T Bicycle Twin Light Combo comes with a 6-miesięczna gwarancja od daty zakupu. Niniejsza gwarancja obejmuje wady produkcyjne i materiałowe powstałe w wyniku normalnego użytkowania. Nie obejmuje uszkodzeń spowodowanych niewłaściwym użytkowaniem, wypadkami, nieautoryzowanymi modyfikacjami ani normalnym zużyciem.

Proszę zachować dowód zakupu na wypadek ewentualnych roszczeń gwarancyjnych.

Obsługa klienta

For any questions, technical assistance, or warranty claims regarding your CYCLAMI CY300T Bicycle Twin Light Combo, please contact your retailer or the manufacturer directly.

Producent: Zhuhai Kungfu Home Technology Co. Ltd

For the most up-to-date support contact information, please refer to the packaging or the official CYCLAMI webstrona.