Wstęp
The M5Stamp Fly is an advanced, open-source quadcopter development kit designed for education, research, and various drone development projects. It features the powerful M5StampS3 as its main controller, integrating a comprehensive suite of sensors for precise flight control and environmental interaction. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your M5Stamp Fly kit.
It is recommended to use the M5Stamp Fly with an M5Atom Joystick Bluetooth Controller (sold separately) for optimal control and functionality.
Produkt ponadview
The M5Stamp Fly kit is engineered with a focus on programmability and sensor integration, making it a versatile platform for drone enthusiasts and developers.
Koszty ogólne view of the M5Stamp Fly drone, showcasing its compact design, four propellers with protective guards, and the central M5StampS3 controller board. The board features various components and connectors, including a USB port.
Główne cechy:
- Główny kontroler: M5StampS3 with ESP32-S3 microcontroller, offering advanced features such as WiFi and OTG/CDC support.
- Zintegrowane czujniki:
- BMI270 6-axis gyroscope and BMM150 3-axis magnetometer for attitude and direction detection.
- BMP280 barometric pressure sensor for precise altitude hold.
- Two VL53L3 distance sensors for obstacle avoidance.
- PMW3901MB-TXQT optical flow sensor for hovering and displacement detection.
- INA3221AIRGVR for real-time current/voltagmonitorowanie.
- System zasilania: 300mAh high-voltage lithium battery and four high-speed coreless motors.
- Elementy interaktywne: Built-in passive buzzer for audio feedback, WS2812 RGB LEDs for status indication, and a reset button.
- Ekspansja: Two Grove connectors for additional sensors and peripherals, enabling extensive customization.
- Kontrola: Preloaded with debugging firmware, controllable via ESP-NOW protocol (e.g., with M5Atom Joystick). Supports automatic and manual flight modes.
- Open-Source: Firmware source code is open-source, facilitating learning and development.
Przewodnik po konfiguracji
1. Rozpakowanie i inspekcja
Carefully remove all components from the packaging. Verify that all items listed in the product description are present and undamaged. The kit includes the M5Stamp Fly drone and a 300mAh lithium battery.
2. Montaż i ładowanie akumulatora
- Locate the battery connector on the M5Stamp Latać.
- Connect the provided 300mAh lithium battery to the drone's battery port. Ensure the polarity is correct.
- Before first use, fully charge the battery using a compatible USB charger connected to the drone's USB-C port. The charging indicator (if present, typically an LED) will change status upon full charge.
3. Pierwsze włączenie zasilania i sprawdzenie oprogramowania sprzętowego
- Once the battery is connected, the drone should power on. Observe the WS2812 RGB LEDs for initial status indications.
- The M5Stamp Fly comes preloaded with debugging firmware. For advanced development or custom firmware, refer to the official M5Stack documentation and GitHub repositories for flashing instructions.
4. Connecting to a Controller (e.g., M5Atom Joystick)
- If using an M5Atom Joystick (sold separately), ensure it is also powered on and configured for ESP-NOW communication.
- Follow the pairing instructions provided with your M5Atom Joystick to establish a connection with the M5Stamp Fly. This typically involves a specific button sequence or software configuration.
Instrukcja obsługi
1. Lista kontrolna przed lotem
- Upewnij się, że bateria jest w pełni naładowana.
- Sprawdź, czy wszystkie śmigła są solidnie zamocowane i nieuszkodzone.
- Sprawdź, czy w obszarze lotu nie ma przeszkód ani ludzi.
- Ensure the M5Stamp Fly and your controller are properly paired and communicating.
2. Tryby lotu
The M5Stamp Fly supports both automatic and manual flight modes, depending on the loaded firmware and controller capabilities.
- Tryb automatyczny: Utilizes integrated sensors (VL53L3 for distance, BMP280 for altitude, PMW3901MB-TXQT for optical flow) to assist with stable hovering, altitude hold, and obstacle avoidance. This mode is ideal for beginners or for precise maneuvers like flips.
- Tryb ręczny: Provides direct control over the drone's movements, relying more on user input. This mode is suitable for experienced users or for custom flight patterns.
3. Basic Flight Controls (with M5Atom Joystick example)
While specific controls may vary based on firmware and controller, typical drone controls include:
- Przepustnica (ruch pionowy): Typically controlled by the left joystick (up/down).
- Yaw (Rotation): Typically controlled by the left joystick (left/right).
- Pitch (Forward/Backward): Typically controlled by the right joystick (up/down).
- Roll (Left/Right Sideways Movement): Typically controlled by the right joystick (left/right).
- Start/Lądowanie: Often a dedicated button or a specific joystick combination.
- Flips/Special Maneuvers: Activated via specific button presses or joystick movements in automatic mode.
Always refer to the specific documentation for the firmware loaded on your M5Stamp Fly and your chosen controller for detailed control mapping.
4. Sensor Utilization
- VL53L3 Distance Sensors: Used for obstacle detection and avoidance. The drone can be programmed to automatically adjust its flight path when an obstacle is detected within a certain range.
- BMP280 Barometric Pressure Sensor: Provides accurate altitude readings, enabling stable altitude hold functionality.
- PMW3901MB-TXQT Optical Flow Sensor: Essential for precise hovering and displacement detection, especially in indoor environments where GPS signals are unavailable.
Konserwacja
1. Pielęgnacja baterii
- Always use the recommended charging method.
- Nie należy przeładowywać ani nadmiernie rozładowywać akumulatora.
- Przechowuj baterie w chłodnym i suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.
- Jeśli bateria puchnie lub wykazuje oznaki uszkodzenia, należy natychmiast zaprzestać jej używania i poddać odpowiedniej utylizacji.
2. Kontrola i wymiana śmigła
- Regularly inspect propellers for cracks, bends, or chips. Damaged propellers can affect flight stability and efficiency.
- To replace a propeller, gently pull the old one off the motor shaft and push a new one firmly into place. Ensure the correct propeller type (clockwise/counter-clockwise) is installed on the correct motor.
3. Czyszczenie
- Use a soft, dry cloth to clean the drone's body and components.
- Avoid using liquid cleaners or solvents, as they may damage electronic components.
- Gently remove any dust or debris from sensors and motor areas using a soft brush or compressed air.
4. Aktualizacje oprogramowania sprzętowego
Periodically check the official M5Stack website or GitHub repository for firmware updates. Updates can improve performance, add new features, or fix bugs. Follow the provided instructions carefully when performing firmware updates.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Dron się nie włącza. | Akumulator nie jest podłączony lub jest rozładowany. | Ensure battery is securely connected and fully charged. |
| Dron nie reaguje na polecenia kontrolera. | Not paired, out of range, or controller battery low. | Re-pair the drone and controller. Ensure they are within range. Charge controller battery. |
| Niestabilny lot lub dryfowanie. | Damaged propellers, uncalibrated sensors, or uneven motor thrust. | Inspect and replace damaged propellers. Perform sensor calibration (if supported by firmware). Check for debris in motors. |
| Unikanie przeszkód nie działa. | VL53L3 sensors obstructed or firmware issue. | Clean sensor lenses. Verify obstacle avoidance is enabled in firmware settings. |
| Krótki czas lotu. | Battery degradation or inefficient flight. | Ensure battery is fully charged. Consider replacing old batteries. Optimize flight patterns. |
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | M5Stack |
| Nazwa modelu | M5Stamp Latać |
| Numer modelu | K138 |
| Główny kontroler | M5StampS3 (ESP32-S3) |
| Łączność | Bluetooth, USB, Wi-Fi (ESP-NOW protocol for control) |
| Bateria | 300mAh High-Voltage Lithium Battery (Included) |
| Silniki | Four High-Speed Coreless Motors |
| Czujniki | BMI270 (6-axis Gyroscope), BMM150 (3-axis Magnetometer), BMP280 (Barometric Pressure), 2x VL53L3 (Distance), PMW3901MB-TXQT (Optical Flow), INA3221AIRGVR (Current/Voltag(Monitorowanie) |
| Wymiary | 3.2" dł. x 3.2" szer. x 1.22" wys. (w przybliżeniu) |
| Waga przedmiotu | 36.8 gramów (ok. 1.3 uncji) |
| Tworzywo | Włókno węglowe, plastik |
| Zakres wiekowy (opis) | 10+ lat |
| Poziom umiejętności | Mediator |
| Maksymalny zasięg | 3 Meters (Control range, may vary with environment) |
| Temperatura pracy | Do 40 stopni Celsjusza |
Gwarancja i wsparcie
Aby uzyskać szczegółowe informacje dotyczące gwarancji, zapoznaj się z oficjalną instrukcją obsługi M5Stack website or the documentation included with your purchase. M5Stack provides resources and support for their open-source products.
For technical support, firmware updates, and community forums, please visit the Oficjalny M5Stack Webstrona lub ich Repozytorium GitHub.
Additional protection plans may be available for purchase from your retailer. Please check with your point of purchase for details on extended warranties or service plans.
