Eridanus ERI-WT425

Eridanus Wall Hung Toilet with Tank

Model: ERI-WT425

Instrukcja obsługi

Ważne informacje

Przed instalacją i użytkowaniem prosimy o dokładne zapoznanie się z niniejszą instrukcją. Zachowaj instrukcję do wykorzystania w przyszłości.

Notatka: The toilet and tank are shipped in two separate packages and may not arrive at the same time. Ensure all packages are received before beginning installation.

Co jest w pudełku

Przed przystąpieniem do instalacji sprawdź, czy wszystkie wymienione poniżej elementy są obecne i nieuszkodzone.

Diagram showing all components included in the Eridanus Wall Hung Toilet package, separated into Box-1 (toilet bowl, seat, mounting hardware) and Box-2 (in-wall tank carrier system, flush plate, pipes).

Figure 1: Included Components. Box-1 contains the Wall Hung Toilet, Removable Cover & Seat, Cover & Seat Mounting Bolt Kit, Toilet Mounting Bolt Kit, and Installation Instruction. Box-2 contains the Carrier and Tank, Rough-in Box, Pipe Clamp, Toilet Bolt Kit, Silicone Grease, Flush & Drain Pipes, Discharge Elbow, Protection Plugs, Protection Foam, Mounting Stud, Carrier Fixings Kit, and Flush Plate Installation Kit.

Dane techniczne i wymiary

Review the technical specifications and dimensions to ensure compatibility with your bathroom space and plumbing.

Technical data diagram for Eridanus Wall Hung Toilet ERI-WT425 showing side and top view dimensions in inches.

Figure 2: Technical Data for ERI-WT425. Dimensions include 20 7/8" length, 14 1/2" height, and 10 3/4" width. Please check overall dimensions and rough-in for your location prior to purchase. All dimensions are nominal with a tolerance of up to 2%.

Dimension guide for Eridanus Wall Hung Toilet ERI-WT425 showing side, front, and top view with key measurements.

Figure 3: Dimension Guide for ERI-WT425. This diagram provides detailed measurements for the toilet bowl, including length, width, and height from various angles. It is crucial to verify these dimensions against your installation space.

Dane techniczne:

Numer modeluERI-WT425
KolorBiały
Materiał (toaleta)Ceramiczny
Materiał (siedzisko)Polipropylen (PP)
Typ instalacjiMontaż na ścianie
Stud CompatibilityFits 2x4 Studs
System spłukiwaniaDual Flush (0.8/1.6 GPF)
Pojemność zbiornika2.2 Gallons (Concealed)
Maximum Weight Capacity (Frame)880 funtów
Regulowana wysokość0-8 3/4 inches

Konfiguracja i instalacja

Professional installation is recommended. Follow these steps carefully for proper setup.

Instrukcja wideo instalacji

Video 1: Wall Hung Toilet Installation Guide. This video provides a visual step-by-step guide for installing the in-wall tank carrier system and the wall-hung toilet bowl.

Key Installation Steps (Refer to video for details)

  1. Przygotuj ścianę: Mark the desired height and position for the in-wall tank carrier system. Ensure the wall structure (2x4 studs) can support the unit.
  2. Mount the Carrier Frame: Securely attach the carrier frame to the wall studs and floor using the provided mounting hardware. Adjust the height as needed.
    Diagram showing secure installation of the in-wall tank carrier system, bolted to wall studs and affixed to the floor.

    Figure 4: Secure Installation of the In-Wall Carrier. The frame is mounted to the wall using metal brackets and bolted to wall studs, then affixed to the floor.

  3. Podłącz hydraulikę: Install the water supply line and the discharge pipe to the in-wall tank. Ensure all connections are watertight.
  4. Install Rough-in Box and Flush Plate Mechanism: Place the rough-in box and connect the flush plate mechanism. Trim the box to match the wall finish.
    Diagram illustrating the In-Wall Toilet Tank Carrier System with dual flush, large capacity tank, stainless steel frame, and adjustable height, designed for 2x4 wall stud construction.

    Figure 5: In-Wall Toilet Tank Carrier System. This diagram highlights features like dual flush, 2.2 GAL tank, 880 lbs capacity stainless steel frame, and adjustable height for 2x4 wall studs.

  5. Finish Wall: Cover the in-wall tank and carrier with drywall or tile, leaving access for the flush plate and toilet mounting points.
  6. Mount Toilet Bowl: Attach the toilet bowl to the mounting studs protruding from the wall. Connect the flush and drain pipes to the bowl.
  7. Montaż deski sedesowej: Secure the soft-close toilet seat and cover to the bowl.
  8. Install Flush Plate: Attach the dual-flush plate to the rough-in box, connecting it to the flush mechanism.
  9. Test: Perform a flush test to check for leaks and proper operation.

Instrukcja obsługi

The Eridanus Wall Hung Toilet features a dual-flush system for water conservation and a soft-close seat for quiet operation.

Konserwacja

Regular cleaning and maintenance will ensure the longevity and optimal performance of your Eridanus Wall Hung Toilet.

Rozwiązywanie problemów

W tej sekcji omówiono typowe problemy, które mogą wystąpić. W przypadku problemów, których tutaj nie wymieniono, skontaktuj się z obsługą klienta.

ProblemMożliwa przyczynaRozwiązanie
Toaleta nie spłukuje lub spłukuje słabo
  • Zawór dopływu wody zamknięty
  • Flush mechanism obstruction
  • Niskie ciśnienie wody
  • Open the water supply valve fully.
  • Inspect the flush mechanism inside the tank for any blockages.
  • Sprawdź ciśnienie wody w gospodarstwie domowym.
Continuous running water
  • Flapper or fill valve issue
  • Flush plate mechanism stuck
  • Access the in-wall tank (via flush plate opening) and inspect the flapper and fill valve for proper seating or damage. Adjust or replace as needed.
  • Ensure the flush plate buttons are not stuck.
Leaks around the toilet base or connections
  • Luźne połączenia
  • Uszkodzone uszczelki
  • Carefully inspect all visible connections and tighten if loose.
  • If seals are damaged, professional assistance may be required to replace them.

Gwarancja i wsparcie

Eridanus is committed to providing quality products and customer satisfaction.

Image detailing Eridanus Premium Support, including 1 Year Part Replacement, 24 Hours Customer Assistance, 30 Days Easy Returns, and Lifetime Service.

Figure 10: Eridanus Premium Support. This image outlines the support services available, including part replacement, customer assistance, returns, and lifetime service.

Powiązane dokumenty - ERI-WT425

Przedview Instrukcja obsługi inteligentnej toalety Eridanus: funkcje, instalacja i rozwiązywanie problemów
Kompleksowa instrukcja obsługi inteligentnej toalety Eridanus. Dowiedz się więcej o instalacji, funkcjach, obsłudze, konserwacji, rozwiązywaniu problemów i często zadawanych pytaniach. Zawiera specyfikację techniczną.
Przedview Eridanus Mason Smart Toilet ERI-ST270-S: Features, Specifications, and Installation Guide
Discover the Eridanus Mason Smart Toilet (ERI-ST270-S). This document details its advanced features, technical specifications, installation requirements, included components, and available finishes. Ideal for modern bathrooms seeking comfort and smart technology.
Przedview Instrukcja montażu cysterny na toaletę ERIDANUS
Kompleksowy przewodnik montażu zbiornika na toaletę ERIDANUS, szczegółowo opisujący narzędzia, części i instrukcje krok po kroku dotyczące prawidłowego montażu w różnych typach ścian.
Przedview Instrukcja obsługi inteligentnej toalety Eridanus: funkcje, instalacja i rozwiązywanie problemów
Kompleksowa instrukcja obsługi inteligentnej toalety Eridanus, obejmująca konfigurację, funkcje, obsługę, instalację, konserwację i rozwiązywanie problemów. Dowiedz się, jak korzystać z inteligentnej toalety, aby zapewnić optymalny komfort i higienę.
Przedview Instrukcja obsługi inteligentnej toalety ERIDANUS ERI-ST210-S: funkcje, instalacja i rozwiązywanie problemów
Kompleksowa instrukcja obsługi inteligentnej toalety ERIDANUS ERI-ST210-S. Dowiedz się więcej o jej funkcjach, instrukcji instalacji, obsłudze, konserwacji i wskazówkach dotyczących rozwiązywania problemów, aby zapewnić optymalne użytkowanie.
Przedview Instrukcja instalacji inteligentnej toalety ERIDANUS
Kompleksowy przewodnik instalacji inteligentnej toalety ERIDANUS, obejmujący rozpakowanie, przygotowanie, kroki instalacji i kontrole końcowe. Zawiera listę części i narzędzia niezbędne do prawidłowej konfiguracji.