Coway Bidetmega 500S Round Electronic Bidet Toilet Seat User Manual

1. Ważne informacje dotyczące bezpieczeństwa

Przed instalacją i użytkowaniem należy uważnie przeczytać wszystkie instrukcje. Zachowaj tę instrukcję do wykorzystania w przyszłości.

• Bezpieczeństwo elektryczne: Ensure the bidet is connected to a grounded 120V/60Hz power outlet. Do not use extension cords. Disconnect power before cleaning or servicing.
• Ciśnienie wody: The operating tapwater pressure should be between 14.5 PSI and 100 PSI.
• Temperatura wody: Do not use water hotter than 104°F (40°C) to avoid burns.
• Dzieci i osoby o ograniczonej sprawności: To urządzenie nie jest przeznaczone do użytku przez osoby (w tym dzieci) o ograniczonych zdolnościach fizycznych, sensorycznych lub umysłowych lub z brakiem doświadczenia i wiedzy, chyba że są one nadzorowane lub poinstruowane w zakresie korzystania z urządzenia przez osobę odpowiedzialną za ich bezpieczeństwo. Dzieci powinny być nadzorowane, aby mieć pewność, że nie bawią się urządzeniem.
• Czyszczenie: Do not spray water directly onto the appliance. Use a soft, damp ściereczka do czyszczenia.
• Instalacja: Ensure the toilet bowl type (Round or Elongated) matches the bidet seat model.

2. Koniec produktuview

The Coway Bidetmega 500S Round Electronic Bidet Toilet Seat offers advanced hygiene features for enhanced comfort and cleanliness.

Główne cechy:

• i-wave Cleaning Technology: Multi-stage wash care system with customizable water pressure, motion, and spray patterns (Rear, Front, Turbo, Move, Air+, Wide).
• Instantaneous Water Heating: Provides continuous warm water without a tank, saving energy.
• Podgrzewane siedzenie: Regulowana temperatura dla zapewnienia komfortu.
• Suszarka na ciepłe powietrze: Reduces the need for toilet paper.
• Auto Open and Close Lid: Touchless operation for convenience and hygiene.
• Światło nocne: Soft glow illuminates the toilet for nighttime use.
• Środek dezodoryzujący: Activated carbon filtration removes odors.
• Dysza ze stali nierdzewnej: Durable and hygienic.
• Triple Hygiene Care: WaterShield mist, auto cleaning nozzle, and UV light nozzle sterilization.
• Bezprzewodowy pilot zdalnego sterowania: For easy operation and personalized settings (user profiles, child mode).
• Łatwa instalacja: Zaprojektowane z myślą o prostej konfiguracji.

Rysunek 2.1: Koniecview of Coway Bidetmega 500S features including i-wave cleaning, triple hygiene care, ideal temperature control, triple environment care, and easy installation.

3. Konfiguracja i instalacja

This section provides step-by-step instructions for installing your Bidetmega 500S. Ensure you have all components listed in the manual's parts overview przed rozpoczęciem.

3.1 Lista kontrolna przed instalacją

• Sprawdź pojtage (120V/60Hz) and use a grounded power outlet.
• Confirm operating tapwater pressure (14.5 PSI ~ 100 PSI).
• Ensure your toilet bowl is Round and matches the bidet type. Refer to the dimensions diagram below.

Figure 3.1: Toilet bowl type selection guide with dimensions for Round and Elongated bowls. Ensure your toilet matches the Round type for this model.

3.2 Water Source Connection

1. Remove the existing toilet seat and lid.
2. Turn off the water supply valve to the toilet and flush the toilet to drain the tank.
3. Disconnect the water supply hose from the toilet's water supply pipe.
4. Connect the provided 7/8" T-valve to the water supply valve.
5. Connect the original water supply hose to the T-valve.
6. Connect the bidet hose to the T-valve and then to the bidet seat's water inlet. Ensure all connections are tight to prevent leaks.
7. (Optional) The mesh filter inside the water inlet is detachable for cleaning.

3.3 Instalacja produktu

1. Insert the fixing nuts into the toilet holes.
2. Place the fixer bracket over the nuts, aligning the fixing slides and washers.
3. Insert the fixing screws and tighten them clockwise to secure the bracket.
4. Gently slide the bidet seat onto the bracket until you hear a click sound, indicating it is securely in place.
5. Connect the 2-way power cord to the bidet seat and then plug it into a grounded electrical outlet.

Figure 3.2: Illustration of the 2-way power cord and bidet hose connection for easy installation.

4. Instrukcja obsługi

Your Bidetmega 500S is designed for intuitive operation using the wireless remote control. The remote automatically pairs with your bidet.

4.1 Funkcje zdalnego sterowania

The remote control features two displays (front and rear) for various settings:

• Wyświetlacz przedni: Stop, Rear Mode (General/Course), Front Mode (General/Course), Turbo, Dry, Water Pressure adjustment, Nozzle Position adjustment, User 1/User 2 profiles, Battery Indicator.
• Wyświetlacz tylny: Move, Air+, Wide, Nozzle UV, Deodorizer, Seat Temp, Water/Dry Temp.
• Lid Button (Top): Press to open/close the lid. The lid also closes automatically after use.

Figure 4.1: Remote control layout showing all available functions for personalized hygiene.

4.2 i-wave Cleaning Technology

Select from various wash modes and customize your experience:

• Rear Mode: Precise and comfortable wash for daily use. Single press for General (1-stage wash), double press for Course (3-stage wash: Soft Start, Main Wash, Rinse Wash).
• Front Mode: Sensitive wash, ideal for feminine hygiene. Single press for General (1-stage wash), double press for Course (3-stage wash).
• Tryb turbo: Maximum strength wash with Air+ bubbles (1-stage wash only).
• Przenosić: The nozzle moves back and forth for a comprehensive clean.
• Air+: Adds more bubbles to the water stream for enhanced cleaning.
• Szeroki: Expands the spray range for soft cleaning on sensitive skin.

Figure 4.2: Visual representation of the i-wave 3-stage cleaning technology and various wash modes.

4.3 Temperature Control & Comfort Features

• Podgrzana woda: Adjust water stream temperature using the remote (4 settings: off, 1, 2, 3).
• Podgrzewane siedzenie: Select from 4 temperature settings (off, 1, 2, 3) for the seat, includes overheat protection.
• Suszarka: Adjust warm air dryer temperature using the remote (4 settings: off, 1, 2, 3).
• Światło nocne: Provides soft illumination for convenience during nighttime.
• Środek dezodoryzujący: Activated carbon filtration automatically removes odors.

Figure 4.3: Illustration of adjustable heated water, heated seat, and built-in dryer functions.

4.4 Zaawansowany użytkownikfiles & Child Mode

• Użytkownik Profiles: Oszczędź do 2 niestandardowych profiles for personalized wash and other settings.
• Tryb dziecięcy: Included in profile 1 by default for family use.

5. Konserwacja i czyszczenie

Regular maintenance ensures optimal performance and hygiene of your Bidetmega 500S.

5.1 Czyszczenie dyszy

• Auto Cleaning Nozzle: Dysza czyści się automatycznie przed i po każdym użyciu.
• UV Cleaning Nozzle: The nozzle UV light activates after 12 usages or a single usage in 36 hours to sterilize the nozzle. This can also be activated manually via the remote.

Figure 5.1: Triple Hygiene Care features: WaterShield, Auto Cleaning Nozzle, and UV Cleaning Nozzle.

5.2 WaterShield™

When seated, a water mist is sprayed into the bowl to prevent contamination, helping to maintain cleanliness with every flush. This feature can be turned on/off as needed.

5.3 Deodorization Filter

The deodorization filter uses activated carbon filtration to remove waste odors. The filter needs to be changed once a year. A detailed text description accompanying each image for users who cannot view To.

Figure 5.2: Instructions for accessing and replacing the deodorization filter.

5.4 Quick-Release for Cleaning

To remove the bidet seat for thorough cleaning, press the release button located on the side and slide the unit off the bracket.

Figure 5.3: Quick-release mechanism for easy removal and cleaning of the bidet seat.

6. Rozwiązywanie Problemów

If you encounter any issues with your Bidetmega 500S, please refer to the following common troubleshooting steps:

• Brak zasilania: Ensure the power cord is securely plugged into a grounded outlet. Check if the outlet is functional by plugging in another device.
• Brak strumienia wody: Verify that the water supply valve is fully open. Check if the mesh filter is clogged and requires cleaning.
• Słabe ciśnienie wody: Check the water supply valve and mesh filter for any obstructions. Adjust water pressure settings on the remote control.
• Heated Seat/Water Not Working: Ensure the temperature settings are correctly adjusted on the remote.
• Pilot nie odpowiada: Check the battery indicator on the remote and replace batteries if necessary. Ensure there are no obstructions between the remote and the bidet.
• Pokrywa nie otwiera się/nie zamyka automatycznie: Check for any physical obstructions. Ensure the auto-open/close feature is enabled via the remote if applicable.

For persistent issues, please contact Coway customer support.

7. Specyfikacje

8. Gwarancja i pomoc techniczna

For warranty information, product registration, or technical assistance, please contact Coway customer support. Keep your purchase receipt for warranty claims.

Contact information can typically be found on the Coway official webmiejscu lub w opakowaniu produktu.