OSRAM LEDguardian ROAD FLARE Signal V16 IoT User Manual

1. Wprowadzenie

The OSRAM LEDguardian ROAD FLARE Signal V16 IoT is a DGT 3.0 certified LED warning light designed to enhance roadside safety. This device provides a highly visible signal to alert other drivers to your presence in emergency situations. It features real-time localization capabilities and is mandatory for use in Spain from January 1, 2026, replacing traditional warning triangles.

Główne cechy obejmują:

• 360° amber flashing light for maximum visibility.
• DGT 3.0 certification with anonymous data transfer to the DGT platform for real-time vehicle localization.
• 140 lumen light output with a range of up to 1000 meters.
• Integrated 9V battery providing up to 2.5 hours of operation.
• Magnetic base for quick and secure attachment to vehicle surfaces.
• Durable and weather-resistant design (IP54 rated).

2. Informacje dotyczące bezpieczeństwa

• Always ensure the device is securely attached to a metallic surface on your vehicle, such as the roof, to prevent it from falling.
• Do not stare directly into the light source when activated, as it can cause eye strain.
• This device is intended as a warning signal. It does not replace the need to contact emergency services (police, ambulance, etc.) in case of an accident or breakdown.
• Check local traffic regulations regarding the use of auxiliary warning lights, especially outside of Spain.
• Przechowywać w miejscu niedostępnym dla dzieci.

3. Zawartość opakowania

Sprawdź, czy wszystkie elementy są obecne:

• 1 x OSRAM LEDguardian ROAD FLARE Signal V16 IoT device
• 1 x 9V battery (pre-installed or separate)
• Instrukcja obsługi (ten dokument)

4. Konfiguracja

4.1. Instalacja baterii

The device typically comes with a 9V battery pre-installed. If not, or if replacing the battery:

1. Znajdź pokrywę komory baterii na spodzie urządzenia.
2. Aby otworzyć pokrywę, przekręć ją lub przesuń.
3. Włóż nową baterię 9 V, zwracając uwagę na prawidłową biegunowość (+/-).
4. Dokładnie zamknij pokrywę komory baterii.

A battery indicator is present to inform you about the battery status.

4.2. Initial Activation and DGT 3.0 Connectivity

The device is designed for immediate use. Upon activation, it automatically connects to the DGT 3.0 platform to signal your vehicle's position. No manual setup for connectivity is required from the user.

Diagram illustrating DGT 3.0 connectivity and real-time localization. The warning light sends anonymous data to the DGT 3.0 platform, which then relays the vehicle's position to other road users and emergency services.

5. Instrukcja obsługi

5.1. Activating the Warning Light

To activate the amber flashing warning light:

1. Remove the device from its storage location (e.g., glove compartment).
2. Press the main power button located on the top of the device. The amber flashing light will activate automatically.
3. Place the device on a flat, metallic surface of your vehicle, such as the roof, using its magnetic base. Ensure it is stable and visible from all directions.

Collage showing various ways to deploy and activate the OSRAM LEDguardian ROAD FLARE Signal V16 IoT, including placing it on a vehicle roof and holding it for activation.

The OSRAM LEDguardian ROAD FLARE Signal V16 IoT deployed on a vehicle roof at night, providing high visibility.

5.2. Using the Flashlight Function

The device also includes a white light flashlight function for practical use during emergencies, such as inspecting a tire or finding items in the dark.

1. To activate the flashlight, press the dedicated flashlight button (often indicated by a light bulb icon).
2. Naciśnij ponownie, aby wyłączyć latarkę.

6. Konserwacja

6.1. Wymiana baterii

When the battery indicator shows low power, replace the 9V battery following the instructions in Section 4.1. Use only high-quality 9V alkaline batteries for optimal performance and battery life.

6.2. Czyszczenie

Wyczyść urządzenie miękką,amp ściereczką. Nie używaj środków czyszczących o działaniu ściernym ani rozpuszczalników, ponieważ mogą one uszkodzićasing or internal components. Ensure the device is dry before storage.

7. Rozwiązywanie Problemów

• Urządzenie nie włącza się: Sprawdź, czy bateria 9 V jest prawidłowo zainstalowana i wystarczająco naładowana. W razie potrzeby wymień baterię.
• Światło jest słabe: This indicates a low battery. Replace the 9V battery.
• Device not adhering to vehicle: Ensure the surface is clean, dry, and metallic. The magnetic base requires a suitable metal surface for secure attachment.
• DGT 3.0 connectivity issues: The device is designed for automatic connectivity. If you suspect issues, ensure the device is activated and in an open area with clear signal reception. Contact OSRAM support if problems persist.

8. Specyfikacje

Szczegółowy view of the OSRAM LEDguardian ROAD FLARE Signal V16 IoT with key features labeled, including DGT 3.0 certification, weather resistance, battery indicator, LED count, light range, magnetic base, and integrated SIM card.

Technical drawing showing the dimensions of the OSRAM LEDguardian ROAD FLARE Signal V16 IoT, with height and diameter measurements.

9. Gwarancja i wsparcie

For warranty information, technical support, or service inquiries, please refer to the official OSRAM website or contact your local OSRAM dealer. Keep your purchase receipt as proof of purchase.