1. Koniec produktuview
This module is designed to integrate Wireless CarPlay and Android Auto functionalities into your Volkswagen Touareg RNS850 infotainment system. It allows access to navigation, phone contacts, email, notifications, and music through an intelligent voice assistant, enhancing driving safety and convenience.
Informacja o zgodności: This module is compatible with Volkswagen Touareg RNS 850 models from 2011-2015. It only supports screens with a size of 8 inches and does not support 6-inch screens. Please verify your vehicle's screen size before installation.

Image: The Wireless CarPlay/Android Auto module shown above a Volkswagen Touareg dashboard displaying the CarPlay interface.
2. Informacje dotyczące bezpieczeństwa
Please read all safety instructions carefully before installation and operation. Failure to do so may result in damage to the product, vehicle, or personal injury.
- Aby zapobiec zwarciom elektrycznym lub uszkodzeniom, przed rozpoczęciem jakichkolwiek prac instalacyjnych należy upewnić się, że zapłon pojazdu jest wyłączony, a akumulator odłączony.
- If you are not confident with automotive electrical systems or dashboard disassembly, seek professional installation.
- Do not attempt to modify the module or its components. Unauthorized modifications will void the warranty.
- Keep the module away from water, excessive heat, and direct sunlight.
- Ensure all cables are securely connected and routed to avoid interference with vehicle controls or moving parts.
3. Zawartość opakowania
Sprawdź, czy w przesyłce znajdują się wszystkie wymienione poniżej elementy:
- Wireless CarPlay/Android Auto Module
- Kabel zasilający
- LVDS Cables (x2)
- Kabel USB
- Antena WiFi
- OBD Activation Cable (for AUX activation)

Image: A visual representation of the module and all included cables and accessories.
4. Instrukcja instalacji
Installation of this module requires a moderate skill set, involving the disassembly and reassembly of parts of your vehicle's dashboard. All connections are plug-and-play, meaning no wire cutting or splicing is required.
4.1. Kroki przed instalacją
- Przygotowanie pojazdu: Park your vehicle on a flat, stable surface. Turn off the ignition and remove the key. Disconnect the negative terminal of the car battery.
- Zbierz narzędzia: You will need standard automotive trim removal tools, screwdrivers, and potentially a socket wrench set.
- Materiały referencyjne: It is highly recommended to search for specific installation videos for the "Volkswagen Touareg RNS850 CarPlay module" on video-sharing platforms. Many users have found these visual guides extremely helpful for the dashboard disassembly process.
4.2. Disassembly and Module Integration
- Usuń wykończenie deski rozdzielczej: Carefully use trim removal tools to pry open and remove the necessary dashboard trim pieces surrounding your RNS850 unit. Work slowly to avoid damaging clips or surfaces.
- Access RNS850 Unit: Unscrew and gently pull out the RNS850 head unit from its housing.
- Podłącz kabel zasilający: Connect the provided power cable harness between the vehicle's original wiring and the RNS850 unit. The module's power input will connect to this harness.
- Podłącz kable LVDS: Disconnect the original LVDS cable from the RNS850 unit. Connect one of the provided LVDS cables from the RNS850 to the module's "LVDS IN" port. Connect the other provided LVDS cable from the module's "LVDS OUT" port back to the RNS850 unit.
- Podłącz kabel USB: Route the USB cable to a convenient location (e.g., glove box or center console) for future use with wired CarPlay/Android Auto or USB media. Connect it to the module's "USB" port.
- Podłącz antenę WiFi: Attach the WiFi antenna to the designated port on the module. Position it for optimal signal reception.
- AUX Activation (if needed): If your vehicle does not have an active AUX input, use the provided OBD activation cable to activate it. Follow the instructions specific to the OBD cable for this process.
- Bezpieczny moduł: Find a suitable, secure location behind the dashboard to place the module, ensuring it does not interfere with any moving parts or existing wiring.
- Połączenia testowe: Before fully reassembling, reconnect the car battery and briefly test the system to ensure the module powers on and the display functions correctly.
- Ponowne złożenie pulpitu nawigacyjnego: Once confirmed working, carefully reassemble all dashboard trim pieces and secure the RNS850 unit.

Image: Before and after installation comparison, demonstrating the visual upgrade to the infotainment system.

Image: The module highlighting its core functionalities.
5. Instrukcja obsługi
Once installed, the module allows seamless integration of smartphone features into your vehicle's display.
5.1. Przełączanie między systemami
To switch between your vehicle's original RNS850 system and the CarPlay/Android Auto interface, typically press and hold a specific button on your car's controls (e.g., the "NAV" or "MEDIA" button, or a dedicated "MODE" button, depending on your vehicle's configuration). The module is designed to retain all OEM features, allowing you to seamlessly switch back to the original car system when needed.
5.2. Bezprzewodowe połączenie CarPlay / Android Auto
- Upewnij się, że w smartfonie są włączone Bluetooth i Wi-Fi.
- On the module's interface (displayed on your car screen), navigate to the CarPlay or Android Auto option.
- Pair your phone via Bluetooth with the module (the module's Bluetooth name will appear on your phone).
- Once paired, the system will prompt you to enable CarPlay or Android Auto via Wi-Fi. Accept the prompt.
- Your phone should automatically connect wirelessly to the module each time you start the car, typically within 5-10 seconds.

Image: Demonstrates the Wireless CarPlay and Android Auto interfaces in operation, showcasing navigation, music playback, and phone call screens.
5.3. Voice Assistant (Siri / Google Assistant)
Access your smartphone's voice assistant (Siri for CarPlay, Google Assistant for Android Auto) by pressing the voice command button on your steering wheel or by saying the wake-up phrase ("Hey Siri" or "Hey Google"). This allows for hands-free control of navigation, music, calls, and more.

Image: Illustrates the use of voice assistants for navigation and other commands within the CarPlay/Android Auto environment.
5.4. Mirror Projection (MirrorLink)
The module supports screen mirroring for both iPhone (AirPlay) and Android (Autolink) devices. This feature allows you to display your phone's screen directly onto the car's infotainment display, enabling access to apps like Netflix, YouTube, and other content not natively supported by CarPlay/Android Auto.

Image: Demonstrates the MirrorLink functionality, showing a smartphone screen mirrored onto the car's display for video playback.
5.5. Retained OEM Features
The module is designed to preserve all original vehicle functionalities. This includes:
- OEM reverse camera and parking radar support.
- Compatibility with aftermarket reverse cameras and 360-degree camera systems.
- Przód view camera DVR (CVBS) support.
- Retention of original car knob, steering wheel buttons, and hand-touch controls for seamless operation.
6. Konserwacja
The Wireless CarPlay/Android Auto module requires minimal maintenance. Follow these guidelines to ensure its longevity:
- Keep the module and its connections free from dust and moisture.
- Unikaj wystawiania modułu na działanie ekstremalnych temperatur.
- Nie próbuj otwierać modułu casing, gdyż spowoduje to unieważnienie gwarancji.
- Aby zapobiec sporadycznym problemom, należy upewnić się, że wszystkie kable są solidnie podłączone.
7. Rozwiązywanie Problemów
If you encounter issues with your module, please refer to the following common troubleshooting steps:
| Problem | Możliwa przyczyna / rozwiązanie |
|---|---|
| No display after installation. |
|
| Brak dźwięku lub dźwięk zniekształcony. |
|
| Brak połączenia bezprzewodowego CarPlay/Android Auto. |
|
| OEM features (e.g., reverse camera) not working. |
|
Jeśli wykonanie tych czynności nie rozwiąże problemu, skontaktuj się z działem obsługi klienta, aby uzyskać dalszą pomoc.
8. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Nazwa produktu | Wireless Carplay/Android Car Modification Module |
| Marka | autoabc |
| Zgodne pojazdy | Volkswagen Touareg RNS 850 (2011-2015, 8-inch screens only) |
| Technologia łączności | Bluetooth, Wi-Fi, USB |
| Typ kontrolera | Android (via Android Auto), iOS (via CarPlay) |
| Cechy specjalne | Built-In Bluetooth, MirrorLink (AirPlay/Autolink), OEM Feature Retention |
| Tryb wyjścia audio | Stereo, Surround (5.1 or 7.1) |
| Obsługa kodowania wideo | H.264, H.265/HEVC |
| Wymiary opakowania | 9.96 x 7.99 x 2.8 cala |
| Waga przedmiotu | 2.29 funta |
9. Gwarancja i wsparcie
Ten produkt jest dostarczany z One-Year Global Warranty, covering manufacturing defects and malfunctions under normal use.
Zapewniamy również LIFETIME Technical Service Support. For any questions, installation assistance, or troubleshooting, please contact us via Amazon Email. Our team is committed to providing reliable online technical support to ensure your satisfaction.
For the quickest resolution, please provide your order number and a detailed description of the issue when contacting support.
10. Oficjalne filmy o produktach
No official product videos from the seller were found in the provided product information. For installation guidance, please refer to community-created video tutorials available on platforms like YouTube, as mentioned in the installation section.





