BESTTEN Keyed Alike Exterior Door Knob and Single Cylinder Deadbolt Combo Set (2-Pack, Matte Black)

Wstęp

This manual provides detailed instructions for the installation, operation, and maintenance of your BESTTEN Keyed Alike Exterior Door Knob and Single Cylinder Deadbolt Combo Set. Please read these instructions carefully before installation and use to ensure proper function and safety.

Zawartość opakowania

Przed rozpoczęciem instalacji sprawdź, czy wszystkie komponenty są obecne:

• Exterior Door Knobs (2)
• Single Cylinder Deadbolts (2)
• Latches (2)
• Strike Plates (2)
• Reinforcement Plates (2)
• Śruby maszynowe
• Wkręty do drewna
• Keys (6, keyed alike)
• Szablon instalacji

Rysunek 1: Full Set of Accessories for the BESTTEN Door Lock Combo Set.

Wymiary produktu

Ensure your door dimensions are compatible with the lock set. Key dimensions are:

• Lock body outside diameter: 2.54 inches (64.6mm)
• Adjustable latch for 2-3/8 inches - 2-3/4 inches (60-70mm) backset
• Fits door thickness from 1-3/8 inches to 1-3/4 inches (35-45mm)

Rysunek 2: Product Dimensions for Deadbolt and Door Knob Components.

Instalacja

Important Note: The machine screws come preinstalled in the handle. Please remove them before installation.

Rysunek 3: Removing Pre-installed Screws.

General Installation Video

Deadbolt Lock Installation

1. Select Proper Backset: Adjust the latch to either 2-3/8" (60mm) or 2-3/4" (70mm) as required for your door.
2. Zainstaluj zatrzask: Insert the latch into the door edge, ensuring the bolt is retracted. Secure with two (S1) latch screws.
3. Install Outside Cylinder Housing: Insert the outside cylinder housing. Ensure the torque blade is inserted vertically into the cross-shaped crank of the deadbolt latch for proper timing. The keyhole must be oriented as shown in the diagram.
4. Test Inside Knob: Turn the thumb-turn knob to lock (horizontal to vertical, should click) and unlock (vertical to horizontal, no sound).
5. Install Thumbturn Assembly: Keep the thumbturn knob in the vertical position for easy screw installation.
6. Test końcowy: Always test the proper function of the deadbolt before closing the door.

Door Knob Installation

1. Select Proper Backset: Adjust the latch to either 2-3/8" (60mm) or 2-3/4" (70mm) as required for your door.
2. Remove Pre-installed Screws: As noted above, remove the machine screws from the handle before proceeding.
3. Zainstaluj zatrzask: Insert the latch into the door edge, ensuring the bolt is retracted. Secure with two (S1) latch screws.
4. Wskazówki dotyczące instalacji: During installation, make sure that the lock tailpiece and the thumb-turn knob are in the same position, either vertical or horizontal. Insert the lock tailpiece into the slot behind the thumb-turn knob. Refer to the diagram for correct orientation.

Rysunek 4: Door Knob Installation Tips for Tailpiece Orientation.
5. Test Outside Knob: Turn the outside knob to test operation. Rotate the lock tailpiece from vertical to horizontal; you should hear a click.
6. Install Inside Knob: Insert the two (S2) machine screws that were removed earlier through the holes in the door rosette and tighten.
7. Test końcowy: Always test the proper function of the door knob and latch before closing the door.

Działanie

Your BESTTEN lock set features keyed-alike convenience, meaning all locks in the set operate with the same key. This set is designed for residential exterior or interior doors where keyed entry or security is needed.

• Zamykanie od zewnątrz: Insert the key into the deadbolt or door knob cylinder and turn to engage the lock.
• Odblokowanie z zewnątrz: Insert the key into the deadbolt or door knob cylinder and turn to disengage the lock.
• Locking Deadbolt from Interior: Turn the thumb-turn knob on the interior side of the deadbolt to the horizontal position.
• Unlocking Deadbolt from Interior: Turn the thumb-turn knob on the interior side of the deadbolt to the vertical position.
• Operating Door Knob from Interior: The interior door knob can be turned to open the door at any time.

Rysunek 5: Keyed Alike Convenience for Exterior and Interior Doors.

Konserwacja

To ensure the longevity and smooth operation of your lock set, follow these maintenance tips:

• Czyszczenie: Regularnie czyść zamek miękką ściereczką.amp cloth. Avoid abrasive cleaners or solvents that could damage the matte black finish.
• Smarowanie: Apply a small amount of graphite lubricant or a silicone-based lubricant to the keyway and latch mechanism annually, or if operation becomes stiff. Do not use oil-based lubricants as they can attract dirt.
• Śruby dokręcające: Periodically check and tighten all mounting screws to ensure the lock set remains securely fastened to the door.

Rozwiązywanie problemów

Specyfikacje

• Marka: NAJLEPSZE
• Numer modelu: DK1-ET-BK-2PK
• Tworzywo: Metal
• Rodzaj wykończenia: Powder Coated (Matte Black)
• Typ zamka: Combination Lock (Keyed Entry Door Knob & Single Cylinder Deadbolt)
• Niepowodzenie: Adjustable 2-3/8" (60mm) or 2-3/4" (70mm)
• Grubość drzwi: 1-3/8" (35 mm) do 1-3/4" (45 mm)
• Wpust: KW1
• Klawiatura: 6 keys, keyed alike
• Waga przedmiotu: 3.65 funta
• Wymiary opakowania: 7.36 x 6.81 x 6.46 cala

Gwarancja i wsparcie

For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official BESTTEN webstrona. Zachowaj dowód zakupu na potrzeby roszczeń gwarancyjnych.