Wstęp
The Pixio PS2S Titan Black Ultrawide Mega Heavy-Duty Premium Single Monitor Arm Stand is designed to securely hold ultrawide monitors up to 57 inches and support up to 59.4 lbs. This monitor arm provides flexible viewing angles with height, tilt, and swivel adjustments, along with integrated cable management to maintain an organized workspace.
Informacje dotyczące bezpieczeństwa
- Ensure the desk surface is sturdy enough to support the combined weight of the monitor arm and your monitor.
- Do not exceed the maximum weight capacity of 59.4 lbs (for flat monitors) or 48.4 lbs (for curved monitors).
- Always follow installation instructions carefully to prevent injury or damage to equipment.
- Trzymaj małe części poza zasięgiem dzieci.
- Adjust tension settings only when the monitor is attached to prevent the arm from springing up unexpectedly.
Zawartość opakowania
Przed rozpoczęciem instalacji sprawdź, czy wszystkie komponenty są obecne:
- Zespół ramienia monitora
- Biurko Clamp (C-klamp)
- Sprzęt montażowy do przelotek
- VESA Plate (75x75mm, 100x100mm)
- VESA Adapters (100x200mm, 200x100mm, 200x200mm)
- Mounting Screws (various sizes)
- Allen Keys for adjustments
- Klipsy do zarządzania kablami
Konfiguracja i instalacja
The Pixio PS2S Titan monitor arm offers two installation methods: C-clamp and Grommet mount. Choose the method best suited for your desk.
1. Choose Mounting Method
The monitor arm can be mounted using either a C-clamp for desk edges or a grommet mount for desks with a pre-drilled hole.
Image: Easy Installation options showing top-mounted clamp and grommet mount. The clamp supports desk thickness from 0.39" to 1.8" (10-45mm), and the grommet supports desk thickness from 0.39" to 1.6" (10-40mm).
Both methods allow for installation entirely from above the desk surface, ensuring a clean workspace.
2. Attach VESA Plate to Monitor
Attach the quick-release VESA plate to the back of your monitor using the appropriate screws. The VESA plate supports 75x75mm and 100x100mm patterns. For larger VESA patterns like 100x200mm, 200x100mm, or 200x200mm, use the included VESA adapters.
Image: Quick Release VESA Plate. This plate is compatible with VESA patterns 75x75mm, 100x100mm, and with included adapters, 100x200mm, 200x100mm, and 200x200mm.
3. Mount the Arm to the Desk
Secure the monitor arm base to your desk using either the C-clamp or grommet mount. Ensure the mount is tightened securely to prevent movement.
4. Attach Monitor to Arm
Slide the monitor (with the attached VESA plate) onto the arm's VESA head until it clicks securely into place. Ensure it is fully seated and locked.
Obsługa i regulacje
The Pixio PS2S Titan monitor arm allows for various adjustments to achieve optimal viewkomfort.
Regulacja napięcia
The arm features a spring-loaded mechanism for precise weight adjustments. Use the provided Allen key to adjust the tension. Turn clockwise for lighter monitors to increase tension, and counter-clockwise for heavier monitors to reduce tension. Adjust until the monitor holds its position freely.
Image: Close-up of the adjustment screw on the monitor arm, indicating where to insert the Allen key for precise weight adjustments.
Image: Diagram illustrating how to increase tension (turn clockwise for lighter monitors) or reduce tension (turn counter-clockwise for heavier monitors) using an Allen key.
Korekty pozycyjne
The arm allows for extensive movement to find your ideal viewpozycja:
- Przechylenie: Adjust the monitor angle from +60° to -20°.
- Obrót: Rotate the monitor ±90° (portrait to landscape).
- Obracać: Swivel the arm at various joints up to ±180° and the VESA head ±90°.
- Regulacja wysokości: The arm provides a height range from 12.8" to 25.79" (325-655mm).
- Wyprost ramienia: The arm can extend up to 20.7" (526mm) from the mounting point.
Image: Diagram illustrating the range of motion for the monitor arm, including ±90° rotation, ±180° swivel at two joints, and tilt from +60° to -20°.
Zarządzanie kablami
Utilize the integrated cable clips along the arm to route and conceal your monitor cables, keeping your workspace tidy.
Image: Close-up of the monitor arm showing integrated clips for cable management, designed to keep cords organized and out of sight.
Produkt ponadview Wideo
Video: Official Pixio PS2S Titan Ultra-Heavy-Duty Single Monitor Arm overview. This video demonstrates the arm's features, including its heavy-duty construction, VESA compatibility, quick-release plate, adjustability (tilt, swivel, rotation), cable management, and easy installation methods.
Konserwacja
- Regularnie sprawdzaj wszystkie śruby i połączenia, aby mieć pewność, że są dobrze dokręcone.
- Clean the arm with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Do not lubricate the gas spring mechanism.
- If the arm becomes difficult to adjust, re-check the tension settings according to your monitor's weight.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Monitor arm sags or won't stay up. | Tension is too low for the monitor's weight. | Increase the gas spring tension using the provided Allen key (turn clockwise). |
| Monitor arm is too stiff or won't move down. | Tension is too high for the monitor's weight. | Decrease the gas spring tension using the provided Allen key (turn counter-clockwise). |
| Monitor chwieje się lub jest niestabilny. | Montaż clamp/grommet is not tight enough, or VESA plate is not securely attached. | Upewnij się, że biurko jestamp/grommet is fully tightened. Verify the VESA plate is properly seated and locked onto the arm. |
| Cables are not neatly managed. | Cables are not routed through the integrated clips. | Route all cables through the designated cable management clips on the arm. |
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Model | PS2S Titan |
| Zgodność rozmiaru monitora | 17" to 57" Ultrawide Monitors |
| Nośność | Flat Monitors: 4.4 lbs - 59.4 lbs Curved Monitors: 4.4 lbs - 48.4 lbs |
| Zgodność ze standardem VESA | 75x75mm, 100x100mm, 100x200mm, 200x100mm, 200x200mm |
| Zakres wysokości | 12.8" do 25.79" (325-655 mm) |
| Maksymalne wydłużenie ramienia | 20.7" (526 mm) |
| Kąt nachylenia | +60° ~ -20° |
| Kąt obrotu | ±90° |
| Kąt obrotu | ±90° (at VESA head), ±180° (at arm joints) |
| Opcje montażu | C-Clamp (Desk Thickness: 10-45mm), Grommet (Desk Thickness: 10-40mm) |
| Tworzywo | Metal |
| Kolor | Czarny |
Image: Detailed diagram illustrating the height range (12.8" to 25.79") and maximum arm extension (20.7") of the monitor arm.
Image: Diagram indicating the monitor arm fits screens from 17" to 57" and supports weights up to 48.4 lbs (curved) or 59.4 lbs (flat).
Gwarancja i wsparcie
For warranty information, technical support, or service inquiries, please visit the official Pixio webOdwiedź witrynę lub skontaktuj się z działem obsługi klienta. Szczegółowe warunki gwarancji znajdziesz w dokumentacji zakupu.
Możesz również odwiedzić Sklep Pixio na Amazonie Aby uzyskać dodatkowe informacje o produkcie i zasoby pomocy technicznej.
