Instrukcja obsługi pedału Fender Bassman Delay Model 0234612000

1. Koniec produktuview

The Fender Bassman Delay Pedal is an effects unit designed for bass instruments, drawing inspiration from Fender's Bassman amplifier line. It features meticulously crafted analog and digital circuits for bass-centric tonal expansion. The pedal offers two professional DSP algorithms specifically engineered to repeat bass signals, allowing users to select between smooth analog repeats or crisp digital delay tones. Controls for time and feedback determine the delay duration and number of repeats. A 'low' switch allows shaping the low-frequency presence in delay repeats, enabling users to either keep the low end clear by fading repeats lightly or duplicate the full signal for more pronounced effects.

• Bass-tuned analog and digital delay DSP algorithms with analog dry-through.
• Low switch for sculpting low frequency presence in delay repeats.
• Internal high cut and low cut controls for fine-tuning delay repeat frequency content.
• Soft-touch switchable true or buffered bypass with trails.
• Side-mounted pad switch for compatibility with active basses.

Obraz 1.1: Przód view of the Fender Bassman Delay Pedal. This image displays the pedal's control layout, including the Time, Feedback, and Level knobs, along with the Type and Low toggle switches, and the footswitch.

2. Konfiguracja

Follow these steps to properly set up your Bassman Delay Pedal:

1. Podłączenie zasilania: Connect a 9-volt DC power supply (not included) to the "9V DC IN" jack located on the top of the pedal. Ensure the power supply is center-negative.
2. Połączenie wejściowe: Connect your bass guitar or other instrument to the "IN" jack using a standard 1/4-inch instrument cable.
3. Połączenie wyjściowe: Podłącz gniazdo „OUT” do amplifier lub kolejny pedał w torze sygnałowym przy użyciu standardowego kabla instrumentalnego 1/4-calowego.
4. Przełącznik podkładki: If you are using an active bass with a high output, engage the side-mounted pad switch to prevent signal clipping and ensure optimal performance. This switch is located on the side of the pedal.

Obraz 2.1: Szczyt view of the Fender Bassman Delay Pedal, showing the "IN" and "OUT" 1/4-inch audio jacks and the "9V DC IN" power input.

3. Działanie

The Bassman Delay Pedal features intuitive controls for shaping your delay effects:

• Pokrętło TIME: Adjusts the delay time, controlling the interval between repeats.
• Pokrętło FEEDBACK: Controls the number of delay repeats. Higher settings result in more repeats.
• Pokrętło POZIOM: Sets the volume of the delay repeats relative to your dry signal.
• TYP Przełącznik: Toggles between two distinct delay algorithms:
  • Analog: Provides warm, smooth, and decaying repeats characteristic of vintage analog delay units.
  • Cyfrowy: Offers crisp, clear, and precise repeats.
• LOW Switch: Modifies the low-frequency content of the delay repeats.
  • Pozycja górna: Reduces low frequencies in the repeats, keeping the bass signal clear and preventing muddiness.
  • Pozycja dolna: Allows the full frequency range of the signal to be repeated, suitable for beat-repeat effects or when a fuller delay sound is desired.
• Przełącznik nożny: Engages or bypasses the delay effect. This pedal features a soft-touch switchable true or buffered bypass with trails, meaning repeats can naturally decay even after the effect is disengaged if trails mode is active (internal setting).

Obraz 3.1: Kątowy view of the Fender Bassman Delay Pedal, highlighting the control knobs and toggle switches for Time, Feedback, Level, Type, and Low.

Internal Controls (High Cut and Low Cut)

The Bassman Delay Pedal includes internal high cut and low cut controls. These are trim pots located inside the pedal enclosure and are intended for advanced users to fine-tune the frequency content of the delay repeats beyond what the external LOW switch offers. Accessing these controls requires opening the pedal, which should be done with care to avoid damaging components.

4. Konserwacja

To ensure the longevity and optimal performance of your Bassman Delay Pedal:

• Czyszczenie: Do czyszczenia zewnętrznej części pedału używaj miękkiej, suchej ściereczki. Unikaj środków czyszczących o właściwościach ściernych i rozpuszczalników.
• Składowanie: Przechowuj pedał w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.
• Znajomości: Okresowo sprawdzaj wszystkie połączenia kablowe pod kątem zużycia i uszkodzeń. Wymień uszkodzone kable, aby zapobiec utracie sygnału lub szumom.
• Zasilanie: Always use a compatible 9V DC center-negative power supply. Incorrect power can damage the unit.

5. Rozwiązywanie Problemów

If you encounter issues with your Bassman Delay Pedal, consider the following:

• Brak dźwięku:
  • Sprawdź, czy wszystkie kable (wejściowe, wyjściowe, zasilające) są solidnie podłączone.
  • Verify the power supply is functioning and correctly connected (9V DC, center-negative).
  • Sprawdź, czy Twój instrument i amplifiery działają poprawnie.
  • Ensure the pedal's footswitch is engaged.
• Słaby lub zniekształcony dźwięk:
  • Check the LEVEL knob setting; it might be too low or too high.
  • If using an active bass, ensure the side-mounted pad switch is engaged.
  • Sprawdź kable pod kątem uszkodzeń.
• Delay Not Apparent:
  • Check the TIME and FEEDBACK knob settings; they might be set too low.
  • Sprawdź, czy pedał jest wciśnięty.
• Nadmierny hałas:
  • Upewnij się, że używasz regulowanego zasilacza.
  • Sprawdź, czy w Twojej konfiguracji nie ma pętli uziemienia.
  • Try isolating the pedal from other electronics.

If problems persist, consult the Fender support resources.

6. Specyfikacje

7. Gwarancja i wsparcie

This Fender product is covered by a manufacturer's warranty. For detailed warranty information, product registration, or technical support, please refer to the official Fender website or contact Fender customer service directly. Keep your purchase receipt as proof of purchase.

Aby uzyskać dalszą pomoc, odwiedź stronę Fender Support Page.