1. Koniec produktuview
The Aoleaby JK Smart BMS B2A8S20P is an advanced Battery Management System designed for 4S to 8S Li-ion and LiFePO4 battery packs. It features a 2A active balance current, integrated Bluetooth (BT) communication, RS485, and an optional heating function. This BMS provides comprehensive protection against over-charge, over-discharge, over-current, short circuit, and low-temperature charging cutoff, ensuring the longevity and safety of your battery system.
Główne cechy obejmują:
- JK Own Development APP: Monitor battery status and adjust settings via a dedicated mobile application with Bluetooth connectivity.
- JK Active Balance: Actively balances cell voltages up to 2A, improving battery efficiency and extending lifespan.
- Pełna funkcjonalność: Robust protection mechanisms for safe battery operation.
- Szeroka kompatybilność: Support for 12V/4S to 24V/8S LiFePO4 battery systems with continuous currents up to 200A and peak currents up to 350A.
Rycina 1: Przód view of the JK Smart BMS B2A8S20P, highlighting its functions including Bluetooth/RS485/Heat, 2A balance current, 4S-8S battery string compatibility, 200A charge/discharge, and Li-ion/LiFePO4 battery type support.
2. Zawartość opakowania
Po otwarciu opakowania należy sprawdzić, czy znajdują się w nim wszystkie elementy:
- JK Smart BMS unit (B2A8S20P) with built-in Bluetooth.
- P- and B- 7AWG cables (13cm*2).
- Temperature sensor (40cm).
- Balance wires (75cm).
- Active switch (15cm).
- Heating cable (Only for BMS models with heating function).
Figure 2: The JK Smart BMS B2A8S20P unit shown with its accompanying accessories: NTC temperature sensor, active switch, and balance cables.
3. Konfiguracja i instalacja
3.1 Środki ostrożności
- Always disconnect the battery pack from any load or charger before installation.
- Należy nosić odpowiedni sprzęt ochrony osobistej (PPE), w tym okulary ochronne i rękawice termoizolacyjne.
- Ensure all connections are secure and correctly polarized to prevent damage to the BMS or battery.
- Refer to the wiring diagram specific to your battery configuration (4S, 5S, 6S, 7S, or 8S).
3.2 instrukcje okablowania
- Connect B- Cable: Connect the thick black B- cable from the BMS to the negative terminal of your battery pack.
- Connect P- Cable: Connect the thick black P- cable from the BMS to the negative terminal of your load/charger.
- Podłącz przewody równoważące: Carefully connect the balance wires to each cell of your battery pack, starting from B0 (negative terminal of the first cell) up to B8 (positive terminal of the last cell for an 8S pack). Ensure the correct order and polarity. Incorrect balance wire connection can damage the BMS.
- Podłącz czujnik temperatury: Attach the temperature sensor to a central cell or a location that accurately reflects the battery pack's temperature.
- Connect Active Switch: Connect the active switch to the designated port on the BMS. This switch is used to activate/deactivate the BMS.
- Heating Cable (Jeśli dotyczy): For BMS models with a heating function, connect the green 5PIN cable of the heating cable to the heating pad. The remaining black and red cables should be linked to a smart charger. The smart charger will detect the battery temperature via the BMS and control the heating pad.
Note: Always double-check all connections before applying power.
4. Operating the Smart BMS
4.1 Początkowe włączenie zasilania
After completing all wiring, activate the BMS using the active switch. The BMS should power on, and you may observe initial balancing activity.
4.2 Bluetooth App Connection
- Download the official JK BMS application from your smartphone's app store (iOS/Android).
- Włącz Bluetooth w swoim smartfonie.
- Open the JK BMS app and search for available devices. Select your BMS from the list.
- Once connected, the app will display real-time battery parameters such as cell voltages, całkowita objtage, prąd, temperatura i stan naładowania.
4.3 Funkcja aktywnego równoważenia
The JK Smart BMS features an active balancing function that automatically equalizes the voltage differences between battery cells. This process is crucial for maximizing battery capacity and extending its lifespan. The 2A active balance current ensures efficient and rapid cell equalization.
Figure 3: Illustration emphasizing the 2A maximum active balance current, which operates continuously to maintain cell voltagrównowaga.
4.4 Funkcje zabezpieczające
The BMS continuously monitors the battery pack and activates protection mechanisms when parameters exceed safe limits. These include:
- Ochrona przed przeładowaniem
- Zabezpieczenie przed nadmiernym rozładowaniem
- Zabezpieczenie nadprądowe
- Zabezpieczenie przed zwarciem
- Low-temperature charging cutoff
When a protection event occurs, the BMS will disconnect the battery from the load or charger. Refer to the app for detailed fault information.
5. Konserwacja
To ensure optimal performance and longevity of your JK Smart BMS and battery pack:
- Regularne monitorowanie: Periodically check battery parameters via the mobile app to ensure all cells are balanced and operating within safe limits.
- Kontrola połączenia: Annually inspect all wiring connections for corrosion, looseness, or damage. Tighten any loose connections.
- Czystość: Keep the BMS unit clean and free from dust and debris. Ensure proper ventilation if enclosed.
- Aktualizacje oprogramowania układowego: Sprawdź producenta website or app for any available firmware updates for the BMS.
6. Rozwiązywanie Problemów
If you encounter issues with your JK Smart BMS, consider the following:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| BMS nie włącza się | Active switch off, incorrect wiring, damaged BMS. | Ensure active switch is on. Verify all wiring connections, especially B- and balance wires. Contact support if BMS is damaged. |
| Cells out of balance | Initial setup, prolonged disuse, faulty cell. | Allow BMS to balance over time. Check balance wire connections. If a cell is consistently low, it may be faulty and require replacement. |
| Over-charge/discharge protection triggered | Charger/load voltage too high/low, BMS settings. | Verify charger/load settings. Check BMS settings via app. Allow battery to rest and recover. |
| Problemy z połączeniem Bluetooth | Bluetooth off, app issues, distance. | Ensure phone Bluetooth is on. Restart app and BMS. Reduce distance between phone and BMS. |
For persistent issues, refer to the detailed technical specifications or contact customer support.
7. Specyfikacje
The following table provides detailed technical specifications for the JK Smart BMS B2A8S20P and related models.
Figure 4: Comprehensive technical specification table for various JK Smart BMS models, including the B2A8S20P, detailing parameters such as battery strings, balance current, continuous current, peak current, and protection features.
General Specifications (B2A8S20P):
- Supported Battery Strings: 4S-8S
- Typ baterii: Li-ion/LiFePO4
- Metoda równowagi: Aktywne saldo
- Bilans prądu: 2A
- Ciągły prąd rozładowania: 200A
- Szczytowy prąd rozładowania: 350A
- Komunikacja: Bluetooth (BT), RS485, CANbus (optional)
- Wymiary: Około 1.18 x 0.79 x 0.39 cala (wymiary opakowania)
- Waga przedmiotu: 2.2 funta (1000 gramów)
8. Gwarancja i wsparcie
8.1 Informacje o gwarancji
Specific warranty details for the Aoleaby JK Smart BMS B2A8S20P are not provided in this manual. Please refer to the product packaging, the seller's website, or contact the retailer directly for warranty terms and conditions.
8.2 Obsługa klienta
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your product, please contact Aoleaby customer support or the authorized reseller from whom you purchased the product. Provide your product model number (B2A8S20P) and purchase details for efficient service.
