1. Wprowadzenie
This manual provides essential information for the safe and efficient operation of your BITMAIN Antminer S19 XP ASIC Miner. Please read these instructions carefully before installation and use to ensure optimal performance and longevity of the device.
2. Informacje dotyczące bezpieczeństwa
WARNING: This device operates at high voltage and consumes significant power. Improper installation or use can result in electric shock, fire, or damage to the equipment. Always follow safety guidelines.
- Zasilanie: The Antminer S19 XP requires a 220-240V AC input voltage. Użycie nieprawidłowej objętościtage may cause severe damage to the miner.
- Przewód zasilający: The power cord is NOT INCLUDED in the original package. Ensure you use a compatible power cord rated for the required voltagi aktualne.
- Wentylacja: Ensure adequate airflow around the miner to prevent overheating. Do not obstruct the air inlets or outlets.
- Środowisko: Operate the miner within specified environmental conditions (temperature, humidity) to maintain performance and prevent damage.
- Bezpieczeństwo elektryczne: Do not open the miner casing while it is powered on. Disconnect power before performing any maintenance or inspection.
3. Zawartość opakowania
Upon receiving your BITMAIN Antminer S19 XP, please verify that the following items are included:
- BITMAIN Antminer S19 XP ASIC Miner Unit
- Instrukcja obsługi produktu (ten dokument)
Note: The power cord is not included and must be sourced separately.
4. Koniec produktuview
The BITMAIN Antminer S19 XP is a high-performance ASIC (Application-Specific Integrated Circuit) miner designed for SHA256 algorithm-based cryptocurrencies such as Bitcoin (BTC), Bitcoin Cash (BCH), and Bitcoin SV (BSV). It features an air-cooling system for efficient heat dissipation.
Obraz 1: Przód view of the BITMAIN Antminer S19 XP ASIC Miner.
Obraz 2: Pod kątem view of the Antminer S19 XP, highlighting the 220V AC power requirement.
Obraz 3: Tył view of the Antminer S19 XP, displaying the cooling fans and power input ports.
5. Instrukcje konfiguracji
Follow these steps to set up your Antminer S19 XP:
- Umieszczenie: Choose a location with good ventilation and stable temperature. Ensure the miner is placed on a flat, stable surface.
- Podłączenie zasilania: Connect the appropriate 220-240V AC power cord (not included) to the miner's power input ports. Ensure all connections are secure.
- Połączenie internetowe: Connect an Ethernet cable (10/100M) from your network router or switch to the Ethernet port on the miner.
- Włączanie: Once all connections are secure, power on the miner. The device will initiate its startup sequence.
- Konfiguracja wstępna: Uzyskaj dostęp do górnika web interfejs przez a web browser on a computer connected to the same network. Refer to the miner's network settings or use an IP scanner to find its IP address. Log in using default credentials (usually provided by BITMAIN or found in their general documentation) and configure your mining pool settings.
6. Instrukcja obsługi
After successful setup and configuration, your Antminer S19 XP will begin mining. You can monitor its performance through the web interfejs.
- Monitoring Hashrate: Ten web interface displays the current hashrate (e.g., 151 TH/S), which indicates the processing power dedicated to mining.
- Efektywność energetyczna: The miner operates at an efficiency of approximately 21.5 J/TH, indicating its energy consumption per unit of hashing power.
- Monitorowanie temperatury: Regularly check the operating temperature of the miner to ensure it remains within safe limits (32~113°F or 0~45°C).
- Supported Algorithms: The S19 XP is designed for the SHA256 algorithm, supporting cryptocurrencies like BTC, BCH, and BSV.
7. Konserwacja
Regular maintenance is crucial for the longevity and stable operation of your Antminer S19 XP.
- Usuwanie kurzu: Periodically clean dust from the fans and heatsinks to ensure efficient cooling. Use compressed air or a soft brush.
- Kontrola środowiska: Maintain the operating environment within the recommended temperature (32~113°F) and humidity (10~90% non-condensing) ranges.
- Aktualizacje oprogramowania układowego: Sprawdź oficjalny kod BITMAIN website for any available firmware updates. Apply updates as recommended to improve performance, stability, or security.
- Sprawdzenie zasilania: Ensure the power supply unit and cables are free from damage and securely connected.
8. Rozwiązywanie Problemów
If you encounter issues with your Antminer S19 XP, consider the following common troubleshooting steps:
- Górnik się nie włącza: Verify the power cord is correctly connected and the power outlet is functional. Ensure the input voltage wynosi 220–240 V prądu przemiennego.
- Brak połączenia sieciowego: Check the Ethernet cable connection. Ensure your router is working and the miner's IP address is correctly configured.
- Niski współczynnik hashowania: This could be due to high operating temperatures, network issues, or incorrect mining pool configuration. Check the miner's status in the web interfejs.
- Przegrzanie: Ensure proper ventilation. Clean any dust buildup on fans and heatsinks. Verify ambient temperature is within specifications.
- Nieodpowiadający Web Interfejs: Try restarting the miner. If the issue persists, you may need to reset the miner to factory settings (refer to BITMAIN's official documentation for specific procedures).
9. Specyfikacje
| Funkcja | Specyfikacja |
|---|---|
| Model | S19 XP |
| Algorytm | Kryptowaluta | SHA256 | BTC/BCH/BSV |
| Hashrate | 151 TH/S ± 3% |
| Zasilanie ścienne w temperaturze 77°F (25°C) | 3247W ± 5% |
| Wydajność energetyczna na ścianie w temperaturze 25°C (77°F) | 21.5 J/TH ± 5% |
| Zasilanie AC Wejście voltage | 200~240 V |
| Zakres częstotliwości wejściowej prądu przemiennego zasilania | 47~63 Hz |
| Zasilanie AC Prąd wejściowy | 20 Amp |
| Tryb połączenia sieciowego | Sieć Ethernet 10/100M |
| Rozmiar górnika (długość*szerokość*wysokość, bez opakowania) | 15.75 x 7.68 x 11.42 cala |
| Rozmiar górnika (długość*szerokość*wysokość, z opakowaniem) | 22.45 x 12.45 x 16.93 cala |
| Masa netto | 33.96 funtów |
| Masa brutto | 37.92 funtów |
| Temperatura pracy | 32~113°F (0~45°C) |
| Temperatura przechowywania | -4~158 °F (-20~70°C) |
| Wilgotność robocza (bez kondensacji) | 10~90% wilgotności względnej |
| Wysokość pracy | ≤2000 m |
10. Gwarancja i wsparcie
Informacje o gwarancji: Brand New BITMAIN Antminer units come with warranty coverage provided directly by BITMAIN. We are not responsible for the warranty; therefore, customers are required to proactively contact BITMAIN's official website, where dedicated personnel will assist you with any warranty claims or support needs.
Wsparcie techniczne: For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Antminer S19 XP, please refer to the official BITMAIN support channels and resources available on their webstrona.
11. Powiązane filmy
No official product videos directly related to the BITMAIN Antminer S19 XP were found in the provided media. Please refer to the manufacturer's official webwitryna zawierająca wszelkie dostępne materiały wideo.
