Keter Walnut 100 Gallon Resin Deck Box Instruction Manual

Wstęp

This manual provides detailed instructions for the assembly, operation, and maintenance of your Keter Walnut 100 Gallon Resin Deck Box. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Figure 1: Keter Walnut 100 Gallon Resin Deck Box

The Keter Walnut 100 Gallon Resin Deck Box is designed for outdoor storage, featuring a durable resin construction with a wood-look finish. It offers ample space for patio cushions, garden tools, and other outdoor essentials.

Informacje dotyczące bezpieczeństwa

• Przed użyciem upewnij się, że wszystkie części są dobrze zamocowane.
• Do not allow children to play inside the deck box to prevent entrapment.
• The deck box lid is rated to hold up to 660 lbs, allowing it to be used as a bench.
• Keep hands clear of the lid when closing to avoid pinching.
• Do not store hazardous materials or flammable liquids inside the deck box.

Zawartość opakowania

Before beginning assembly, verify that all components are present and undamaged. Refer to the assembly diagram for visual identification of parts.

• Panele boczne (2)
• Panel przedni (1)
• Panel tylny (1)
• Panel dolny (1)
• Pokrywka (1)
• Metal Reinforcement Channels (2)
• Gas Struts / Hydraulic Pistons (2)
• Hinge Brackets (2)
• Locking Clasps (2)
• Screws and Fasteners (various sizes)
• Instrukcja obsługi (ten dokument)

Konfiguracja i montaż

Assembly typically takes approximately 30 minutes. An electric screwdriver is recommended for ease of installation, especially for securing the sides to the bottom.

1. Przygotuj bazę: Lay the bottom panel flat on a clean, level surface.
2. Zamontuj panele boczne: Align the long side panels with the bottom panel and snap them into place. Ensure all connection points are securely engaged. The panels are designed to click together.
3. Zamontuj panele końcowe: Connect the shorter end panels to the assembled long sides and bottom. Press firmly until all sections click into position. This step significantly increases the box's stability.
4. Install Metal Reinforcement Channels: Slide the two metal channels into the designated grooves along the top edges of the long side panels. Ensure they are flush and secure.
5. Prepare the Lid: Place the lid upside down on a stable surface. Attach the gas struts/hydraulic pistons to the designated brackets on the underside of the lid using the provided screws.
6. Attach Lid to Box: Carefully align the lid with the top of the assembled box. Secure the gas struts to the side panels of the box using the remaining screws. Ensure the lid opens and closes smoothly.
7. Install Locking Clasps: Attach the metal locking clasps to the front of the lid and the corresponding section on the box. These allow for the use of a padlock (not included) for added security.

Figure 2: Product dimensions and 100 Gallon capacity.

This image illustrates the overall dimensions of the Keter 100 Gallon Resin Deck Box, highlighting its capacity and size for planning placement and storage needs.

Figure 3: Detailed interior dimensions and weight capacities.

This graphic provides specific interior dimensions (44.8"L x 20.8"W x 25.1"H), total weight capacity (660 lbs), and interior weight capacity (165 lbs), along with an estimated assembly time of 30 minutes.

Instrukcja obsługi

1. Otwieranie pokrywy: Gently lift the lid from the front. The hydraulic pistons will assist in opening and holding the lid in the open position, preventing it from slamming shut.
2. Zamykanie pokrywy: Gently pull the lid down. The soft-close mechanism of the hydraulic pistons will ensure a slow and controlled closure.
3. Zamykanie skrzynki: For added security, align the locking clasps on the front of the box and insert a padlock (not included).

Figure 4: Detail of the easy-lift and soft-close hydraulic piston mechanism.

This image highlights the hydraulic piston that facilitates smooth and safe opening and closing of the deck box lid, preventing sudden drops.

Figure 5: A person demonstrating the easy opening of the deck box lid.

This image shows a person effortlessly opening the Keter deck box, illustrating the convenience of its design for daily use.

Konserwacja

The Keter Walnut 100 Gallon Resin Deck Box is designed for minimal maintenance due to its durable DecoCoat technology and resin construction.

• Czyszczenie: Wytrzyj zewnętrzną powierzchnię za pomocą adamp cloth and mild soap as needed. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Odporność na warunki atmosferyczne: The box is UV-protected and water-resistant. Ensure the lid is properly closed to maintain internal dryness during inclement weather.
• Długowieczność: The DecoCoat finish is designed to prevent fading, splintering, rotting, or rusting, ensuring long-term aesthetic appeal and functionality.

Figure 6: Icons representing weather resistance, UV resistance, and water resistance.

This graphic highlights the deck box's ability to withstand various weather conditions, being UV-resistant and water-resistant to protect stored items.

Figure 7: Features of the superior resin material, including wood-look and feel, double-walled construction, all-weather resistance, and zero maintenance.

This image details the benefits of the advanced resin material used in the deck box, emphasizing its aesthetic appeal, robust construction, and minimal upkeep requirements.

Rozwiązywanie problemów

• Trudności w montażu: Ensure all panels are correctly oriented and aligned before applying pressure. Some connections may require firm pressure to snap into place. Refer to the assembly steps carefully.
• Pokrywa nie zamyka się prawidłowo: Check for any obstructions inside the box or along the edges of the lid. Verify that the hydraulic pistons and hinge brackets are correctly installed and not damaged.
• Woda w pudełku: Ensure the lid is fully closed and latched. Inspect the seal around the lid for any damage or gaps.

Specyfikacje

Gwarancja i wsparcie

For detailed warranty information and customer support, please refer to the official Keter website or the documentation included with your purchase. Keter offers dedicated customer service based in the US.