Globus elektryczny 65000083

Instrukcja obsługi kinkietu ściennego Globe Electric Clarissa 1-Light

Model: 65000083

Wstęp

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Globe Electric Clarissa 1-Light Wall Sconce. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Clarissa Wall Sconce features a matte brass finish with a white pleated fabric shade, designed to provide ambient lighting. It requires one E12/candelabra base 60W bulb (sold separately) and is compatible with LED and incandescent bulbs. The fixture is dimmable when used with a compatible dimmer switch (also sold separately).

Informacje dotyczące bezpieczeństwa

OSTRZEŻENIE: Ryzyko porażenia prądem. Przed instalacją lub serwisowaniem należy odłączyć zasilanie w skrzynce bezpieczników lub wyłączniku automatycznym.

  • Należy upewnić się, że wszystkie połączenia elektryczne są zgodne z lokalnymi przepisami i rozporządzeniami, a także z Krajowym Kodeksem Elektrycznym (NEC).
  • Jeśli nie masz doświadczenia w instalacjach elektrycznych, skonsultuj się z wykwalifikowanym elektrykiem.
  • Nie montować tego urządzenia w wilgotnych lub mokrych pomieszczeniach.amp lokalizacji. Ten produkt jest przeznaczony wyłącznie do użytku wewnątrz pomieszczeń.
  • Stosuj wyłącznie żarówki o podanym typie i mocy.tage (E12/Candelabra Base, max 60W). Exceeding the maximum wattagMoże to spowodować przegrzanie i uszkodzenie urządzenia.
  • Always allow the bulb to cool before replacing it.
  • Do not operate the fixture with a damaged cord or if it has been dropped or damaged in any way.
  • Trzymaj materiały łatwopalne z dala od oprawy oświetleniowej.

Zawartość opakowania

Przed rozpoczęciem instalacji sprawdź, czy wszystkie komponenty są obecne:

  • Wall Sconce Fixture (Matte Brass)
  • White Pleated Fabric Shade
  • Mounting Hardware (Crossbar, mounting screws, wire nuts)
  • Instrukcja obsługi

Note: E12/Candelabra Base 60W bulb and dimmer switch are sold separately and are not included in this package.

Konfiguracja i instalacja

Przed rozpoczęciem pracy należy upewnić się, że zasilanie wyłącznika obwodu lub skrzynki bezpiecznikowej jest wyłączone.

Wymagane narzędzia (nie dołączone):

  • Śrubokręt krzyżakowy
  • Ściągacze izolacji
  • Taśma izolacyjna
  • Okulary ochronne

Kroki instalacji:

  1. Wyłącz zasilanie: Locate the circuit breaker or fuse box and turn off the power to the wall switch outlet box where you will install the fixture.
  2. Przygotuj powierzchnię montażową: W przypadku wymiany istniejącej oprawy, należy ją ostrożnie zdemontować. Upewnij się, że puszka elektryczna jest solidnie zamontowana i wytrzyma ciężar oprawy.
  3. Attach Mounting Crossbar: Secure the mounting crossbar to the electrical outlet box using the provided mounting screws. Ensure the crossbar is level.
  4. Wykonaj połączenia elektryczne:
    • Połącz czarny przewód od oprawy do czarny (Live) wire from the outlet box using a wire nut.
    • Połącz biały przewód od oprawy do biały (Neutral) wire from the outlet box using a wire nut.
    • Połącz grunt przewód od oprawy do grunt wire from the outlet box (or to the green ground screw on the crossbar) using a wire nut.

    Ensure all wire nuts are securely tightened and wrap connections with electrical tape for added safety.

  5. Zamontuj oprawę: Carefully tuck the wires into the outlet box. Align the fixture base with the mounting screws on the crossbar and secure the fixture in place with the decorative nuts or screws provided.
  6. Zainstaluj żarówkę: Screw one E12/candelabra base 60W max bulb (sold separately) into the socket. Do not overtighten.
  7. Dołącz cień: Carefully place the white pleated fabric shade onto the fixture according to the design.
  8. Przywróć zasilanie: Turn the power back on at the circuit breaker or fuse box. Test the fixture.
Diagram showing the dimensions of the Globe Electric Clarissa Wall Sconce, including height, width, and depth.

Image: Dimensions of the Clarissa Wall Sconce. The fixture measures approximately 14.84 inches (37.7 cm) in height, 9.48 inches (24.1 cm) in width, and extends 5.68 inches (14.4 cm) from the wall.

Z bliska view of the Globe Electric Clarissa Wall Sconce, highlighting the matte brass finish and the white pleated fabric shade.

Obraz: Szczegółowy view of the sconce, showing the matte brass arm and base, and the textured white pleated fabric shade.

Instrukcja obsługi

Once installed and power is restored, operate the wall sconce using the wall switch connected to the fixture.

  • Włączanie/wyłączanie: Use the standard wall switch to turn the light fixture on or off.
  • Funkcja ściemniania: This fixture is fully dimmable. To utilize the dimming feature, you must install a compatible dimmer switch (sold separately) in place of a standard wall switch. Adjust the dimmer switch to achieve your desired light intensity.
  • Wybór żarówki: You can choose between lower wattage bulbs for a softer, more intimate glow or higher wattage bulbs (up to 60W) for brighter illumination, depending on your preference.
Globe Electric Clarissa Wall Sconce installed in a living room setting with curtains and a sofa, providing ambient light.

Image: The Clarissa Wall Sconce illuminating a living room, demonstrating its aesthetic and functional contribution to the space.

Konserwacja

Regular maintenance ensures the longevity and optimal performance of your wall sconce.

  • Czyszczenie: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish. The fabric shade can be gently dusted or spot cleaned with a damp jeśli to konieczne, szmatkę.
  • Wymiana żarówki: Ensure the power is off and the bulb has cooled completely before attempting to replace it. Unscrew the old bulb and screw in a new E12/candelabra base 60W max bulb.
  • Inspekcje: Okresowo sprawdzaj szczelność wszystkich połączeń elektrycznych i elementów montażowych.

Rozwiązywanie problemów

If your wall sconce is not functioning correctly, refer to the following common issues and solutions:

ProblemMożliwa przyczynaRozwiązanie
Światło się nie włącza.
  • Brak zasilania urządzenia.
  • Żarówka jest luźna lub uszkodzona.
  • Nieprawidłowe okablowanie.
  • Sprawdź wyłącznik/bezpiecznik. Upewnij się, że przełącznik ścienny jest włączony.
  • Dokręć lub wymień żarówkę.
  • Verify wiring connections (refer to Setup section). Consult an electrician if unsure.
Światło migocze.
  • Luźna żarówka.
  • Niekompatybilny przełącznik ściemniacza.
  • Wadliwa żarówka.
  • Dokręć żarówkę.
  • Ensure dimmer switch is compatible with LED/incandescent bulbs.
  • Wymień żarówkę.
Oprawa jest luźna na ścianie.
  • Śruby montażowe są poluzowane.
  • Turn off power. Tighten mounting screws.

If the problem persists after trying these solutions, contact a qualified electrician or Globe Electric customer support.

Specyfikacje

  • Model: Clarissa (65000083)
  • Marka: Globe Elektryczny
  • Typ: Kinkiet ścienny z 1 światłami
  • Skończyć: Mosiądz matowy
  • Materiał klosza: White Pleated Fabric
  • Wymiary: 10.37" dł. x 9.5" szer. x 14.88" wys. (ok. 26.3 cm dł. x 24.1 cm szer. x 37.8 cm wys.)
  • Podstawa żarówki: E12 / Candelabra
  • Maksymalna moctage: 60W (na żarówkę)
  • Typ żarówki: Żarówka lub dioda LED (żarówka nie jest dołączona)
  • Tomtage: 120 V
  • Możliwość przyciemniania: Yes, with compatible dimmer switch (sold separately)
  • Typ instalacji: Wall Mount, Corded Electric
  • Zastosowanie wewnątrz/na zewnątrz: Tylko wewnątrz
  • Waga przedmiotu: 1.03 funta (ok. 0.47 kg)

Informacje o gwarancji

According to product specifications, this Globe Electric Clarissa Wall Sconce (Model 65000083) is sold without a manufacturer's warranty. Please refer to the retailer's return policy for any issues upon purchase.

Wsparcie

For further assistance or inquiries regarding your Globe Electric product, please visit the official Globe Electric webstronie lub skontaktuj się z działem obsługi klienta.

Globe Electric Official Webstrona: www.globe-electric.com

You may also refer to the Globe Electric store on Amazon for additional product information: Globe Electric Amazon Store

Powiązane dokumenty - 65000083

Przedview Przewodnik po konfiguracji aplikacji Globe Suite i podłączaniu urządzeń inteligentnych
Dowiedz się, jak skonfigurować aplikację Globe Suite, podłączyć inteligentne urządzenia w trybach Scan, EZ lub AP oraz zintegrować je z asystentami głosowymi. Zawiera instrukcje weryfikacji sieci dla inteligentnych produktów oświetleniowych Globe Electric.
Przedview Instrukcja obsługi i konfiguracji inteligentnej żarówki LED Globe Electric
Szczegółowe instrukcje i specyfikacje inteligentnej żarówki LED Globe Electric, obejmujące konfigurację, sterowanie aplikacją, funkcje, gwarancję i informacje dotyczące bezpieczeństwa.
Przedview Globe Electric 65925 Plug-In or Hardwire Wall Sconce Installation Guide
Comprehensive installation instructions and safety precautions for the Globe Electric 65925 wall sconce. Learn how to safely install your plug-in or hardwire fixture, including hardware details, package contents, and electrical safety tips.
Przedview Instrukcja montażu lampy wiszącej Globe Electric Sydney
Szczegółowe instrukcje montażu i informacje dotyczące bezpieczeństwa lampy wiszącej Globe Electric Sydney, w tym lista części i dane kontaktowe.
Przedview Instrukcja montażu i informacje dotyczące bezpieczeństwa oprawy sufitowej Globe Electric 2-Light
Szczegółowe instrukcje instalacji, środki ostrożności i specyfikacje produktu dla oprawy Globe Electric Flush Mount z 2 światłami. Zawiera wielojęzyczną pomoc techniczną i identyfikację części.
Przedview Instrukcja montażu lampy wiszącej Globe Electric Sutton 1-Light w kolorze matowego mosiądzu do użytku na zewnątrz i wewnątrz
Instrukcja montażu lampy wiszącej Globe Electric Sutton 1-Light Matte Brass Outdoor Indoor. Zawiera ostrzeżenia dotyczące bezpieczeństwa, instrukcje dotyczące instalacji elektrycznej, listę części i dane kontaktowe.