Instrukcja obsługi pasków LED Lepro S1 AI

1. Wprowadzenie

Thank you for choosing the Lepro S1 AI LED Strip Lights. This intelligent lighting system combines advanced AI technology, vibrant MagicColor effects, and seamless smart home integration to enhance your living space. This manual provides essential information for safe installation, operation, and maintenance of your LED strip lights.

Obraz 1.1: Koniecview of the Lepro S1 AI LED Strip Lights and its control application.

2. Informacje dotyczące bezpieczeństwa

• Tylko do użytku wewnątrz pomieszczeń: This smart LED strip is nie wodoodporny and is not recommended for use in humid environments or outdoors.
• Zasilanie: Use only the provided power adapter. Do not connect the LED strip to any other power source.
• Cięcie paska: Cutting the LED strip compromises the integrity of the light effect and may lead to malfunction. It is not recommended.
• Powierzchnia instalacji: During installation, ensure the wall or surface is dry and clean. Hair, dust, and other elements can significantly affect the adhesive's effectiveness.
• Wentylacja: Do not cover the power adapter or LED strip with materials that could impede heat dissipation.
• Dzieci i zwierzęta: Przechowywać produkt w miejscu niedostępnym dla dzieci i zwierząt domowych.
• Sprzedaż: Produkt i jego elementy należy utylizować zgodnie z lokalnymi przepisami.

3. Zawartość opakowania

Po otwarciu opakowania należy sprawdzić jego zawartość, aby upewnić się, że wszystkie elementy są obecne i nieuszkodzone.

• Lepro S1 AI LED Strip (5 meters)
• Zasilacz
• Skrzynka sterownicza
• Adhesive Strips (pre-applied on LED strip)
• Mounting Clips and Screws (for optional secure installation)
• Instrukcja obsługi (ten dokument)

4. Przewodnik konfiguracji

4.1 Instalacja

1. Przygotuj powierzchnię: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust, oil, or debris.
2. Plan the Route: Unroll the LED strip and plan its placement. Avoid sharp bends or creases that could damage the strip.
3. Odklej i przyklej: Carefully peel off the protective backing from the adhesive tape on the back of the LED strip. Press the strip firmly onto the prepared surface, working in small sections.
4. Zabezpiecz za pomocą klipsów (opcjonalnie): For added security, use the provided mounting clips and screws to fasten the strip at regular intervals, especially around corners or areas with high traffic.

4.2 Połączenie zasilania

1. Connect the LED strip's connector to the control box. Ensure the arrows on both connectors align.
2. Podłącz zasilacz do skrzynki sterującej.
3. Plug the power adapter into a standard electrical outlet. The LED strip should light up briefly, indicating power.

4.3 Pobieranie i parowanie aplikacji

1. Pobierz aplikację: Szukaj "Lepro+" in your smartphone's app store (App Store for iOS or Google Play Store for Android). Notatka: Only use the "Lepro+" app, not "Lepro LampUX" or "Smart Life".
2. Zarejestruj się/Zaloguj: Open the Lepro+ app and follow the on-screen instructions to register a new account or log in if you already have one.
3. Dodaj urządzenie: In the app, tap the "+" icon to add a new device. Select "Lighting" or "LED Strip Lights" from the device list.
4. Tryb parowania: Follow the app's instructions to put the LED strip into pairing mode (usually by cycling power or pressing a button on the control box). The lights may flash to indicate pairing mode.
5. Połącz się z Wi-Fi: Ensure your smartphone is connected to a 2.4GHz Wi-Fi network. Enter your Wi-Fi password in the app to connect the LED strip.
6. Ukończenie: Po pomyślnym sparowaniu aplikacja potwierdzi połączenie, a Ty będziesz mógł zacząć sterować oświetleniem.

5. Instrukcja obsługi

5.1 Lepro+ App Control

The Lepro+ app is the primary interface for controlling your S1 AI LED Strip Lights, offering a wide range of customization options.

• AI LightGPM 2.0: This advanced AI model, trained on color psychology and lighting design, allows for intelligent light effect generation. Simply share an event or mood, and the strip will create the perfect MagicColor light effect.
• MagicColor Effects: Utilize the RGBIC technology to control lights smoothly and create perfect MagicColor light effects. This allows for multiple colors to be displayed on a single strip segment simultaneously, unlike traditional RGB.
• Segmented DIY Control: Customize individual segments of the LED strip with different colors and effects, giving you precise control over your lighting design.
• Tryby scen: Choose from a variety of pre-set scene modes for different occasions (e.g., Party, Relax, Reading).
• Koło kolorów: Select any color from the extensive color palette.
• Brightness & Saturation: Adjust the brightness and color saturation to your preference.

Image 5.1: MagicColor vs. RGB lighting.

Image 5.2: Millions of colors for diverse ambiance.

5.2 Sterowanie głosowe

The S1 AI LED Strip Lights can be controlled using voice commands through compatible smart assistants and the Lepro+ app.

• Alexa & Google Home: Link your Lepro+ account with Amazon Alexa or Google Assistant through their respective apps. Once linked, you can use voice commands like "Alexa, turn on the living room lights" or "Hey Google, set the LED strip to blue."
• Lepro+ App Voice Function: The Lepro+ app also features an integrated voice control function, allowing you to manage more complex emotions, scene suggestions, and voice commands directly within the app.

Image 5.3: AI Light for every mood.

Image 5.4: AI Light that understands you.

5.3 LightBeats Music Sync

Experience immersive lighting that reacts to sound. The LightBeats feature synchronizes the dynamic light effects with the rhythm of music or game sounds.

• Aktywacja: Enable Music Sync mode within the Lepro+ app.
• Mikrofon: The control box has a built-in microphone that picks up ambient sounds.
• Zastosowania: Perfect for game rooms, music rooms, party settings, smart TV backlighting, bedrooms, ceilings, kitchens, bars, and more.

Image 5.5: LightBeats Music Sync in action.

6. Konserwacja

• Czyszczenie: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the LED strip and control box. Do not use liquid cleaners or abrasive materials.
• Adhesive Longevity: To maintain adhesive strength, avoid frequently repositioning the strip. Ensure the installation surface remains clean and dry.
• Składowanie: If storing the LED strip for an extended period, ensure it is clean, dry, and rolled loosely to prevent damage to the LEDs or adhesive.

7. Rozwiązywanie Problemów

• Światła się nie włączają:
  • Ensure the power adapter is securely plugged into both the control box and the wall outlet.
  • Verify that the connection between the LED strip and the control box is firm and correctly aligned.
  • Sprawdź czy gniazdko elektryczne jest sprawne.
• Nie można połączyć się z aplikacją:
  • Ensure you are using the correct app: Trąd+.
  • Verify your Wi-Fi network is 2.4GHz. The S1 AI LED Strip does not support 5GHz Wi-Fi.
  • Make sure your phone is connected to the same 2.4GHz Wi-Fi network during pairing.
  • Try resetting the LED strip by unplugging it for 10 seconds and plugging it back in.
  • Ensure your Wi-Fi signal is strong where the strip is installed.
• Lights Display Incorrect Colors or Segments:
  • If the strip was cut, this may affect the light effect integrity.
  • Try recalibrating the colors through the Lepro+ app settings.
• Sterowanie głosowe nie działa:
  • Ensure your Lepro+ account is correctly linked to Alexa or Google Home.
  • Sprawdź swoje połączenie internetowe.
  • Sprawdź, czy nazwa urządzenia w aplikacji inteligentnego asystenta jest taka sama, jak nazwa używana w poleceniach głosowych.

8. Specyfikacje

9. Gwarancja i wsparcie

Aby uzyskać informacje o gwarancji i obsłudze klienta, zapoznaj się z oficjalną stroną Lepro website or contact Lepro customer service directly.

You can also visit the official Lepro brand store for more information and assistance:Lepro Brand Store

Proszę zachować dowód zakupu na wypadek ewentualnych roszczeń gwarancyjnych.