1. Koniec produktuview
The 6-inch Canless Wafer Downlight from Juno features an innovative, slim design that allows for quick and easy installation into as little as 3 inches of plenum space. This makes it suitable for ceiling spaces where traditional recessed housings may not fit. Wafers install directly into drywall, eliminating the need for separate recessed housings. Once installed, this versatile downlight offers an all-in-one design with switchable white color temperature and adjustable lumen output technology, providing the equivalent of 15 static products in one unit.
2. Główne cechy
- Canless Design: No housing required, installs directly from below the ceiling.
- Oszczędność energii: Long-life LEDs with a high-efficiency driver for superior illumination and extended service life.
- Możliwość przyciemniania: Smooth dimming capability down to 10 percent.
- Ratings & Listings: Certified for wet locations, CSA certified, and IC Rated for direct contact with insulation.
- Łatwa instalacja: Designed for quick retrofit, remodel, or new construction without the need for housing.
Obraz: Ponadview of key features including easy installation and switchable technology.
3. Konfiguracja i instalacja
The Juno Canless LED Wafer Downlight is designed for straightforward installation. Please ensure power is turned off at the circuit breaker before beginning any electrical work.
3.1. składniki
The product includes the LED wafer downlight and a remote driver box. The fixture and remote driver box are IC rated for direct contact with insulation.
Image: The main components of the downlight system, showing the LED wafer and its remote driver box.
3.2. Kroki instalacji
- Upewnij się, że zasilanie jest odłączone na głównym wyłączniku.
- Cut a hole in the ceiling according to the specified diameter for the 6-inch model. Refer to the product dimensions for precise measurements.
- Connect the remote driver box to the building's electrical wiring. Follow local electrical codes and guidelines.
- Connect the LED wafer downlight to the remote driver box.
- Insert the remote driver box into the ceiling opening.
- Push the LED wafer downlight into the ceiling opening. The spring clips will secure the fixture in place.
- Przywróć zasilanie i sprawdź światło.
Image: Detailed dimensions of the 6-inch downlight, showing its slim profile dla łatwej instalacji.
4. Instrukcja obsługi
This downlight offers adjustable settings to customize your lighting experience.
4.1. Regulacja temperatury barwowej
The remote driver box features a switch to select from five color temperature options:
- 2700 K miękki biały
- 3000K Ciepła biel
- 3500K neutralna biel
- 4000K Zimna biel
- 5000K Światło dzienne
4.2. Lumen Output Adjustment
The remote driver box also includes a switch for three adjustable lumen output settings:
- Niski
- Średni
- Wysoki
Image: Close-up of the remote driver box, highlighting the switches for adjusting color temperature and lumen output.
4.3. Ściemnianie
The downlight is dimmable to 10 percent with compatible dimmers. Ensure your dimmer switch is suitable for LED lighting to achieve optimal performance.
5. Konserwacja
The Juno Canless LED Wafer Downlight requires minimal maintenance. To clean the fixture, ensure power is off and gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish or electrical components.
6. Rozwiązywanie Problemów
If you experience issues with your downlight, consider the following common solutions:
- Brak światła: Check the circuit breaker to ensure power is on. Verify all electrical connections are secure.
- Migoczące światło: Ensure the dimmer switch is compatible with LED lighting. Check for loose connections.
- Incorrect Color/Brightness: Verify the switches on the remote driver box are set to your desired color temperature and lumen output.
Aby uzyskać bardziej szczegółowe instrukcje rozwiązywania problemów, zapoznaj się z oficjalną instrukcją Przewodnik rozwiązywania problemów (PDF).
7. Specyfikacje
| Atrybut | Wartość |
|---|---|
| Marka | Junona |
| Nazwa modelu | Bezpuszkowy |
| Numer części | WF6 ALO20 SWW5 90CRI MVOLT MW M6 |
| Rozmiar | 6-calowy |
| Kolor | Matowa biel |
| Tworzywo | Aluminium |
| Styl | Płaskie wykończenie |
| Formularz oprawy oświetleniowej | Wpuszczony |
| Typ pokoju | Bathroom, Bedroom, Conference Room, Game Room, Living Room |
| Wymiary produktu | 6.69" dł. x 6.69" szer. x 1.25" wys. |
| Zastosowanie wewnątrz/na zewnątrz | Wewnątrz, Na zewnątrz |
| Źródło zasilania | Podłączony na stałe |
| Typ instalacji | Kołnierz płaski |
| Funkcja specjalna | Adjustable Color Temperature, Dimmable, Energy Efficient, Low Voltage, Waterproof |
| Typ źródła światła | PROWADZONY |
| Tomtage | 120 wolty |
| Kolor światła | Regulowany biały |
| Cotage | 16 watów |
| Poziom wodoodporności | Wodoodporny |
| Producent | Oświetlenie marek Acuity |
| UPC | 197589217360 |
8. Gwarancja i pomoc techniczna
This Juno product comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty documentation included with your purchase or contact the manufacturer directly.
For additional support and to explore other Juno products, visit the official Sklep Juno na Amazonie.
