Instrukcja obsługi komputera rowerowego CYCPLUS G1 GPS

Produkt ponadview

The CYCPLUS G1 GPS Bike Computer is a compact and lightweight device designed to provide essential cycling data. It features dynamic GPS positioning for accurate tracking of your rides, displaying key metrics such as speed, distance, time, and altitude. Its user-friendly interface and robust design make it suitable for various cycling conditions.

Główne cechy

• Dynamiczne pozycjonowanie GPS: Higher sensitivity, accuracy, and faster positioning for tracking route, ride time, riding distance, total riding time, total riding mileage, clock, and current altitude.
• Automatyczne podświetlenie: Glare-free FSTN screen for clear visibility in sunlight or at night.
• IPX6 Wodoodporny: Bezprzewodowa i wodoodporna konstrukcja pozwala na korzystanie w warunkach deszczowych.
• Duża pojemność baterii: 1200 mAh battery provides over 50 hours of sustained working time.
• Automatyczny tryb uśpienia: Enters sleep mode after 10 minutes of inactivity, displaying last cycling data upon power-on.

Konfiguracja i instalacja

The CYCPLUS G1 is designed for quick and easy installation, eliminating the need for complex wiring or external sensors.

Montaż urządzenia

1. Secure the bike computer mount to your handlebar using the provided rubber bands. Ensure the mount is firmly attached and positioned for optimal viewing.
2. Align the G1 unit with the mount and twist it into place until it clicks securely.

Instrukcja obsługi

Włączanie/wyłączanie zasilania

To power on the device, press and hold the power button located on the side. To power off, press and hold the same button. The device will automatically enter sleep mode after 10 minutes of inactivity.

Data Display Modes

The G1 offers multiple data display pages. Use the mode button (typically the lower button) to cycle through different screens, showing various combinations of data such as current speed, total time, total distance, current time, and altitude.

Pozycjonowanie GPS

The G1 utilizes advanced GPS, BeiDou, QZSS, and Glonass systems for stable and accurate positioning. For optimal signal acquisition, especially during initial startup, ensure the device is in an open outdoor area.

Automatyczne podświetlenie

The device features an automatic backlight that adjusts to ambient light conditions, ensuring data is easily readable whether you are cycling during the day or at night.

Konserwacja

Ładowanie

The G1 is equipped with a built-in 1200 mAh battery. Use the provided Type-C charging cable to charge the device. A full charge typically takes 1 to 2 hours and provides over 50 hours of continuous operation.

Wodoodporność

The CYCPLUS G1 has an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. This allows you to ride daily without fear of rain, but it is not designed for submersion.

Rozwiązywanie problemów

Akwizycja sygnału GPS

If the device takes longer than expected to acquire a GPS signal, ensure you are in an open outdoor area with a clear view of the sky. Moving the device slightly or waiting a few minutes can help establish a stronger connection.

Nieprawidłowy wyświetlacz czasu

The G1 sets its clock based on GPS time. If the time displayed is incorrect, you may need to adjust the time zone setting. Refer to the included user manual for detailed instructions on how to set the correct time zone for your location.

Specyfikacje

Gwarancja i wsparcie

All CYCPLUS products are covered with a two-year warranty. For any problems or inquiries, please feel free to contact CYCPLUS customer support. They are available to assist you with any issues you may encounter.