XPG Core Reactor II Power Supply User Manual

1. Wprowadzenie

The XPG Core Reactor II Power Supply is a high-performance component designed to provide stable and efficient power to your computer system. With 750W of power and 80 Plus Gold certification, it ensures high energy efficiency. Its Full Modular design simplifies installation and cable management. The Active PFC (Power Factor Correction) feature further enhances overall system performance by delivering consistent and reliable power, crucial for demanding PC operations.

2. Informacje dotyczące bezpieczeństwa

Please read and understand all safety instructions before installing or operating the power supply. Failure to do so may result in personal injury or damage to the product or other components.

• Bezpieczeństwo elektryczne: Always disconnect the power cord from the wall outlet before installing, removing, or cleaning the power supply. Ensure your hands are dry when handling electrical components.
• Prawidłowe uziemienie: Ensure your computer system and the power outlet are properly grounded to prevent electrical shock.
• Wentylacja: Do not block the ventilation openings of the power supply. Ensure adequate airflow around the unit to prevent overheating.
• Środowisko: Używaj zasilacza w suchym, dobrze wentylowanym pomieszczeniu. Unikaj narażenia na wilgoć, kurz i ekstremalne temperatury.
• Obsługiwanie: Handle the power supply with care. Avoid dropping or subjecting it to strong impacts.
• Autoryzowany serwis: Do not attempt to open or repair the power supply yourself. Refer all servicing to qualified service personnel. Opening the unit will void the warranty.

3. Zawartość opakowania

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact your retailer or XPG support.

• XPG Core Reactor II Power Supply Unit
• Modular Cable Set (including ATX 24-pin, EPS/CPU 4+4-pin, PCIe 6+2-pin, SATA, and Peripheral cables)
• Przewód zasilający AC
• Śruby montażowe
• Instrukcja obsługi (ten dokument)

Image: The XPG Core Reactor II Power Supply unit, showcasing its black finish, fan grille, and modular cable ports. The image also implies the presence of various modular cables for system connection.

4. Konfiguracja i instalacja

Follow these steps to properly install your XPG Core Reactor II Power Supply into your computer system.

1. Przygotuj swój system: Upewnij się, że komputer jest całkowicie wyłączony i odłączony od gniazdka ściennego. Otwórz obudowę komputera.
2. Wyjmij stary zasilacz (jeśli dotyczy): Odłącz wszystkie kable od starego zasilacza i wykręć śruby mocujące. Ostrożnie wysuń go z obudowy.
3. Mount the New Power Supply: Position the XPG Core Reactor II Power Supply in the designated PSU bay of your computer case. Ensure the fan is oriented correctly (typically facing downwards or upwards depending on case design and ventilation). Secure it with the provided mounting screws.
4. Podłącz kable modułowe: Due to its full modular design, you only need to connect the cables required for your components.
   • Zasilanie płyty głównej: Connect the 24-pin ATX cable to the corresponding port on the power supply and the motherboard.
   • Moc procesora: Connect the 4+4-pin EPS/CPU cable to the power supply and the CPU power connector(s) on your motherboard.
   • Moc karty graficznej: Connect the 6+2-pin PCIe cables to the power supply and your graphics card(s). Use separate cables for each connector on high-power GPUs if possible.
   • Urządzenia SATA: Podłącz kable zasilające SATA do dysków SSD, HDD i napędów optycznych.
   • Urządzenia peryferyjne: Connect peripheral (Molex) cables for case fans or other accessories as needed.
5. Zarządzanie kablami: Ułóż kable w uporządkowany sposób, aby poprawić przepływ powietrza i estetykę obudowy.
6. Zamknij obudowę i podłącz zasilanie: Gdy wszystkie połączenia będą bezpieczne, zamknij obudowę komputera. Podłącz przewód zasilający do zasilacza, a następnie do gniazdka ściennego.

5. Instrukcja obsługi

Operating the XPG Core Reactor II Power Supply is straightforward once installed.

• Włączanie: Ensure the power switch on the back of the power supply (next to the AC inlet) is in the 'I' (On) position. Then, power on your computer using the case's power button.
• Efektywność: The 80 Plus Gold certification indicates high energy efficiency, meaning less wasted heat and lower electricity consumption compared to less efficient power supplies.
• Aktywny PFC: The Active Power Factor Correction feature automatically adjusts the input current waveform to improve the power factor, leading to more stable and cleaner power delivery to your components.
• Wyłączone: To shut down your system, use the operating system's shutdown function. For complete power disconnection, switch the power supply's switch to the 'O' (Off) position and unplug the AC power cord.

6. Konserwacja

Regularna konserwacja pomaga zapewnić długowieczność i optymalną wydajność zasilacza.

• Usuwanie kurzu: Periodically (e.g., every 3-6 months), power off and unplug your computer. Use compressed air to gently blow dust out of the power supply's fan grille and ventilation openings. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the bearings.
• Kontrola kabla: Occasionally check all connected modular cables to ensure they are securely seated and free from damage.
• Kontrola środowiskowa: Ensure the operating environment remains clean, dry, and within recommended temperature ranges.

7. Rozwiązywanie Problemów

If you encounter issues with your XPG Core Reactor II Power Supply, refer to the following common troubleshooting steps:

If the problem persists after trying these steps, please contact XPG customer support for further assistance.

8. Specyfikacje

9. Gwarancja i wsparcie

For warranty information, technical support, or service inquiries regarding your XPG Core Reactor II Power Supply, please visit the official XPG webodwiedź witrynę lub skontaktuj się bezpośrednio z działem obsługi klienta.

You can also visit the official XPG Store on Amazon for product information and support resources:

Visit the XPG Store on Amazon