Instrukcja obsługi sztucznej choinki Yaheetech o długości 6 stopy z oświetleniem

1. Wprowadzenie

This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your Yaheetech 6ft Pre-lit Artificial Christmas Tree. Please read all instructions carefully before setup and retain this manual for future reference.

The Yaheetech 6ft Pre-lit Artificial Christmas Tree is designed to provide a festive ambiance with its lush green flocked branches and incandescent warm white lights. It features a sturdy metal stand and a space-saving collapsible design for convenient storage.

2. Informacje dotyczące bezpieczeństwa

• Tylko do użytku wewnątrz pomieszczeń: Ten produkt jest przeznaczony wyłącznie do użytku w pomieszczeniach. Nie używać na zewnątrz.
• Bezpieczeństwo elektryczne: Ensure the power outlet is easily accessible and unplug the tree when not in use or before performing any maintenance. Do not overload electrical outlets.
• Stabilne umiejscowienie: Always place the tree on a flat, stable surface to prevent tipping.
• Trzymać z dala od ciepła: Position the tree away from heat sources such as fireplaces, radiators, or heaters.
• Dzieci i zwierzęta: Keep children and pets away from the tree during assembly and ensure all parts are securely fastened. Small parts could be a choking hazard.
• Obsługa oddziału: The branches are made of PVC and are designed to be flexible. Handle with care to avoid damage.

3. Zawartość opakowania

Przed rozpoczęciem montażu należy sprawdzić, czy wszystkie elementy są obecne:

• Tree Sections (3 sections: A, B, C - typically labeled)
• Składany metalowy stojak
• Set Screws for Stand
• Ochronne plastikowe nakładki na nóżki stojaka
• Pre-installed Incandescent Warm White Lights

4. Instalacja i montaż

Aby złożyć choinkę, wykonaj następujące kroki:

1. Złóż stojak: Unfold the metal stand and insert the set screws into the designated holes. Tighten the screws to secure the stand. Attach the protective plastic caps to the feet of the stand to prevent floor scratches.
2. Włóż dolną część (C): Locate the bottom tree section (usually labeled 'C'). Remove any protective plastic caps from the pole. Insert the pole of section C into the assembled stand.
3. Insert Middle Section (B): Locate the middle tree section (usually labeled 'B'). Remove any protective plastic caps. Carefully align and insert the pole of section B into the top of section C.
4. Insert Top Section (A): Locate the top tree section (usually labeled 'A'). Remove any protective plastic caps. Carefully align and insert the pole of section A into the top of section B.
5. Połącz sznury świetlne: Once all tree sections are in place, connect the electrical plugs from each section. Ensure all connections are secure.
6. Rozwiej gałęzie: Starting from the bottom section and working your way up, gently pull apart and shape each branch and branch tip. Bend them outwards and slightly upwards to create a full, natural appearance. This process may take 1-1.5 hours for a 6ft tree.

Figure 1: Visual guide for tree assembly. Steps include stand setup, inserting sections, connecting lights, and fluffing branches.

5. Instrukcja obsługi

Your Yaheetech Christmas tree comes pre-lit with incandescent warm white lights.

• Włączanie/wyłączanie: Plug the main power cord into a standard electrical outlet. The lights should illuminate. Unplug to turn off.
• Puszystość dla uzyskania pełności: After initial assembly, allow the tree to settle for approximately 24 hours. The branches will naturally expand further, contributing to a fuller appearance. Adjust branches as needed to fill any gaps.

Figure 2: Illustration of the tree's appearance before and after proper branch fluffing.

6. Konserwacja

• Czyszczenie: To clean the tree, gently wipe branches with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Składowanie: When disassembling for storage, reverse the assembly steps. Carefully fold the branches upwards and compress them to fit back into the original packaging or a suitable storage bag. Store in a cool, dry place away from direct sunlight.

7. Rozwiązywanie Problemów

• Światła nie działają:
  • Check all electrical connections between tree sections to ensure they are securely plugged in.
  • Verify that the main power cord is properly plugged into a functional wall outlet.
  • Inspect individual bulbs for looseness or breakage. Replace any faulty bulbs if spare bulbs are provided (check package contents).
• Tree Instability:
  • Ensure the metal stand is fully unfolded and the set screws are tightened.
  • Confirm that the bottom tree section is fully inserted into the stand.
  • Ustaw choinkę na płaskiej, równej powierzchni.

8. Specyfikacje

Figure 3: Tree dimensions and key features.

9. Gwarancja i wsparcie

For warranty information or product support, please refer to the documentation included in your product packaging or contact Yaheetech customer service directly. Keep your purchase receipt for warranty claims.