LAUNCH X-431 ECU TCU Programming Tool Instruction Manual

1. Wprowadzenie

The LAUNCH X-431 ECU TCU Programming Tool is a sophisticated device designed for reading, writing, and cloning Engine Control Units (ECU) and Transmission Control Units (TCU). It supports operations through BENCH and BOOT modes, facilitating the replacement of both new and used components. This tool also offers essential functions such as chip ID reading, EEPROM and FLASH data backup, restoration, and Checksum Correction to ensure proper ECU functionality after data modification.

Figure 1.1: LAUNCH X-431 ECU TCU Programming Tool and accessories.

2. Funkcje produktu

• Supports read, write, and clone operations for ECU and TCU via BENCH and BOOT modes.
• Facilitates easy replacement of new or used components, reducing costs and complexity.
• Includes functions for chip ID reading, EEPROM data backup, FLASH data backup, and data restoration.
• Features Checksum Check to ensure proper ECU functionality after data modification.
• Offers multi-language support: English, Japanese, German, Russian, Italian, Spanish, Portuguese, Arabic, French, Korean.
• Covers diverse vehicle models including cars, motorcycles, tractors, and trucks.
• Comes with 32pcs Matching Adapters for jumper preparation.
• Software features receive free upgrades.

3. Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie wymienione poniżej elementy:

Figure 3.1: Detailed packing list diagram.

• Jednostka główna
• Kabel USB (typ B)
• Kabel MCU V1
• Kabel trybu stołowego
• Matching Adapter A (5 Pcs)
• Matching Adapter B (6 Pcs)
• Matching Adapter C (7 Pcs)
• Matching Adapter D (6 Pcs)
• Matching Adapter E (6 Pcs)
• Zasilacz
• Europejski przewód zasilający
• User Manual (PDF link provided in Section 9)
• Lista rzeczy do spakowania
• Koperta na hasło
• Etui transportowe

3.1. Film z rozpakowywania

Watch this video for a visual guide to unboxing and identifying the components of your LAUNCH ECU TCU Programmer.

4. Wymagania systemowe

• System operacyjny: Windows 10
• A personal computer is required to run the dedicated LAUNCH PC software. The download link for the software can be found in the user manual (PDF) or on the product page.

5. Konfiguracja

Before operating the device, ensure proper connections are made between the LAUNCH X-431 ECU TCU Programming Tool, your computer, and the ECU/TCU. The tool utilizes BENCH and BOOT modes for direct connection to the control units.

Figure 5.1: Connection diagram for the ECU TCU Programmer to a PC and ECM.

Use the provided 32pcs Matching Adapters for jumper preparation to establish a stable connection with various ECU/TCU types. Refer to the specific wiring diagrams within the software for your particular vehicle model and ECU/TCU.

6. Instrukcja obsługi

6.1. ECU/TCU Cloning Procedure

The primary function of this tool is to clone ECU and TCU data, allowing for seamless replacement of control units. This process involves reading data from an existing ECU/TCU and writing it to a new or used one.

Figure 6.1: ECU/TCU cloning process overview.

For a detailed demonstration of the cloning process, specifically for a MED17.7.9 engine control unit, please refer to the video below. The steps generally involve:

1. Connect the X-431 ECU&TCU Programmer to your computer and the target ECU/TCU.
2. Launch the LAUNCH PC software.
3. Select the appropriate ECU model (e.g., MED17.7.9) within the software.
4. Follow the on-screen instructions for direct connection and diagram display.
5. Read the chip ID.
6. Read EEPROM data and save it.
7. Read FLASH data and save it.
8. Write the saved EEPROM data to the new/target ECU/TCU.
9. Write the saved FLASH data to the new/target ECU/TCU.
10. Disconnect the device safely.

6.2. Checksum Correction

The tool supports Checksum Check functionality, which is crucial for validating data integrity after modifying or cloning ECU/TCU data. This ensures that the control unit operates correctly and reliably.

Figure 6.2: Software interface demonstrating the Checksum Correct feature.

7. Important Notes and Limitations

Please be aware of the following important considerations:

Figure 7.1: Official statement from LAUNCH regarding product functionalities.

• Ten produkt nie obsługuje fault code blocking, power modifications, mileage adjustments, or VIN modifications.
• The tool is not designed for key programming; its sole purpose is to clone relevant data to the ECU or TCU.
• Anti-theft deactivation functionality is currently only supported for a subset of ECUs (MEDC17 ECUs). This feature is not the primary focus of the product.
• Always refer to the instruction manual and the ECU compatibility list before performing any operations.

8. Konserwacja

• Keep the device and its accessories clean and free from dust and moisture.
• Store the tool in its original carrying case when not in use to prevent damage.
• Unikaj wystawiania urządzenia na działanie ekstremalnych temperatur lub bezpośredniego światła słonecznego.
• Regularnie sprawdzaj kable i złącza pod kątem oznak zużycia lub uszkodzeń.

9. Rozwiązywanie Problemów

If you encounter any issues while using the LAUNCH X-431 ECU TCU Programming Tool, consider the following:

• Ensure all connections are secure and correctly made according to the software's wiring diagrams.
• Verify that the correct ECU/TCU model is selected in the software.
• Check your PC's operating system and ensure the LAUNCH software is up-to-date.
• For persistent issues, refer to the comprehensive user guide PDF or contact LAUNCH customer support.

10. Specyfikacje

11. Gwarancja i wsparcie

LAUNCH provides free software upgrades for this product, ensuring continued functionality and compatibility with new vehicle models and features. For comprehensive support, detailed operational procedures, and the latest software download links, please refer to the official User Guide PDF:

Pobierz oficjalny podręcznik użytkownika (PDF)

For further assistance, you may contact LAUNCH customer support through their official channels.