Suptek MT5082 Tilt TV Wall Mount Instruction Manual

Wstęp

Thank you for choosing the Suptek MT5082 Tilt TV Wall Mount. This manual provides detailed instructions for safe and proper installation, operation, and maintenance of your new TV wall mount. Please read all instructions carefully before beginning installation to ensure a secure and optimal viewzdobywania doświadczenia.

Ważne informacje dotyczące bezpieczeństwa

OSTRZEŻENIE: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty. Improper installation can lead to serious injury or damage.

• Upewnij się, że powierzchnia montażowa może bezpiecznie utrzymać łączny ciężar uchwytu i telewizora.
• Nie przekraczać maksymalnego udźwigu wynoszącego 60 kg (132 funtów).
• This mount is designed for wood studs up to 24 inches apart, or solid concrete/brick walls. Do not mount on drywall alone.
• Aby dokładnie zlokalizować drewniane kołki, zawsze używaj wykrywacza belek.
• Use the provided hardware. If your TV requires different screws, consult your TV's manual or a hardware professional.
• Do montażu zalecane są dwie osoby.
• Podczas instalacji należy trzymać dzieci i zwierzęta z daleka.

Kontrole przed instalacją

Before you begin, verify the following to ensure compatibility and a successful installation:

• Rozmiar telewizora: Kompatybilny z większością telewizorów o przekątnej 37-82 cali.
• Waga telewizora: Your TV must weigh no more than 132 lbs (60 kg).
• Wzór VESA: Check the back of your TV for the four mounting holes. Measure the horizontal and vertical distance between these holes. The VESA pattern must be between Min: 200x100 mm and Max: 600x400 mm.
• Gniazda kablowe: Ensure the mount will not block any cable outlets or ports on the back of your TV.
• Typ ściany: This mount is suitable for wood studs (up to 24" apart) or solid concrete/brick walls.

Image: Pre-installation checks including VESA compatibility (Min: 200x100 mm, Max: 600x400 mm), cable outlet considerations, TV weight (Max 132 lbs) and size (37-82"), and compatible wall types (wood studs up to 24" apart, concrete/brick wall).

Zawartość opakowania

Sprawdź, czy wszystkie elementy są na miejscu i nieuszkodzone. Jeśli brakuje którejkolwiek części lub jest ona uszkodzona, skontaktuj się z obsługą klienta.

Image: A comprehensive layout of all components included in the MT5082 package, featuring the wall plate, TV brackets, various screws, washers, spacers, a magnetic bubble level, and an Allen key.

The package includes the wall plate assembly, TV brackets, a magnetic bubble level, various bolts (M4, M6, M8), washers, spacers, and an Allen key for adjustments.

Konfiguracja i instalacja

Aby instalacja była bezpieczna, należy dokładnie wykonać poniższe czynności.

Krok 1: Zamontuj płytę ścienną

Connect the two main sections of the wall plate using the provided screws. Ensure they are securely fastened.

Krok 2: Przymocuj wsporniki do telewizora

Select the appropriate bolts, washers, and spacers for your TV's VESA pattern. Attach the TV brackets to the back of your television. Ensure the side of the bracket with the locking mechanism faces outwards. Tighten securely.

Krok 3: Przymocuj płytę ścienną do ściany

Position the assembled wall plate on your desired wall location. Use the magnetic bubble level to ensure it is perfectly horizontal. Mark the drilling points. For wood studs, drill pilot holes and secure the wall plate using the self-tapping screws. For concrete/brick walls, drill pilot holes, insert anchors, and then secure the wall plate with screws. Nie montować wyłącznie na płycie gipsowo-kartonowej.

Image: A visual guide to the 1-2-3 easy installation process: 1. Attach brackets to TV, 2. Attach wall plate to wall, 3. Hang TV on the wall plate.

Image: Easy installation guidelines, showing successful mounting on wood studs (up to 24" apart with self-tapping screws) and concrete/brick walls (with anchors), and explicitly stating not to mount on drywall alone.

Step 4: Hang and Secure TV to Wall Plate

Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure both brackets are properly seated. Pull down the locking cords to secure the TV in place. The cords will click when locked.

Instrukcja wideo instalacji

Instrukcja obsługi

Regulacja nachylenia

The Suptek MT5082 allows for a tilt adjustment of 0-8 degrees forward. To adjust the tilt, loosen the tilt adjustment screws on the TV brackets using the provided Allen key, set your desired angle, and then re-tighten the screws to secure the TV in position. This feature helps reduce glare and optimize your viewkąt.

Image: A woman sitting on the floor, viewing a wall-mounted TV that is tilted forward (0-8 degrees) to prevent glare, illustrating the anti-glaring feature.

Niski Profile Projekt

This mount features a low-profile design, keeping your TV approximately 1.5 inches from the wall. This minimizes the gap between the TV and the wall, providing a sleek and tidy appearance.

Obraz: strona A view of a wall-mounted television, highlighting its low profile design which positions the TV approximately 1.5 inches from the wall, contributing to a space-saving and clean aesthetic.

Quick Lock and Release

The mount includes a quick lock and release mechanism for easy removal of the TV when needed. Simply pull down the cords located at the bottom of the TV brackets to unlock and lift the TV off the wall plate.

Image: A hand pulling down a cord from beneath a wall-mounted TV, illustrating the quick lock and release function that allows for easy removal of the television from the wall plate.

Konserwacja

Regular maintenance ensures the longevity and safety of your TV wall mount:

• Czyszczenie: Przetrzyj uchwyt miękką, suchą ściereczką, aby usunąć kurz. Unikaj stosowania środków czyszczących o działaniu ściernym i rozpuszczalników.
• Kontrola: Okresowo sprawdzaj wszystkie śruby i połączenia, aby upewnić się, że są dobrze dokręcone i zabezpieczone. W razie potrzeby dokręć je ponownie.
• Kontrola wagi: Do not place additional weight on the TV or mount beyond its specified capacity.

Rozwiązywanie problemów

Jeśli napotkasz jakiekolwiek problemy, zapoznaj się z poniższymi typowymi problemami i rozwiązaniami:

• Telewizor nie jest wypoziomowany: Ensure the wall plate was installed level using the bubble level. Adjust the wall plate if necessary, or use the tilt adjustment feature to compensate for minor discrepancies.
• Telewizja wydaje się niestabilna: Verify that all mounting screws for both the wall plate and TV brackets are securely tightened. Ensure the wall type is appropriate and studs were properly located.
• Cannot tilt the TV: Loosen the tilt adjustment screws on the TV brackets. If they are too tight, the tilt mechanism will be locked.
• Cords are visible: The mount includes Velcro straps to manage cables and keep them tidy behind the TV.

Specyfikacje

Informacje o gwarancji

Suptek products are manufactured with quality and durability in mind. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the product packaging or contact Suptek customer support.

Obsługa klienta

If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Suptek customer support. Our team is available to help you.

Wsparcie online: Visit the official Suptek webwitryna z odpowiedziami na często zadawane pytania, poradnikami rozwiązywania problemów i informacjami o możliwościach kontaktu.

E-mail: Refer to your product packaging for the most current customer service email address.