TRENDnet AX3000 Dual Band WiFi 6 PoE+ Access Point TEW-923DAP Instruction Manual

1. Koniecview

This manual provides detailed instructions for the installation, configuration, and operation of the TRENDnet AX3000 Dual Band WiFi 6 PoE+ Access Point, model TEW-923DAP. This device is designed to enhance wireless network performance with WiFi 6 technology, offering high-speed connectivity across two concurrent bands.

Główne cechy obejmują:

• AX3000 Wi-Fi 6: Delivers up to 2402Mbps on the 5GHz band and 573Mbps on the 2.4GHz band.
• 2.5GBASE-T PoE+ Port: Single port for both data and power, simplifying installation.
• MU-MIMO i OFDMA: Technologies that improve efficiency and performance in environments with multiple connected devices.
• Szyfrowanie WPA3: Enhanced wireless security protocol.
• Tryby pracy: Supports Access Point (AP) and Repeater modes.
• Sterowanie pasmem: Automatically directs devices to the less congested 5GHz band.
• Niskoprofile Projekt: Blends into various environments with included wall/ceiling mounting options.

Obraz 1.1: Przód view of the TRENDnet AX3000 Dual Band WiFi 6 PoE+ Access Point.

Image 1.2: Diagram illustrating the AX3000 dual-band WiFi 6 speeds (2.4GHz at 573Mbps and 5GHz at 2402Mbps).

Image 1.3: Illustration of MU-MIMO and OFDMA technology improving performance for multiple devices.

2. Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się następujące elementy:

• TRENDnet AX3000 Dual Band WiFi 6 PoE+ Access Point (TEW-923DAP)
• Szybki przewodnik instalacji
• Kabel sieciowy (0.5 m)
• Mounting plates and hardware

Image 2.1: The TEW-923DAP Access Point shown with its included mounting plates, network cable, and installation hardware.

3. Opis fizyczny

The TEW-923DAP features a compact, low-profile design. Key interfaces are located on the underside of the device.

3.1 Interfejsy urządzenia

• 2.5GBASE-T PoE+ LAN Port: This port supports 802.3at PoE+ for both power input and data connection.
• Port zasilania: For optional 12V DC, 1A external power adapter (not included).
• Wskaźnik LED: Dostarcza informacji o statusie.
• Przycisk resetowania: Służy do przywracania ustawień fabrycznych lub ponownego uruchamiania.

Image 3.1: Labeled view of the TEW-923DAP's LED indicator, power port, 2.5GBASE-T PoE+ LAN port, and reset button.

Obraz 3.2: Zbliżenie view of the 2.5G PoE+ port on the TEW-923DAP.

4. Konfiguracja i instalacja

Follow these steps to install and set up your TRENDnet AX3000 Access Point.

4.1 Montaż punktu dostępowego

The TEW-923DAP can be mounted on a wall or ceiling using the provided mounting plates.

1. Select a central location for optimal WiFi coverage.
2. Use the mounting plate as a template to mark drilling points on the wall or ceiling.
3. Drill holes and insert the appropriate anchors if necessary.
4. Secure the mounting plate to the surface.
5. Attach the TEW-923DAP to the mounting plate by aligning and twisting until it locks into place.

Obraz 4.1: Examples of the TEW-923DAP mounted on a wall and a ceiling, demonstrating installation flexibility.

4.2 Zasilanie urządzenia

The TEW-923DAP supports Power over Ethernet Plus (PoE+).

• Korzystanie z PoE+: Connect an Ethernet cable from a PoE+ switch or PoE+ injector (e.g., TRENDnet 2.5G PoE+ Injector) to the 2.5GBASE-T PoE+ LAN port on the access point. This provides both power and data connectivity.
• Korzystanie z zasilacza sieciowego (opcjonalnie): If PoE+ is not available, connect a 12V DC, 1A external power adapter (not included) to the power port.

4.3 Połączenie sieciowe i konfiguracja początkowa

1. Connect the 2.5GBASE-T PoE+ LAN port to your network infrastructure (e.g., router or switch).
2. Power on the device. The LED indicator will show the device status.
3. Refer to the Quick Installation Guide for initial access credentials and instructions to log into the weboparty na interfejsie zarządzania.
4. Configure your desired WiFi network settings, including SSID, security type (WPA3 recommended), and passwords.

Obraz 4.2: Example network setup showing the TEW-923DAP in an office environment, connected via a 2.5G PoE+ Injector to a server rack.

5. Tryby pracy i funkcje

The TEW-923DAP offers flexible operating modes and advanced features to optimize your wireless network.

5.1 Tryb punktu dostępowego (AP)

In AP mode, the device creates a wireless local area network (WLAN) that allows wireless clients to connect to your wired network. This is the primary function for extending WiFi coverage.

5.2 Tryb wzmacniacza

In Repeater mode, the device extends the range of an existing wireless network by receiving wireless signals and re-transmitting them. This mode is useful for covering areas where the primary WiFi signal is weak.

5.3 Sterowanie pasmem

Band Steering automatically detects dual-band capable client devices and encourages them to connect to the 5GHz band. This helps to balance network load and improve overall performance by moving devices to the faster, less congested 5GHz frequency.

5.4 Wireless Security (WPA3)

The access point supports WPA3 encryption, providing robust security for your wireless network. It is recommended to use WPA3 for maximum protection against unauthorized access.

5.5 MU-MIMO and OFDMA

These WiFi 6 technologies enhance network efficiency:

• MU-MIMO (wielu użytkowników, wiele wejść, wiele wyjść): Allows the access point to communicate with multiple devices simultaneously, rather than sequentially, improving throughput for all connected clients.
• OFDMA (Ortogonalny Wielodostęp z Podziałem Częstotliwości): Divides WiFi channels into smaller sub-channels, enabling the access point to transmit data to multiple devices at once within a single transmission, reducing latency and improving efficiency.

6. Konserwacja

Regularna konserwacja gwarantuje optymalną wydajność i długą żywotność punktu dostępowego.

• Aktualizacje oprogramowania układowego: Periodically check the TRENDnet webStrona z aktualizacjami oprogramowania sprzętowego. Utrzymywanie aktualnego oprogramowania sprzętowego może poprawić wydajność, dodać nowe funkcje i wyeliminować luki w zabezpieczeniach.
• Środowisko fizyczne: Ensure the access point is installed in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Avoid placing it near large metal objects or other devices that may cause interference.
• Czyszczenie: Gently clean the exterior of the device with a soft, dry cloth. Do not use liquid or aerosol cleaners.
• Bezpieczeństwo sieci: Regularnie ponownieview your WiFi security settings and change passwords periodically to maintain network integrity.

7. Rozwiązywanie Problemów

If you encounter issues with your TEW-923DAP, refer to the following common troubleshooting steps.

7.1 Brak zasilania/wskaźnik LED wyłączony

• Verify that the Ethernet cable is securely connected to a PoE+ source.
• If using an optional power adapter, ensure it is correctly plugged into the device and a working power outlet.
• Check the PoE+ source (switch or injector) to ensure it is providing power.

7.2 Brak dostępu do Internetu

• Confirm that the access point is properly connected to your main network (router/modem).
• Check the status of your internet service provider's connection.
• Reboot the access point and your main network router.
• Ensure your client devices are connected to the correct WiFi network (SSID) and have the correct password.

7.3 Slow WiFi Speed or Intermittent Connection

• Relocate the access point to a more central position, away from obstructions and potential interference sources (e.g., microwaves, cordless phones).
• Ensure your client devices support WiFi 6 for optimal performance.
• Check for firmware updates for the access point.
• Verify that Band Steering is enabled to optimize client connections.

7.4 Przywracanie ustawień fabrycznych

If issues persist, you may need to perform a factory reset. This will revert all settings to their default values.

• With the device powered on, use a paperclip or similar pointed object to press and hold the Reset button for approximately 10-15 seconds until the LED indicator changes behavior (e.g., flashes rapidly).
• Release the button and allow the device to reboot.
• After a factory reset, you will need to reconfigure the access point.

8. Specyfikacje

9. Gwarancja i wsparcie

For warranty information, technical support, and additional resources, please visit the official TRENDnet webodwiedź witrynę lub zapoznaj się z dokumentacją dołączoną do produktu.

Możesz również odwiedzić TRENDnet Store on Amazon Więcej produktów i informacji.