1. Wprowadzenie
Thank you for choosing the Firecore F94T-XG 3 X 360 Laser Level and FT1500D Tripod. This comprehensive system provides an all-in-one leveling and alignment solution for various applications. The F94T-XG laser level projects three 360° green laser planes, offering superior visibility and precision for tasks such as aligning, leveling, plumbing, and squaring. Paired with the adjustable FT1500D aluminum alloy tripod, this kit ensures stable and accurate measurements for both interior and exterior projects. Please read this manual thoroughly before operation to ensure safe and effective use of your new tool.
2. Informacje dotyczące bezpieczeństwa
WARNING: Read and understand all safety warnings and instructions before operating this laser level. Failure to follow the warnings and instructions may result in serious injury.
2.1 Bezpieczeństwo laserowe
This product is a Class II laser product, with a power output of less than 1mW and a wavelength of 505-520nm. Direct eye exposure to the laser beam should be avoided.
- Nie patrz bezpośrednio w wiązkę lasera.
- Nie należy celowo kierować wiązki laserowej w stronę innych osób ani powierzchni odbijających światło.
- Nie należy używać poziomicy laserowej w atmosferach zagrożonych wybuchem, na przykład w obecności łatwopalnych cieczy, gazów lub pyłów.
- Przechowuj poziomnicę laserową poza zasięgiem dzieci.
- Należy używać wyłącznie wskazanych baterii i metod ładowania.
2.2 Ogólne zasady bezpieczeństwa
- Always ensure the work area is clear and well-lit.
- Do not modify the laser level or tripod.
- Protect the device from extreme temperatures, water, and impact.
- Clean the laser level with a soft, dry cloth. Do not use solvents.
3. Zawartość opakowania
The Firecore F94T-XG Laser Level and FT1500D Tripod kit includes the following items:
- Firecore F94T-XG 3 X 360 Laser Level
- Firecore FT1500D 60-inch Aluminum Alloy Laser Tripod
- 2 x 7.4V / 2600mAh Rechargeable Li-ion Batteries
- Kabel ładujący typu C i zasilacz
- Magnetic Pivoting Base
- Zielona Talerz Docelowy
- Instrukcja obsługi
- Carrying Case for Laser Level
- Shoulder Strap Bag for Tripod
4. Koniec produktuview
4.1 Firecore F94T-XG Laser Level
The F94T-XG is a robust and precise laser level designed for demanding job sites. It features an over-molded housing and IP65 water/dust resistance for durability.
- 3 x 360° Green Laser Lines: One horizontal and two vertical planes for full room coverage.
- Wysoka widoczność: Green beams are up to 4X brighter than standard red beams.
- Inteligentny system wahadłowy: Self-levels within ±4° in 3 seconds and indicates out-of-level conditions.
- Tryb impulsowy: Extends working range up to 197 ft (60m) with a Firecore FD30 laser detector.
- Zintegrowany uchwyt magnetyczny: Features 1/4 in. and 5/8 in. threads for versatile mounting.
- Disturbance Monitor: High-precision electronic motion sensor alerts if the tool position changes, ensuring consistent accuracy.
4.2 Firecore FT1500D Laser Tripod
The FT1500D tripod provides a stable and adjustable platform for your laser level, suitable for various applications.
- Regulowana wysokość: Expands from 20 inches to 60 inches (50 cm to 150 cm).
- Tworzywo: Crafted from quality aluminum for durability and lightweight portability.
- Projekt głowy: Flat head with 1/4-inch x 20 threaded studs, compatible with the F94T-XG.
- Szybkozłączka Clamps: For easy and secure leg adjustments.
5. Konfiguracja
5.1 Instalacja i ładowanie akumulatora
The F94T-XG uses two 7.4V / 2600mAh rechargeable Li-ion batteries.
- Otwórz pokrywę komory baterii znajdującą się z tyłu poziomicy laserowej.
- Insert the rechargeable Li-ion battery packs, ensuring correct polarity.
- Dokładnie zamknij pokrywę komory baterii.
- To charge, connect the Type-C charging cable to the battery pack (if charging separately) or directly to the laser level. Connect the power adapter to a suitable power outlet. The charging indicator will show charging status.
5.2 Attaching Laser Level to Tripod
The FT1500D tripod features both 1/4-inch and 5/8-inch mounting threads for compatibility.
- Extend the tripod legs and central column to your desired height. Use the quick-release clampaby je zabezpieczyć.
- Place the F94T-XG laser level onto the tripod head. The laser level's base has a 1/4-inch thread.
- Secure the laser level by rotating the mounting screw on the tripod head until it is firmly attached.
6. Instrukcja obsługi
6.1 Włączanie i tryb samopoziomowania
The F94T-XG features a Smart Pendulum System for automatic leveling.
- Unlock the pendulum by sliding the pendulum lock switch to the unlocked position.
- Press the power button to turn on the laser level. The laser lines will activate.
- Place the laser level on a stable surface or tripod. The Smart Pendulum System will automatically self-level within ±4°.
- If the device is out of its self-leveling range, the laser lines will flash rapidly to indicate an out-of-level condition. Adjust the position of the laser level until the lines stop flashing and become steady.
6.2 Manual Mode (Locking Lines)
For applications requiring lines at an angle, you can lock the pendulum.
- With the pendulum lock switch in the locked position, press and hold the power button for a few seconds to activate Manual Mode.
- The laser lines will turn on and remain steady, allowing you to project lines at any desired angle. The out-of-level alarm will be deactivated in this mode.
6.3 Pulse Mode (Detector Use)
Pulse mode extends the working range of the laser level, especially in bright lighting or outdoor conditions, when used with a compatible laser detector (e.g., Firecore FD30).
- In self-leveling mode, press the dedicated Pulse Mode button (if available, or cycle through modes) to activate Pulse Mode. The laser lines may appear dimmer to the naked eye but will be detectable by the receiver.
- Follow the instructions for your specific laser detector to locate the laser line at extended distances.
6.4 Zastosowania
The Firecore F94T-XG is versatile for various professional and DIY applications.
- Room layout and partitioning
- Alignment of conduit, lighting, and fixtures
- Flooring and tiling installation
- Drywall and window framing
- Montaż szafek i półek
7. Konserwacja
7.1 Czyszczenie
- Regularly clean the laser level and tripod with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the housing or optical components.
- Keep the laser apertures clean to ensure clear and accurate laser lines.
7.2 Przechowywanie
- Always lock the pendulum before storing or transporting the laser level to prevent damage to the internal mechanism.
- Store the laser level and tripod in their respective carrying cases when not in use.
- Przechowywać w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.
- If storing for extended periods, remove the batteries from the laser level.
7.3 Pielęgnacja baterii
- Przed pierwszym użyciem należy całkowicie naładować akumulatory.
- Do not expose batteries to excessive heat or direct flame.
- Zutylizuj baterie zgodnie z lokalnymi przepisami.
8. Rozwiązywanie Problemów
If you encounter issues with your Firecore F94T-XG laser level, refer to the table below for common problems and solutions.
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Linie laserowe migają szybko. | Laser level is out of its self-leveling range (±4°). | Place the laser level on a more level surface or adjust the tripod until the lines become steady. |
| Na zewnątrz linie laserowe są słabe lub niewidoczne. | Bright ambient light; not in Pulse Mode. | Activate Pulse Mode and use a compatible laser detector (e.g., Firecore FD30). Use the green target plate to enhance visibility over short distances. |
| Poziom laserowy nie włącza się. | Low battery; pendulum locked; power button not pressed correctly. | Charge or replace batteries. Ensure pendulum lock switch is in the unlocked position. Press the power button firmly. |
| Niedokładne pomiary. | Device not calibrated; pendulum not fully settled; disturbance during operation. | Ensure the device is on a stable surface and has fully self-leveled. Avoid disturbing the device during use. If persistent, contact customer support for calibration. |
| Żywotność baterii jest krótsza niż oczekiwano. | Batteries not fully charged; old batteries; operating in extreme temperatures. | Ensure batteries are fully charged. Replace old batteries if capacity has significantly degraded. Operate within recommended temperature ranges. |
9. Specyfikacje
| Funkcja | Specyfikacja |
|---|---|
| Klasa laserowa | Class II (IEC/EN60825-1/2014) |
| Długość fali lasera | 505-520 nm (zielony laser) |
| Dokładność poziomowania | ±1/9 inch at 33 ft (±3mm at 10m) |
| Zakres samopoziomowania | ±4° |
| Czas samopoziomowania | 3 sekund |
| Widoczny zasięg | Do 82 stóp (25 m) |
| Working Range with Detector | Up to 197 ft (60m) with Firecore FD30 |
| Stopień ochrony IP | IP65 (Water/Dust Resistance) |
| Źródło zasilania | 2 x 7.4V / 2600mAh Li-ion Batteries |
| Czas działania | Approx. 10 hours per battery (continuous use) |
| Gwint montażowy | 1/4 cala i 5/8 cala |
| Materiał statywu | Stop aluminium |
| Zakres wysokości statywu | 20 cala do 60 cali (50 cm do 150 cm) |
| Temperatura pracy | Not specified, generally 14°F to 122°F (-10°C to 50°C) for laser levels. |
| Temperatura przechowywania | Not specified, generally -4°F to 158°F (-20°C to 70°C). |
10. Gwarancja i wsparcie
Firecore products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Firecore website. If you have any questions, require technical assistance, or need to report an issue, please contact Firecore customer support through the following channels:
- Urzędnik Webstrona: www.firecoretools.com (Byłyample, actual link not provided in data)
- Wsparcie e-mailowe: Zapoznaj się z opakowaniem produktu lub oficjalnymi informacjami webstrona z adresem e-mail kontaktowym.
- Sklep Amazon: Odwiedź Firecore Store on Amazon Aby uzyskać informacje o produkcie i opcjach wsparcia.
Please have your model number (F94T-XG) and purchase date ready when contacting support.
