VTech CS2051

Instrukcja obsługi telefonu domowego VTech CS2051 DECT 2 z słuchawką bezprzewodową

Model: CS2051

1. Wprowadzenie

This manual provides instructions for the VTech CS2051 DECT 2 Handset Cordless Home Telephone with Answering Machine. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device. Please read these instructions carefully before using your telephone.

2. Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się następujące elementy:

  • 1 x Jednostka bazowa
  • 2 x słuchawki bezprzewodowe
  • 2 x Handset Chargers
  • 2 x AC Adaptors (for base unit and chargers)
  • 2 x Battery Packs (AAA batteries required, included)
  • 1 x przewód telefoniczny
  • 1 x Skrócona instrukcja obsługi
VTech CS2051 DECT 2 Handset Cordless Home Telephone with Base Unit and Charger

Image: The VTech CS2051 system, showing the main base unit with one handset, and a separate charger with the second handset.

3. Konfiguracja

3.1 Instalacja baterii

  1. Otwórz pokrywę komory baterii z tyłu każdego telefonu.
  2. Insert the supplied AAA battery pack, ensuring correct polarity.
  3. Zamknij pokrywę komory baterii.
  4. Place each handset on its respective charger or the base unit to charge for at least 16 hours before first use.

3.2 Podłączenie jednostki bazowej

  1. Podłącz jeden koniec przewodu telefonicznego do portu LINE w jednostce bazowej.
  2. Podłącz drugi koniec przewodu telefonicznego do gniazdka telefonicznego w ścianie.
  3. Connect the AC adaptor to the POWER port on the base unit.
  4. Plug the AC adaptor into a mains power outlet.
  5. For the additional charger, connect its AC adaptor to the charger and then to a mains power outlet.

3.3 Rejestracja telefonu komórkowego

Your handsets are typically pre-registered to the base unit. If a handset displays 'Unregistered' or 'Register Handset', follow these steps:

  1. Na jednostce bazowej naciśnij i przytrzymaj STRONA button for approximately 5 seconds until the registration indicator light flashes.
  2. On the handset, navigate to the 'Registration' menu (refer to the Quick Start Guide for specific menu navigation).
  3. Select 'Register Handset' and enter the system PIN (default is usually 0000).
  4. The handset will display 'Registering...' and then 'Handset Registered' upon successful completion.

4. Instrukcja obsługi

4.1 Wykonywanie i odbieranie połączeń

  • Zadzwonić: Naciśnij ROZMAWIAĆ button, then dial the number. Alternatively, dial the number first and then press ROZMAWIAĆ.
  • Aby odebrać połączenie: Gdy zadzwoni telefon, naciśnij ROZMAWIAĆ przycisk.
  • Aby zakończyć połączenie: Naciśnij KONIEC naciśnij przycisk lub odłóż słuchawkę na bazę/ładowarkę.

4.2 Cyfrowa automatyczna sekretarka

The base unit includes a digital answering machine to record messages when you are unavailable.

  • Odtwarzanie wiadomości: Naciśnij ODTWÓRZ/ZATRZYMAJ button on the base unit. The display will show the number of new messages.
  • Usuwanie wiadomości: Podczas odtwarzania wiadomości naciśnij USUWAĆ przycisk na jednostce bazowej.
  • Konfiguracja: Access the answering machine settings via the handset menu to record your outgoing message or adjust settings.
VTech CS2051 Base Unit with Digital Answering System Display

Image: The base unit of the VTech CS2051, highlighting the digital answering system with a message count display.

4.3 Nuisance Call Blocker

This feature allows you to block unwanted incoming calls.

  • Blokowanie numeru: During or after a call, access the call blocker menu on the handset. You can add numbers to a block list.
  • Blocking Unknown Numbers: The system can be configured to block calls from numbers not stored in your phonebook or from withheld numbers.
VTech CS2051 Handset with Call Blocker Feature

Image: A VTech CS2051 handset, illustrating the call blocker feature for managing unwanted calls.

4.4 Identyfikator dzwoniącego i połączenie oczekujące

These features require subscription from your telephone service provider.

  • Identyfikator dzwoniącego: The handset display shows the caller's number (and name if stored in your phonebook) before you answer. The phone stores up to 20 incoming call records.
  • Połączenie oczekujące: If you are on a call and another call comes in, you will hear a tone. You can switch between calls.
VTech CS2051 Handset Displaying Caller ID Information

Image: A close-up of the VTech CS2051 handset display showing an incoming call number, demonstrating the Caller ID feature.

4.5 Zestaw głośnomówiący

The speakerphone function allows for hands-free conversations.

  • Aktywować: Podczas połączenia naciśnij GŁOŚNIK przycisk.
  • Aby dezaktywować: Naciśnij GŁOŚNIK button again or lift the handset to your ear.
VTech CS2051 Handset in Speakerphone Mode

Image: A VTech CS2051 handset positioned for hands-free use, illustrating the speakerphone capability.

4.6 Domofon

You can use the handsets to communicate with each other internally.

  • To Initiate: Naciśnij INT button on one handset and select the desired handset to call.

4.7 Adjustable Ring Volume and Melody

Customize the ringtone and volume to your preference.

  • Access the 'Ringtone Settings' or 'Volume Settings' menu on the handset to choose from available melodies and adjust the ring volume.
VTech CS2051 Handset with Ring Volume Adjustment Highlighted

Image: A VTech CS2051 handset, highlighting the controls for adjusting ring volume and melody settings.

4.8 Funkcja alarmu i wyciszenia

  • Alarm: Set an alarm through the handset menu.
  • Niemy: Podczas połączenia naciśnij NIEMY button to temporarily silence your microphone. Press again to unmute.
VTech CS2051 Alarm and Mute Functionality

Image: Illustrates the alarm function (represented by a clock icon) and the mute function (represented by a musical note icon) available on the VTech CS2051.

5. Konserwacja

  • Czyszczenie: Wipe the telephone and handsets with a soft, damp ściereczka. Nie należy używać środków czyszczących o właściwościach ściernych ani rozpuszczalników.
  • Pielęgnacja baterii: Ensure handsets are placed on the charger when not in use to maintain battery life. Replace batteries when performance significantly degrades.
  • Lokalizacja: Place the base unit in a central location, away from other electrical appliances that may cause interference.

6. Rozwiązywanie Problemów

  • Brak sygnału wybierania: Ensure the telephone line cord is securely connected to both the base unit and the wall socket. Check if the AC adaptor is properly plugged in.
  • Słuchawka nie ładuje się: Verify the handset is correctly seated in the charger/base unit. Clean the charging contacts on both the handset and charger with a dry cloth.
  • Poor Call Quality/Interference: Move the base unit away from other electronic devices (e.g., Wi-Fi routers, microwaves). Ensure the handset is within range of the base unit.
  • Handset Displays 'Unregistered': Wykonaj kroki rejestracji telefonu opisane w rozdziale 3.3.
  • Sekretarka nie nagrywa: Check the answering machine settings via the handset menu to ensure it is enabled and has sufficient recording time.

7. Specyfikacje

FunkcjaSpecyfikacja
ModelCS2051
Typ telefonuDECT bezprzewodowy
Liczba słuchawek2
Typ systemu odbierającegoDigital (up to 15 minutes record time)
Identyfikacja dzwoniącegoTak (wymagana subskrypcja)
Nuisance Call BlockerTak
Wyświetlacz1.8-calowy podświetlany wyświetlacz
BaterieWymagane 4 baterie AAA (w zestawie)
TworzywoAkrylonitryl-butadien-styren (ABS)
Źródło zasilaniaZasilany bateryjnie
Operacja wieloliniowaTak

8. Gwarancja i wsparcie

This VTech CS2051 product is supplied as an Amazon Renewed item. For specific warranty details and support, please refer to the Amazon Renewed program terms and conditions or contact Amazon Renewed customer service directly. VTech provides manufacturing support for its products. For technical assistance or further information, please visit the official VTech support website or consult the full user manual if available from the manufacturer.

Powiązane dokumenty - CS2051

Przedview VTech Smart Call Blocker IS8129: Instrukcja obsługi i konfiguracja
Dowiedz się, jak skonfigurować i używać funkcji VTech Smart Call Blocker w bezprzewodowym systemie telefonicznym serii IS8129, aby filtrować niechciane połączenia, zarządzać numerami powitalnymi i konfigurować opcje filtrowania.
Przedview VTech Smart Call Blocker seria VS112: Podręcznik użytkownika i konfiguracja
Dowiedz się, jak skonfigurować i używać funkcji VTech Smart Call Blocker w bezprzewodowym systemie telefonicznym DECT 6.0 serii VS112, aby filtrować połączenia automatyczne i niechciane połączenia od osób dzwoniących.
Przedview VTech IS8151 Smart Call Blocker: Instrukcja obsługi i konfiguracja
Dowiedz się, jak używać inteligentnego blokera połączeń VTech IS8151 do filtrowania połączeń automatycznych i niechcianych. Ten przewodnik zawiera instrukcje konfiguracji, opcje konfiguracji oraz wskazówki dotyczące zarządzania listami połączeń w bezprzewodowym systemie telefonicznym DECT 6.0.
Przedview Instrukcja obsługi VTech VG208 / VG208-2: Funkcje, bezpieczeństwo i instrukcja obsługi
Kompleksowa instrukcja obsługi telefonów bezprzewodowych DECT 6.0 VTech VG208 i VG208-2. Dowiedz się więcej o instalacji, obsłudze, funkcjach takich jak automatyczna sekretarka, identyfikacja dzwoniącego, blokowanie połączeń, interkom, instrukcjach bezpieczeństwa oraz specyfikacjach technicznych.
Przedview Szybki przewodnik po VTech CS2050/CS2051/CS2052/CS2053
Kompleksowy przewodnik po konfiguracji i użytkowaniu bezprzewodowego systemu telefonicznego VTech CS2050, CS2051, CS2052 lub CS2053, obejmujący instrukcje bezpieczeństwa, rejestrację produktu, informacje o gwarancji i konfiguracji funkcji.
Przedview Szybki przewodnik po VTech CS2050/CS2051/CS2052/CS2053
W niniejszym skróconym podręczniku użytkownika firmy VTech znajdują się podstawowe instrukcje dotyczące konfiguracji, informacje dotyczące bezpieczeństwa i wskazówki dotyczące obsługi modeli telefonów bezprzewodowych CS2050, CS2051, CS2052 i CS2053, obejmujące m.in. automatyczną sekretarkę i blokowanie połączeń.