1. Wprowadzenie
The Waveshare UGV02 is a versatile 6-wheel drive (6x4WD) mobile robot chassis designed for off-road applications. It features robust construction, excellent shock absorption, and an open-source architecture for extensive secondary development. This manual provides essential information for setting up, operating, and maintaining your UGV02 chassis.
Image: The Waveshare UGV02 6x4 Off-Road Mobile Robot Chassis, showcasing its robust design and wheels.
2. Zawartość opakowania
Sprawdź, czy w przesyłce znajdują się wszystkie wymienione poniżej elementy. Jeśli brakuje któregokolwiek z nich lub jest on uszkodzony, skontaktuj się z obsługą klienta.
Obraz: Ponadview of the UGV02 package contents, including the assembled UGV02 kit, accessories pack, power supply, USB cable, Picatinny rail, mounting plate, and camera holder.
- UGV02 Kit (assembled chassis)
- Pakiet akcesoriów
- Zasilacz 12.6V 2A
- Kabel USB
- Szyna Picatinny
- Płyta montażowa
- Uchwyt na kamerę
- Extension rails and ESP32 slave computer (as part of the kit)
3. Główne cechy
- 6 Wheels x 4WD Design: Provides strong power and increased ground contact for stability and load capacity.
- Możliwości terenowe: Flexible rubber tires and shock absorption system for complex terrains.
- Korpus aluminiowy o wysokiej wytrzymałości: Constructed from 2mm thick 5052 Aluminum Alloy for durability and protection.
- Multiple Host Computer Support: Compatible with Raspberry Pi, Jetson Nano, Jetson Orin Nano, etc., communicating via serial port with the ESP32 slave computer.
- ESP32 Slave Computer: Built-in multi-functional robot driver board with Wi-Fi and Bluetooth, supporting serial bus servos, PWM signal output, and TF card expansion.
- 3S UPS Power Supply Module: Supports 3 x 18650 Li batteries (not included) for uninterruptible power, charging, and simultaneous power output.
- Extension Rails: Includes 2 x 1020 European standard profile rails for installing additional peripherals.
- Open-Source Demos & Web Aplikacja: Facilitates secondary development and remote control.
- Multi-functional Mounting Plate: Allows installation of various peripherals like LIDAR, cameras, and other modules.
Image: Visual representation of the UGV02's key features, including full metal body, extension rails, 6 wheels x 4WD, ESP32 slave computer, 0.91" OLED, UART/I2C communication, open source, web app, 9-axis IMU, shock-absorbing tires, multi-host support, and multi-functional driver board.
4. Przewodnik konfiguracji
4.1 Instalacja zasilania
The UGV02 requires three 18650 Li-ion batteries (not included) for operation. These batteries are installed in the 3S UPS power supply module.
- Ensure the UGV02 is powered off.
- Znajdź komorę baterii na podwoziu.
- Insert three 18650 Li-ion batteries into the 3S UPS power supply module, ensuring correct polarity.
- Zabezpiecz pokrywę komory baterii.
- Connect the power supply module to the UGV02's charging port.
Image: Illustration of the 3S Lithium battery UPS power supply module, showing where three 18650 batteries (not included) are inserted. This module provides uninterruptible power and supports charging.
4.2 Host Computer Connection (Optional)
The UGV02 supports various host computers like Raspberry Pi, Jetson Nano, or Jetson Orin Nano. The host computer communicates with the onboard ESP32 slave computer via a serial port.
- Choose your desired host computer.
- Mount the host computer onto the UGV02 chassis using the provided mounting plate or extension rails.
- Connect the host computer to the ESP32 slave computer via the serial communication interface. Refer to the host computer's documentation for specific serial port configuration.
- If using Wi-Fi, connect the Wi-Fi antenna to the reserved interface on the UGV02.
Image: Depicts the UGV02 chassis with a multi-functional mounting plate, showing how various host computers like Jetson Orin Nano, Raspberry Pi 4B, and Raspberry Pi Zero can be connected. It also illustrates the mounting plate's design for peripherals like LIDAR and cameras.
4.3 Peripheral Installation (Optional)
The UGV02 comes with extension rails and a multi-functional mounting plate for adding peripherals.
- Extension Rails: Use the 1020 European standard profile rails to install additional modules. Boat nuts and M4 screws are included for secure attachment.
- Płyta montażowa: The multi-functional mounting plate allows for the installation of LIDAR (e.g., LD19, STL 27L), cameras, or other custom modules. Open-source DXF drawings and 3D models are available for secondary development.
Image: Shows the aluminum extension rails on the UGV02 and how additional peripherals can be mounted using boat nuts. It also highlights the Picatinny rail and M4 screws for accessory attachment.
5. Instrukcja obsługi
5.1 Włączanie/wyłączanie
Locate the Power ON/OFF switch on the UGV02 chassis. Press the switch to power on or power off the robot.
5.2 Basic Control via Web Aplikacja
The UGV02 features an open-source web application for remote control and monitoring.
- Power on the UGV02. If it is not connected to a known Wi-Fi network, it will automatically establish a hotspot.
- Connect your smartphone or computer to the UGV02's Wi-Fi hotspot.
- Otwórz web browser and navigate to the IP address provided by the UGV02 (usually displayed on the 0.91-inch OLED screen or found in the hotspot details).
- Ten web application interface will allow you to control the robot's movement, monitor voltage, heading angle, and other parameters.
Image: A smartphone screen displaying the UGV02's web application interface, showing controls for voltage, heading angle, and IP/MAC address. This interface allows for remote control and monitoring of the robot.
5.3 Advanced Control and Secondary Development
For advanced users, the UGV02's open-source nature allows for extensive customization and development.
- UART Communication: Send JSON commands via the web application or UART communication to control peripherals, configure serial bus servos, obtain servo feedback, and IMU information.
- Wyjście sygnału PWM: Control the angle of PWM servos.
- Wyświetlacz OLED: Modify the content displayed on the 0.91-inch OLED screen.
- Multi-functional Driver Board: The ESP32-based driver board can be used as a sub-controller, handling low-level computations, PID control for wheel speed, inverse kinematics for robotic arm linkages, and position interpolation. It also reads sensor data (9-axis IMU, INA219 battery voltage detection) and can independently stabilize camera vertical movement.
Image: Illustrates the UGV02 with a robotic arm and pan-tilt camera attached, demonstrating the use of serial bus servos and PWM servos. It also shows the slave computer driver board, highlighting its role in controlling various peripherals.
6. Konserwacja
- Czyszczenie: Regularly clean the chassis and wheels to remove dirt, dust, and debris, especially after off-road use. Use a soft, dry cloth. Avoid using harsh chemicals or excessive moisture.
- Pielęgnacja baterii:
- Ensure 18650 batteries are charged using the provided power supply.
- Nie przeładowuj ani nie rozładowuj akumulatorów zbyt mocno.
- Store the UGV02 with partially charged batteries if not in use for extended periods.
- Kontrola opon: Periodically check the flexible rubber tires for wear, tears, or damage. Replace if necessary to maintain optimal traction and shock absorption.
- Kontrola komponentów: Inspect all connections, screws, and mounted peripherals regularly to ensure they are secure.
- Aktualizacje oprogramowania: Sprawdź oficjalną stronę Waveshare website or community forums for any available firmware or software updates for the ESP32 slave computer or host computer.
7. Rozwiązywanie Problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| UGV does not power on. |
|
|
| Cannot connect to UGV via Wi-Fi. |
|
|
| Ruchy robota są chaotyczne i nie reagują na polecenia. |
|
|
8. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Model | UGV02 |
| Wymiary obrysu | Wymiary: 252 x 230 x 94 mm |
| Wysokość podwozia | 25 mm |
| Szerokość opony | 42 mm |
| Średnica opony | 80 mm |
| Liczba kół | 6 |
| Waga | 2 kg (chassis only) |
| Driving Payload | 4 kilogramów |
| Wsparcie baterii | 3 x 18650 Lithium batteries (in series, NOT included) |
| Czas ładowania | 1.5 godziny |
| Moc silnika | 5W x 4 |
| Upper Surface Area | 37864 mm² |
| Materiał opon | Nylon wheel hub, rubber tire |
| Rail Center Distance | 203 mm |
| Prędkość biegu | 0.05 - 1.3 m/s |
| Number of Driving Wheels | 4 |
| Materiał korpusu | 2mm (thickness) 5052 Aluminum Alloy |
| Vertical Obstacle Ability | 40 mm |
| Zdolność wspinaczkowa | 22° |
| Minimalny promień skrętu | 0 m (in-situ Rotation) |
| Żywotność baterii | 45 min (full power continuous output) |
| Funkcja zdalnego sterowania | WIFI AP/STA |
| Interfejs komunikacyjny | UART / serial bus servo interface / I2C |
Image: Technical drawing showing the dimensions of the UGV02 chassis in millimeters, including top, side, and front viewz kluczowymi pomiarami.
9. Gwarancja i wsparcie
Aby uzyskać informacje dotyczące gwarancji i pomocy technicznej, zapoznaj się z oficjalną stroną Waveshare webOdwiedź witrynę lub skontaktuj się bezpośrednio z działem obsługi klienta. Szczegóły dotyczące konkretnych okresów gwarancji i kanałów wsparcia są zazwyczaj podane w dokumentacji zakupu lub na stronie producenta. webstrona.
Producent: Udostępnianie fal
Numer modelu: UGV02
ASIN: B0C9QQQTDP
Aby uzyskać dalszą pomoc, możesz odwiedzić stronę Sklep Waveshare na Amazon.
