Instrukcja obsługi bezprzewodowego systemu mikrofonowego Pyle PDWM3100.5 UHF

Wstęp

The Pyle PDWM3100.5 UHF Wireless Microphone System provides clear sound reproduction for various applications. This system features a Bluetooth receiver with two rechargeable handheld microphones, offering flexibility and ease of use for home karaoke, classroom presentations, office meetings, and business applications. It incorporates advanced digital signal processing and infrared carrier-frequency synchronization for stable performance.

Główne cechy:

• UHF 2x100 Channel Receiver with Digital Signal Processor
• High-fidelity Cartridge Module for clear audio
• Infrared Carrier-frequency Synchronization for easy setup
• Unique ID Address and Super Anti-Jamming Circuit Design
• Super-low Background Noise and Frequency Auto-Search
• Two rechargeable handheld microphones with 1200mAh batteries
• Prosta obsługa Plug-and-Play

Co jest w pudełku

The Pyle PDWM3100.5 UHF Wireless Microphone System package includes the following components:

• Jednostka odbiorcza
• (2) Mikrofony ręczne
• Zasilacz (DC 12V, 1A)
• Connecting Line (39.37 inches)
• (4) Rechargeable Batteries (NI-MH Battery, 1200mAh)
• (2) Silicone Antiskid Rings
• (2) Anteny

Figure 1: All components included in the Pyle PDWM3100.5 UHF Wireless Microphone System package.

Produkt ponadview

Jednostka odbiorcza

Figure 2: Front panel features of the receiver unit.

1. Microphone Recharge Port: Insert microphones for recharging.
2. Wyświetlacz LCD: Shows system status, frequency, and battery levels.
3. Port podczerwieni: Infrared carrier-frequency synchronization.
4. MIC 1 Selector Buttons: Controls LCD screen and functions for Microphone 1.
5. Przycisk zasilania: Naciśnij, aby WŁĄCZYĆ / WYŁĄCZYĆ urządzenie.
6. MIC 2 Selector Buttons: Controls LCD screen and functions for Microphone 2.

Figure 3: Rear panel connections of the receiver unit.

7. Zasilanie: DC 12V, 1A input.
8. VOL-A, VOL-B: Volume controls for Microphone A and Microphone B.
9. MIXED Output: Combined audio output for both microphones.
10. Antenna A/B BNC Socket: Connect antennas for signal reception.

Mikrofon ręczny

Figure 4: Main functions of the handheld microphone.

• Głowica mikrofonu: Przechwytuje dźwięk.
• LCD Display Window: Shows channel and battery status.
• Port podczerwieni: Do synchronizacji z odbiornikiem.
• Przycisk zasilania: Włącza/wyłącza mikrofon.
• Dom Baterii: Compartment for rechargeable batteries.
• Pin ładujący: Connects to the receiver's recharge port for charging.

Instrukcje konfiguracji

1. Podłącz odbiornik:
   • Connect the two antennas to the Antenna A/B BNC Sockets on the rear panel of the receiver.
   • Connect the Power Adapter (DC 12V, 1A) to the Power Supply port on the receiver and plug it into a power outlet.
   • Connect the receiver's MIXED Output to your amplifier, stereo, audio processor, or DJ mixer using the provided connecting line.
   

   Figure 5: Receiver connectivity options.

2. Instalacja baterii mikrofonu:
   • Unscrew the bottom part of each handheld microphone to access the Battery House.
   • Insert the (2) provided NI-MH 1200mAh rechargeable batteries into each microphone, ensuring correct polarity.
   • Securely screw the bottom part back onto the microphone.
   

   Figure 6: Rechargeable microphones and intelligent charging.
3. Power On and Sync:
   • Press the Power Button on the receiver unit to turn it ON. The LCD display will illuminate.
   • Slide the Power Switch on each handheld microphone to the ON position. The microphone's LCD display will show its channel and battery status.
   • The microphones and receiver should automatically synchronize. If not, use the IR port on the receiver and the microphone's IR port to manually synchronize by aligning them and pressing the SYNC button on the receiver.
   

   Figure 7: UHF receiver range and microphone usage.

Instrukcja obsługi

1. Dostosuj głośność: Use the VOL-A and VOL-B knobs on the receiver's rear panel to adjust the individual volume levels of Microphone A and Microphone B.
2. Użycie mikrofonu: Hold the microphone approximately 2-6 inches from your mouth for optimal sound quality. Avoid covering the microphone head with your hand to prevent muffled sound.
3. Frequency Adjustment (if needed): If you experience interference, use the selector buttons on the receiver to enter the frequency adjustment mode. Follow the on-screen prompts to auto-search for a non-interference frequency.
4. Charging Microphones: When the microphone battery indicator is low, insert the microphone into the Microphone Recharge Port on the receiver. The receiver will intelligently charge the batteries. Charging time is approximately 10 hours for a full charge, providing over 7 hours of use.

Konserwacja

• Czyszczenie: Use a soft, dry cloth to clean the receiver and microphones. Do not use liquid cleaners or abrasive materials.
• Składowanie: Przechowuj system w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur, gdy nie jest używany.
• Pielęgnacja baterii: Ensure batteries are fully charged before extended storage. Remove batteries if the system will not be used for a long period to prevent leakage.
• Pielęgnacja anteny: Należy obchodzić się z antenami ostrożnie, aby ich nie wygiąć ani nie złamać.

Rozwiązywanie problemów

• Brak dźwięku:
  • Check if the receiver and microphones are powered ON.
  • Ensure microphones are synced with the receiver.
  • Verify volume levels on the receiver and connected audio device.
  • Check battery levels of microphones.
• Zakłócenia/słaba jakość dźwięku:
  • Change the operating frequency on the receiver and microphones.
  • Sprawdź, czy anteny są prawidłowo podłączone i ustawione.
  • Move away from other wireless devices or sources of electromagnetic interference.
  • Ensure microphones are within the specified operating range (164-262 ft).
• Mikrofon nie ładuje się:
  • Ensure microphones are correctly inserted into the recharge ports.
  • Verify the receiver is powered ON.
  • Check if batteries are properly installed in the microphones.

Specyfikacje

Gwarancja i wsparcie

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Pyle webstrona. Zachowaj dowód zakupu na potrzeby roszczeń gwarancyjnych.