1. Wprowadzenie
This manual provides comprehensive instructions for the setup, operation, and maintenance of your LEDLightsWorld RF Mini Wireless Remote Controller. This controller is designed for single color 3528, 5050, and 5630 LED strip lights, offering convenient wireless control over brightness and dynamic modes.
2. Informacje dotyczące bezpieczeństwa
- Upewnij się, że napięcie zasilaniatage matches the controller's working voltage (prąd stały 5-24 V).
- Do not expose the controller or remote to excessive moisture or extreme temperatures.
- Przed przystąpieniem do wykonywania jakichkolwiek podłączeń lub prac konserwacyjnych należy odłączyć zasilanie.
- Przechowywać w miejscu niedostępnym dla dzieci.
- Avoid short circuits during installation.
3. Zawartość opakowania
- 1 x RF Mini Wireless Remote Controller
- 1 x LED Strip Light Dimmer (Receiver)
- 1 x CR2 battery (included in remote)
4. Koniec produktuview
4.1. Pilot zdalnego sterowania
The 11-key RF wireless remote provides intuitive control over your LED strip lights. It features buttons for power, brightness adjustment, speed control, and dynamic modes.
Image: Diagram illustrating the functions of the 11-key RF wireless remote controller.
- Przycisk zasilania: Turns the LED strip lights ON/OFF.
- ŚWIATŁO: Green button to turn lights on.
- JASNY +/-: Dostosowuje poziom jasności.
- 100%, 50%, 25%: Quick selection for brightness levels.
- TRYB +/-: Cycles through dynamic lighting modes.
- SZYBKOŚĆ +/-: Adjusts the speed of dynamic modes.
4.2. LED Controller (Receiver)
The compact LED controller connects inline between your power supply and the LED strip. It receives signals from the RF remote to control the lights.
Image: The LED controller (receiver) with input and output wiring.
5. Konfiguracja
5.1. Podłączenie przewodów
Connect the LED controller between your DC 5-24V power supply and the single color LED strip lights. Ensure correct polarity (red wire to positive, black wire to negative).
Image: Wiring diagram for connecting the LED controller to a power supply and LED strip.
Aby zapoznać się z wizualną instrukcją instalacji, obejrzyj poniższy film:
Video: Demonstrates the installation and mode of use for the RF Mini Wireless Remote Controller.
5.2. Parowanie zdalne
The controller supports both 1-to-1 pairing (one remote controls one controller) and 1-to-many pairing (one remote controls multiple controllers). The product comes pre-paired for 1-to-1 control.
5.2.1. 1-to-1 Pairing (Default)
To pair one remote to one controller, ensuring it only controls that specific unit:
- Ensure the LED strip is powered OFF.
- Power ON the LED strip.
- Within 5 seconds of powering on, press the 'SPEED-' I 'SPEED+' buttons on the remote simultaneously.
- The light strip will flash, indicating successful 1-to-1 pairing.
Image: Visual guide for 1-to-1 remote pairing.
5.2.2. 1-to-Many Pairing
To pair one remote to multiple controllers, allowing it to control all of them simultaneously:
- Ensure the LED strips are powered OFF.
- Power ON all LED strips you wish to control with this remote.
- Within 5 seconds of powering on, press the 'ŚWIATŁO' przycisk na pilocie.
- All connected light strips will flash, indicating successful 1-to-many pairing.
For a visual guide on pairing multiple sets, please refer to the video below:
Video: Demonstrates how to pair the RF remote to control multiple LED strip lights.
6. Instrukcja obsługi
Once paired, use the remote control to manage your LED strip lights.
- Włączanie/wyłączanie zasilania: Press the red power button to turn the lights on or off.
- Regulacja jasności: Użyj JASNY+ I JASNY- buttons to increase or decrease brightness. You can also use the 100%, 50%, I 25% buttons for quick adjustments.
- Tryby dynamiczne: Naciskać TRYB+ or TRYB- to cycle through the 8 available dynamic modes.
- Kontrola prędkości: When in a dynamic mode, use PRĘDKOŚĆ+ or PRĘDKOŚĆ- to adjust the speed of the effect (10 levels available).
The controller features a smooth dimmer effect for seamless brightness transitions.
Video: Demonstrates the basic functions and operation of the 11-key RF Mini Wireless Remote Controller.
7. Konserwacja
- Keep the remote and controller clean and dry.
- Replace the CR2 battery in the remote when its performance degrades.
- Unikaj upuszczania urządzeń i narażania ich na silne uderzenia.
8. Rozwiązywanie Problemów
| Wydanie | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Oświetlenie nie reaguje na pilota. | Remote battery low or depleted. Incorrect pairing. Controller not powered. | Replace remote battery. Re-pair the remote and controller (see Section 5.2). Check power connections. |
| Lights flickering or unstable. | Loose connection. Insufficient power supply. | Check all wiring connections. Ensure power supply meets voltagi aktualnych wymagań. |
| Remote controls other lights nearby. | Multiple controllers paired to the same frequency (1-to-many). | Perform 1-to-1 pairing for each controller you wish to control individually (see Section 5.2.1). |
9. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Control LED Type | Single Color LED Strip Lights (3528, 5050, 5630) |
| Objętość roboczatage | DC 5-24V |
| Prąd wyjściowy | 6A (szczyt) |
| Typ pilota zdalnego sterowania | RF Wireless (11-key) |
| Tryby dynamiczne | 8 trybów |
| Dynamiczne poziomy prędkości | 10 poziomy |
| Lighting Brightness Levels | 10 poziomy |
| Płynny efekt ściemniacza | Tak |
| Zdalna częstotliwość | 433.92MHz |
| Odległość zdalna | >15m na otwartej przestrzeni |
| Zdalna bateria | Bateria 1 x CR2 (w zestawie) |
| Numer modelu przedmiotu | DC-RF-W-W-US |
10. Gwarancja i wsparcie
LEDLightsWorld products are designed for reliability and performance. For warranty information or technical support, please refer to the product packaging or contact LEDLightsWorld customer service directly. Keep your purchase receipt for warranty claims.
