Instrukcja obsługi pompy myjki ciśnieniowej TOOLCY 4400 PSI Triplex Plunger

1. Wprowadzenie

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your TOOLCY 4400 PSI Triplex Plunger Pressure Washer Pump. Please read all instructions carefully before use to ensure proper function and to prevent injury or damage.

Informacje dotyczące bezpieczeństwa

Always wear appropriate personal protective equipment (PPE) when operating pressure washing equipment, including eye protection, hearing protection, and gloves. Ensure the work area is clear of bystanders and pets. This pump is designed for COLD WATER use only.

2. Zawartość opakowania

Verify that all items listed below are included in your package. If any parts are missing or damaged, please contact TOOLCY customer support.

• 1x TOOLCY Triplex Plunger Pressure Washer Pump
• 1x Shaft Key
• 1x Oil Breather Plug (yellow)
• 4x śruby montażowe
• Washers for mounting bolts
• Chemical Injector Tube

Figure 2.1: Included components with the TOOLCY pressure washer pump.

3. Specyfikacje techniczne

Zgodność: This pump is compatible with various gas engines including Honda GX340, GX390, GX270; Simpson Armor 41114, 41096, 41115; Simpson Monster 41113, 41028, 41030, 41032, 41034; AAA 90039, 90038, 90034, DW3635; AR RKV3G27, RKV3G34, RKV4G36, RSV4G40, RKV3G39, RRV4G40HD, RG 2125HN, RG 1528HN, SLPHP4040-402; CAT 66DX40GG1, 66DX35G1I; and others like 3-0308, 3-0350, EXHP3640, EZ4040G, EZ4040, TS2021, WS202, DXPW3035, DXPW3535, DXPW4035.

4. Konfiguracja i instalacja

Follow these steps to properly install the TOOLCY pressure washer pump onto your gas engine.

4.1 Preparing the Engine

1. Upewnij się, że silnik jest wyłączony i ostygnięty.
2. Pull the recoil starter to rotate the engine shaft until the keyway is facing upward.
3. Insert the new shaft key (included with the pump) into the engine shaft keyway. A light coating of anti-seize compound on the engine shaft is recommended for easier future removal.

4.2 Montaż pompy

4. Align the keyway on the pump with the key on the engine shaft.
5. Carefully push the pump all the way onto the engine shaft until it is fully seated.
6. Obróć pompę, aż jej otwory montażowe pokryją się z mocowaniem bloku silnika.
7. Install the new bolts and tighten them securely and evenly to ensure there are no gaps.

Figure 4.2: Pump mounting dimensions for horizontal 1-inch shaft engines.

4.3 Oil Breather Plug Installation

8. Remove the red oil plug from the pump.
9. Install the yellow oil breather plug into the opening. This allows for proper ventilation during operation.

Figure 4.3: Oil sight glass and breather plug location.

4.4 Podłączanie węży

10. Connect a standard 3/4" garden hose to the pump's inlet. Ensure a tight connection to prevent leaks.
11. Connect your pressure washer hose to the 3/8" quick connect outlet.

5. Instrukcja obsługi

Once the pump is installed and hoses are connected, you can begin operation.

5.1 Regulacja ciśnienia

This pump features an adjustable unloader, allowing you to fine-tune the pressure output. Turn the unloader clockwise for increased pressure and counter-clockwise to reduce pressure. The final working pressure (PSI) depends on the output/horsepower of your gas engine and the nozzle used.

Figure 5.1: Adjusting pressure using the unloader valve.

5.2 Ogólne wskazówki dotyczące obsługi

• Always ensure a steady supply of cold water to the pump before starting the engine. Running the pump dry can cause severe damage.
• Use appropriate nozzles for the cleaning task. Different nozzles provide varying spray patterns and pressures.
• When not actively spraying, release the trigger to allow the unloader to bypass water, reducing strain on the pump and engine.
• This pump is suitable for residential and light commercial pressure washing tasks such as cleaning driveways, decks, fences, sidewalks, and vehicles.

Rysunek 5.2: Examples of cleaning applications for the pressure washer pump.

6. Konserwacja

Regular maintenance ensures the longevity and optimal performance of your pressure washer pump.

6.1 Oil Level Check and Replacement

• The pump comes with pre-filled oil. Before first use, check the oil level at the oil sight glass.
• The oil needs to be replaced every 50-60 hours of running time. Use 15W-40 oil.
• The sight glass helps you easily monitor the oil level and detect if water has clouded the oil, indicating a potential issue.

6.2 Przechowywanie

• Before storing, especially in freezing temperatures, ensure all water is drained from the pump and hoses to prevent damage.
• Store the pump in a dry, protected area.

7. Rozwiązywanie Problemów

W tej sekcji omówiono typowe problemy, jakie mogą wystąpić w przypadku pompy myjki ciśnieniowej.

7.1 Low Pressure Output

• Sprawdź dostawę wody: Ensure the garden hose is fully open and providing adequate water flow.
• Sprawdź dyszę: A clogged or worn nozzle can reduce pressure. Clean or replace as needed.
• Adjust Unloader: Turn the unloader clockwise to increase pressure.
• Powietrze w układzie: Run water through the pump with the engine off and trigger open to purge air before starting.

7.2 Wycieki wody

• Sprawdź połączenia: Ensure all hose connections are tight and properly sealed.
• Sprawdź pierścienie uszczelniające: Worn or damaged O-rings in quick connects or hose fittings can cause leaks. Replace if necessary.

7.3 Pump Not Engaging

• Engine Running: Confirm the gas engine is running correctly.
• Shaft Key: Ensure the shaft key is properly seated and the pump is fully engaged with the engine shaft.

8. Gwarancja i wsparcie

For warranty information, technical assistance, or to purchase replacement parts, please contact TOOLCY customer support. Refer to your product packaging or the official TOOLCY webna naszej stronie znajdziesz najnowsze dane kontaktowe.

Możesz również odwiedzić TOOLCY Store on Amazon aby uzyskać dodatkowe informacje i poznać więcej produktów.