Instrukcja obsługi ładowarki Lectron Level 2 EV

1. Koniec produktuview

The Lectron Level 2 EV Charger is designed for efficient and reliable charging of J1772 compatible electric vehicles. This portable charger delivers up to 240V and 40 Amps of input power, providing a 9.6 kW charging rate for fast charging at home or on the go. It features a NEMA 14-50 plug for direct connection to a 240V outlet and a 16-foot cable for flexible placement.

• Szybkie ładowanie: Up to 240V, 40 Amps, and 9.6 kW charging rate.
• Certyfikat bezpieczeństwa: ETL, FCC, and Energy Star certified with overvoltage, zabezpieczenie nadprądowe i przeciwzwarciowe.
• Trwała konstrukcja: Klasa odporności na kurz i wodę IP65.
• Przenośny: Long 16-foot cable for convenient use in various locations.
• Uniwersalna kompatybilność: Compatible with all J1772 standard EVs.
• Wskaźniki LED: For monitoring charging status and fault alerts.

2. Informacje dotyczące bezpieczeństwa

Please read all safety instructions carefully before using the Lectron Level 2 EV Charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Ensure the NEMA 14-50 outlet is properly installed and grounded by a qualified electrician.
• Nie używaj ładowarki, jeśli kabel lub złącze są uszkodzone.
• Nie zanurzaj ładowarki w wodzie ani innych płynach.
• Trzymaj dzieci i zwierzęta domowe z dala od obszaru ładowania.
• Avoid using extension cords with the charger.
• Operate the charger within its specified temperature range (-22°F to 122°F).

The Lectron Level 2 EV Charger is certified for safety and efficiency:

• ETL Certified (UL2594 standard): Zapewnia zgodność z północnoamerykańskimi normami bezpieczeństwa.
• Certyfikat FCC: Confirms electromagnetic compatibility.
• Certyfikat Energy Star: Oznacza efektywność energetyczną.
• Stopień ochrony IP65: Provides protection against dust ingress and low-pressure water jets.

3. Instrukcje konfiguracji

Setting up your Lectron Level 2 EV Charger is straightforward. Follow these steps for proper installation and initial use:

1. Wybierz lokalizację: Select a dry, well-ventilated area near a NEMA 14-50 outlet. Ensure the 16-foot cable can comfortably reach your vehicle's charging port without tension.
2. Montaż (opcjonalny): The charger comes with a mounting bracket. Securely attach the bracket to a wall stud or suitable surface using appropriate hardware (not included). Hang the charger control unit on the mounted bracket.
3. Podłącz do zasilania: Insert the NEMA 14-50 plug firmly into a dedicated 240V NEMA 14-50 outlet. The charger's "Power" LED indicator should illuminate, typically red, indicating it is receiving power.
4. Kontrola wstępna: Observe the LED indicator lights on the control unit. Refer to the "Operating Instructions" section for the meaning of each light.

4. Instrukcja obsługi

Once the charger is set up and connected to power, follow these steps to charge your electric vehicle:

1. Przygotuj swój pojazd: Ensure your vehicle is turned off and the charging port is accessible.
2. Połącz z pojazdem: Grasp the J1772 connector firmly and insert it into your vehicle's charging port. You should hear a click, indicating a secure connection.
3. Monitoruj stan ładowania: The LED indicator lights on the charger control unit will change to reflect the charging status.
   • Czerwona moc): Indicates the charger is powered on.
   • Green (Connect): Illuminates when the charger is successfully connected to the vehicle.
   • Blue (Charging): Blinks or stays solid blue when active charging is in progress.
   • Yellow (Fault): Indicates an error or fault condition. Refer to the Troubleshooting section.
4. Ładowanie zakończone: Once your vehicle's battery is fully charged, the charger will automatically stop charging. The "Charging" LED may turn off or change color depending on the vehicle's communication.
5. Odłączyć: Press the release button on the J1772 connector and carefully pull it out from your vehicle's charging port. Disconnect the NEMA 14-50 plug from the wall outlet if you intend to store the charger.

5. Konserwacja

Proper maintenance ensures the longevity and optimal performance of your Lectron Level 2 EV Charger.

Czyszczenie

• Always disconnect the charger from the power outlet before cleaning.
• Wipe the exterior of the charger and cables with a soft, damp płótno.
• Nie należy używać środków czyszczących o działaniu ściernym, rozpuszczalników ani silnych środków chemicznych.
• Ensure all components are dry before reconnecting to power.

Składowanie

• When not in use, store the charger in a dry, clean, and cool place.
• Coil the cable neatly to prevent kinks or damage.
• Utilize the provided carrying case for protection during transport or storage.

6. Rozwiązywanie Problemów

If you encounter issues with your Lectron Level 2 EV Charger, refer to the table below for common problems and solutions.

If the problem persists after attempting these solutions, please contact Lectron customer support for further assistance.

7. Specyfikacje

Detailed technical specifications for the Lectron Level 2 EV Charger:

8. Zgodność

The Lectron Level 2 EV Charger is designed to be universally compatible with all electric vehicles and plug-in hybrid vehicles that utilize the J1772 charging standard.

This includes, but is not limited to, vehicles from manufacturers such as:

• Mercedes
• BMW
• Bród
• Honda
• Hyundai
• Kia
• Porshe
• Nissan
• Pogoń
• Rivian
• Volkswagen

9. Gwarancja i wsparcie

Lectron products are manufactured with high-quality materials and undergo rigorous testing. This product is covered by a manufacturer's warranty against defects in materials and workmanship.

For warranty claims, technical support, or any inquiries regarding your Lectron Level 2 EV Charger, please visit the official Lectron webOdwiedź witrynę lub skontaktuj się z działem obsługi klienta. Zachowaj paragon jako dowód zakupu na potrzeby gwarancji.

Aby uzyskać więcej informacji, odwiedź stronę Lectron Store on Amazon.