Wstęp
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Viper 3306v Automotive Alarm System. This advanced security system is designed to protect your vehicle from theft and unauthorized access. Please read this manual thoroughly before attempting to install or operate the system.
The Viper 3306v system includes a control module, two 3-button remote controls, a programmable 6-tone siren, an LED indicator switch valet, and a dual impact shock sensor. It features an immobilizer ignition cut-off for enhanced security.
Zawartość opakowania
Przed rozpoczęciem instalacji należy sprawdzić, czy wszystkie komponenty są obecne:
- 1 x Viper Alarm Control Module
- 2 x 3-przyciskowe piloty zdalnego sterowania
- 1 x Programmable 6-Tone Siren (128 Db)
- 1 x LED Indicator Switch Valet
- 1 x Dual Impact Shock Sensor
- Wiązki przewodów
Image: Viper 3306v alarm system components, showing the main remote control with an LCD screen, a secondary remote, and the product box. The main remote features buttons for lock, unlock, auxiliary, and a star function.
Image: A collection of Viper 3306v alarm system components, including the large black siren, the main control module, one of the remote controls, and various colored wiring harnesses for installation.
Konfiguracja i instalacja
Installation of the Viper 3306v system requires technical knowledge of automotive electrical systems. It is highly recommended that installation be performed by a qualified professional.
Key Installation Steps (Professional Guidance Recommended):
- Umiejscowienie modułu sterującego: Securely mount the control module in a hidden, dry location within the vehicle, away from direct heat or moisture.
- Montaż syreny: Mount the siren in the engine bay, facing downwards to prevent water accumulation, and away from heat sources. Ensure it is securely fastened.
- Połączenia elektryczne: Connect the main wiring harness to the control module. Carefully follow the wiring diagram (not included in this manual, typically provided with the product) to connect to the vehicle's electrical system, including power, ground, ignition, door triggers, trunk trigger, and hood trigger.
- Immobilizer Ignition Cut-off: Integrate the immobilizer circuit into the vehicle's ignition system to prevent engine start when armed. This is a critical security feature.
- Regulacja czujnika wstrząsów: Mount the dual impact shock sensor securely. Adjust its sensitivity to detect impacts without causing false alarms.
- LED Indicator/Valet Switch: Install the LED indicator in a visible location on the dashboard and the valet switch in a discreet, accessible location.
- Parowanie pilota: Once the system is powered, pair the remote controls according to the specific instructions provided with the system.
Ważny: This system does not include remote engine start functionality.
Instrukcja obsługi
Using the Remote Controls:
The system comes with two 3-button remote controls. Specific button functions may vary slightly based on programming, but generally include:
- Przycisk blokujący (🔒): Press to arm the alarm system and lock the vehicle doors. The system will automatically activate 30 seconds after the last door is closed.
- Przycisk odblokowania (🔓): Press to disarm the alarm system and unlock the vehicle doors.
- Auxiliary/Trunk Release Button (often labeled AUX or a trunk icon): Press and hold to activate an auxiliary function, such as trunk release (if connected and programmed).
- Panic Button (often combined with Lock/Unlock or a separate button): Press and hold (or press multiple times) to trigger the alarm siren for emergency situations.
Uzbrojenie systemu:
- Ensure all doors, trunk, and hood are closed.
- Naciśnij Zamek przycisk na pilocie.
- The vehicle lights will flash, and the siren will chirp once to confirm arming. The doors will lock.
- The system will automatically arm 30 seconds after the last door is closed, even if the lock button is not pressed, providing an additional layer of security.
- The LED indicator will flash slowly, indicating the system is armed.
Rozbrajanie systemu:
- Naciśnij Odblokować przycisk na pilocie.
- The vehicle lights will flash twice, and the siren will chirp twice to confirm disarming. The doors will unlock.
- Wskaźnik LED zgaśnie.
Alarm Trigger and Immobilizer:
If the alarm is triggered (e.g., by door opening, impact, trunk/hood opening), the siren will sound at 128 Db, and the vehicle lights will flash. The immobilizer ignition cut-off will prevent the engine from starting, even with the correct key, until the system is disarmed.
Tryb parkingowy:
Valet mode allows you to temporarily disable the alarm system's security features (e.g., when servicing the vehicle). To enter/exit valet mode, typically:
- Przekręć kluczyk zapłonu do pozycji ON.
- Press and release the valet switch.
- The LED indicator will illuminate solid, indicating valet mode is active.
- Repeat the steps to exit valet mode. The LED will turn off.
Konserwacja
- Baterie do pilota zdalnego sterowania: Replace remote control batteries when the range decreases or the remote stops responding. Refer to the remote's specific instructions for battery type and replacement.
- Kontrola systemu: Periodically test the alarm system by intentionally triggering it (e.g., opening a door after arming) to ensure proper functionality.
- Czyszczenie: Keep the control module, siren, and sensors free from excessive dirt and moisture. Use a soft, dry cloth for cleaning.
- Kontrola okablowania: Annually inspect all wiring connections for corrosion or damage. Ensure all connections are secure.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Alarm nie uzbraja się/nie rozbraja. | Dead remote battery, remote out of range, system in valet mode, faulty wiring. | Replace remote battery. Move closer to vehicle. Exit valet mode. Check wiring connections (professional assistance recommended). |
| Fałszywe alarmy. | Shock sensor too sensitive, faulty sensor, loose wiring. | Adjust shock sensor sensitivity. Inspect sensors and wiring. |
| Syrena nie wydaje dźwięku. | Odłączona syrena, uszkodzona syrena, problem z okablowaniem. | Check siren connection. Test siren. Inspect wiring. |
| Vehicle does not start when alarm is disarmed. | Immobilizer issue, system still armed, faulty ignition cut-off. | Ensure system is fully disarmed. Check immobilizer wiring (professional assistance recommended). |
For persistent issues, contact a qualified automotive security technician.
Specyfikacje
- Model: Viper 3306v
- Marka: Viper (Generic listing)
- Siren Noise Level: 128 decybeli
- Piloty zdalnego sterowania: 2 x 3-button remotes included
- Cechy: Door, trunk, hood protection; impact sensor; immobilizer ignition cut-off; automatic arming.
- Zdalne uruchomienie silnika: Nie wliczone
- Wymiary opakowania: Wymiary 18.5 x 14.2 x 10.2 cm
- Waga paczki: 770 gramów
Gwarancja i wsparcie
Specific warranty information for the Viper 3306v system is typically provided by the retailer or manufacturer at the time of purchase. Please refer to your purchase documentation for details regarding warranty coverage and duration.
For technical support or service inquiries, it is recommended to contact the authorized dealer or installer from whom the product was purchased. They can provide specialized assistance for your Viper alarm system.
