1. Koniec produktuview
The ELEGANT Bifold Frameless Glass Shower Door is designed to provide a space-saving and modern solution for your bathroom. This model features a bifold pivot design, allowing the door panels to fold inward or outward for flexible access, making it ideal for smaller bathrooms or corner installations. It is constructed with 1/4 inch (6mm) clear tempered glass and finished with matte black hardware.
Image: The bifold shower door fully open, demonstrating the space-saving design.
2. Informacje dotyczące bezpieczeństwa
- Podczas instalacji zawsze noś okulary ochronne.
- Tempered glass, while strong, can shatter into small pieces if impacted at the edges. Handle with care.
- Ensure all screws and fasteners are securely tightened to prevent the door from becoming unstable.
- Professional installation is recommended, especially for individuals unfamiliar with shower door installations.
- Do not use abrasive cleaners or tools on glass or hardware, as this may damage the finish or glass surface.
3. Wymagane narzędzia
Do instalacji potrzebne są zazwyczaj następujące narzędzia:
- Wiertarka
- Młotek
- Silicone gun and sealant
- Śrubokręt (z główką Phillipsa)
- Taśma miernicza
- Ołówek lub marker
- Poziom
4. Lista części
Before beginning installation, verify that all parts are included as listed in your instruction manual. A general overview of components includes:
- Ściana profiles (vertical aluminum frames)
- Glass panels (tempered clear glass)
- Hinges and pivot hardware
- Water retaining strips and bars
- Magnetic sealing strips
- Uchwyty
- Screws, wall plugs, and screw covers
Image: Diagram illustrating the various components of the shower door.
5. Instrukcje instalacji
This section provides a general guide for installing the ELEGANT Bifold Frameless Glass Shower Door. For detailed visual instructions, please refer to the official installation video.
5.1. Prepare the Wall Profiles
- Ustaw ścianę profile (S01) on the wall, aligning it with your desired outside face and distance from the corner. Mark the drill points.
- Wywierć otwory w zaznaczonych punktach za pomocą wiertła o średnicy 6 mm.
- Insert wall plugs (S02) into the drilled holes using a hammer.
- Apply a generous bead of mold-resistant silicone caulk to the back of the wall profile where it will meet the tile wall. This creates a watertight seal and reinforces the mounting.
- Zamocuj ścienne profile to the wall with screws, ensuring it is level. Clean off any excess caulk immediately.
- Repeat the process for the wall profile po przeciwnej stronie.
- Allow the caulk to cure for at least 24 hours before proceeding with further installation steps.
5.2. Assemble Glass Panels
- Install water retaining strips (S06, S08, S09) along the bottom edge of the glass panels.
- Assemble the two glass panels using the folder hardware (S07). Ensure the hinges are correctly oriented for your desired door swing (inward or outward).
5.3. Mount the Door Assembly
- Carefully insert the assembled glass panel into the wall profile.
- Fix the panel to the wall profile with screws (S04, S05) and then put on the screw covers.
- Insert the magnetic profile (S15) into the wall profile.
- Install the bottom water retaining strips (S19) on the panel.
- Install the magnetic retaining strips (S10) on the panel.
- Install the bottom water retaining bar (S16, S17, S18).
- Install the decorative cover (S12, S13) on the wall profile.
- Install the handles (S20) on the panels.
5.4. Final Sealing
Add silicone sealant to the outside edge of the wall profiles and any other gaps to ensure a watertight seal. Allow 24 hours for the silicone to dry completely before using the shower.
5.5. Instrukcja wideo instalacji
For a visual step-by-step installation guide, please watch the official ELEGANT Bifold Shower Door Installation video:
Video: Official installation guide for the ELEGANT Bifold Shower Door, demonstrating each step from preparation to final sealing.
6. Instrukcja obsługi
The ELEGANT Bifold Frameless Glass Shower Door is designed for ease of use and space efficiency. The hinges and pivots allow for a 180-degree rotation, enabling the glass doors to be folded either inward or outward, depending on your preference and bathroom layout.
- To open the door, gently push or pull the handle to initiate the pivot and fold action.
- The door can fold completely into one piece, maximizing walk-in access and saving space outside the shower area.
- Ensure the magnetic strips engage fully when closing the door to maintain a secure seal.
Image: Visual representation of the door folding inward and outward.
7. Konserwacja
Proper maintenance will ensure the longevity and appearance of your shower door.
- Czyszczenie szkła: Clean glass panels regularly with a soft cloth and a non-abrasive glass cleaner. Avoid cleaners containing harsh chemicals, ammonia, or abrasive particles that can scratch the glass or damage protective coatings.
- Czyszczenie sprzętu: Wipe down matte black hardware with a soft, damp cloth. For stubborn spots, use a mild soap solution. Avoid abrasive cleaners or pads that can scratch or dull the finish.
- Konserwacja uszczelek: Periodically check the water retaining strips and magnetic seals for wear or damage. Replace them if they appear cracked, discolored, or no longer provide an effective seal.
- Smarowanie zawiasów: Jeśli zawiasy staną się sztywne, nałóż niewielką ilość smaru na bazie silikonu na punkty obrotowe.
8. Rozwiązywanie Problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Water leakage from bottom or sides | Improperly installed or worn water retaining strips/seals; insufficient caulking. | Ensure all seals are correctly seated. Reapply silicone caulk to exterior joints and gaps, allowing 24 hours to dry. Replace worn seals. |
| Door does not close securely | Misaligned magnetic strips; debris in the track. | Check alignment of magnetic strips and adjust if necessary. Clean any debris from the bottom track or magnetic strips. |
| Door feels stiff or difficult to open/close | Hinges require lubrication; misalignment. | Apply silicone-based lubricant to hinges. Check that the wall profiles are plumb and level; adjust if possible. |
| Door does not fit opening correctly | Measurement error; wall not plumb. | The door has an adjustable width range (31.5 to 33 inches). Ensure the wall profiles are installed to accommodate this range. If walls are significantly out of plumb, professional assistance may be required. |
9. Specyfikacje
- Marka: ELEGANCKI
- Numer modelu: BFH32-CO
- Wymiary produktu: 32 x 32 x 72 cali (szerokość x głębokość x wysokość)
- Regulowana szerokość: 31.5 to 33 inches (19mm adjustment on each side)
- Walk-in Opening: 26 cali
- Tworzywo: Bifold Pivot Door, 1/4" (6mm) Clear Tempered Glass
- Glass Certification: ANSI Z97.1 certified
- Wykończenie sprzętu: Matowa czerń
- Waga przedmiotu: 55 funtów
- Wymagany montaż: Tak
- Odwracalna instalacja: Yes (for right or left door opening)
Image: Detail of the width adjustment feature, showing up to 0.75 inches of adjustment on each side.
10. Gwarancja i wsparcie
ELEGANT products are designed for quality and durability. For any issues or support regarding your shower door, please refer to your purchase documentation for specific warranty details.
If you need help with online orders or have questions, please tap "Your Account" - "Order Detail" - "Message Center" on the platform where you made your purchase. You may also reach us through sunnyshowerusa@gmail.com.
