Wstęp
This manual provides detailed instructions for the installation, operation, and maintenance of your GE Appliances WR30X30972 Refrigerator Ice Maker. This genuine GE replacement part is designed to ensure reliable ice production for your compatible refrigerator model.
The ice maker includes the ice mold and the control device. It receives water from the water inlet valve, freezes it, and then automatically ejects the ice into the storage bin, refilling as needed until the bin is full.
Informacje dotyczące bezpieczeństwa
- Always unplug the refrigerator from the power source before attempting any installation, maintenance, or repair. Failure to do so can result in electrical shock or injury.
- Safely store any food that could deteriorate while the refrigerator power is off.
- Podczas montażu należy nosić odpowiedni sprzęt ochrony osobistej, np. rękawice.
- Jeśli masz jakiekolwiek wątpliwości, skonsultuj się z wykwalifikowanym technikiem sprzętu AGD.
Konfiguracja i instalacja
This section outlines the general steps for replacing or installing the WR30X30972 ice maker. Specific refrigerator models may have slight variations.
- Przygotuj lodówkę: Ensure the refrigerator is unplugged from the wall outlet. Remove all ice from the ice storage bin and any shelves or drawers that obstruct access to the ice maker compartment.
- Remove Old Ice Maker (if applicable):
Locate the existing ice maker. Typically, it is secured by one or more screws and connected by a power clip or wiring harness. Carefully disconnect the wiring harness and remove any mounting screws. Gently detach the old ice maker.
Image Description: This image shows the rear and underside of the ice maker, highlighting the electrical connector and the water fill tube. This view is helpful for understanding how the unit connects to the refrigerator's power and water supply.
- Zainstaluj nową kostkarkę do lodu:
Position the new WR30X30972 ice maker in the designated compartment. Align the mounting points with the screw holes in the refrigerator. Secure the ice maker with the appropriate screws.
Image Description: This image displays the GE WR30X30972 ice maker from the front and side, clearly showing the ice mold, the ejector mechanism, and the ON/OFF switch on the side of the control box. This is the primary view of the assembled unit.
- Connect Wiring and Water Line:
Connect the wiring harness from the refrigerator to the ice maker's electrical connector. Ensure a secure connection. If applicable, ensure the water fill tube is properly aligned with the ice maker's water inlet.
Image Description: A detailed close-up of the electrical connector for the ice maker, showing the pins and housing. This image is useful for verifying the correct connection during installation.
- Przywróć zasilanie: Once the ice maker is securely installed and all connections are made, plug the refrigerator back into the power outlet.
Instrukcja obsługi
The GE WR30X30972 ice maker operates automatically once installed and powered.
- Aktywacja: Ensure the ice maker's ON/OFF switch (located on the side of the control box) is in the "ON" position.
- Początkowa produkcja lodu: After installation, it may take several hours for the ice maker to produce its first batch of ice. Discard the first few batches of ice to ensure the system is clean.
- Działanie automatyczne: The ice maker will automatically fill the ice mold with water, freeze it, and then eject the ice into the ice storage bin. It will continue this cycle until the ice bin is full, at which point a sensor will temporarily halt production.
- Zatrzymanie produkcji lodu: To stop the ice maker from producing ice, move the ON/OFF switch to the "OFF" position.
Image Description: This image provides a side view of the ice maker, detailing the ice mold where water freezes and the ejector arm that pushes the formed ice cubes into the bin. This view helps illustrate the ice production mechanism.
Konserwacja
Regularna konserwacja pomaga zapewnić optymalną wydajność i długowieczność Twojej kostkarki do lodu.
- Czyszczenie pojemnika na lód: Periodically empty and clean the ice storage bin with mild soap and warm water. Rinse thoroughly and dry before returning it to the freezer.
- Filtr wody: If your refrigerator has a water filter, ensure it is replaced according to the manufacturer's recommendations to maintain water quality and prevent mineral buildup in the ice maker.
- Kontrola linii wodnej: Occasionally check the water supply line for any kinks, leaks, or damage.
Rozwiązywanie problemów
Refer to the following common issues and solutions before contacting service.
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Brak produkcji lodu |
|
|
| Ice freezing on ejector tray / Water overflow |
|
|
| Małe lub puste kostki lodu |
|
|
Specyfikacje
- Numer modelu: WR30X30972
- Marka: Sprzęt AGD GE
- Wymiary produktu: 13.25 x 4 x 10 cala
- Waga: 2.4 funtów
- Kompatybilne modele lodówek: GE GSH25JSTASS, GE GSL25JFPABS, GE GSL25JFTABS, GE GSS20IEMBWW, GE GTE19JSNRSS, GE HSS25GFPAWW
- Kod UPC: 084691856849
Informacje o gwarancji
The GE Appliances WR30X30972 Refrigerator Ice Maker comes with a limited one-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation provided with your original refrigerator or contact GE Appliances customer service.
Obsługa klienta
For further assistance, technical support, or to inquire about warranty claims, please contact GE Appliances customer service. You can find contact information on the official GE Appliances website or in your refrigerator's user manual.
Zasoby internetowe: GE Appliances Service & Support
