X-Sense Smart Carbon Monoxide Detector

Wstęp

The X-Sense Smart Carbon Monoxide Detector XC01-M is designed to provide reliable and accurate detection of carbon monoxide (CO) levels in your home. This device is an accessory for the FS51 smoke alarm kit and connects wirelessly to an SBS50 base station (not included) to offer smart features and enhanced safety. It utilizes an advanced electrochemical sensor for fast and accurate readings.

Key features include wireless interconnection with a long transmission distance, real-time push notifications to your smartphone via the X-Sense Home Security app, and a device sharing feature for family members. This manual provides essential information for proper setup, operation, and maintenance to ensure optimal performance and safety.

Zawartość opakowania

• 1 × CR123A Replaceable Battery (Packed with Equipment)
• 1 × Carbon Monoxide Alarm XC01-M
• 1 × Instrukcja obsługi
• 2 × Screws and Anchor Plugs

Produkt ponadview

The X-Sense Smart Carbon Monoxide Detector XC01-M is a compact, oval-shaped device, measuring 5.3 inches (13.5 cm) in length and 2.4 inches (6.3 cm) in width. It is powered by a replaceable CR123A battery, offering a 5-year battery life and a 10-year device lifespan. The front features an LCD display for CO levels, a test/silence button, and indicator lights for power, fault, and alarm status.

Zbliżenie view of the X-Sense Smart Carbon Monoxide Detector XC01-M, highlighting its sleek white design. The front panel includes an LCD screen displaying CO levels in PPM, a test/silence button, and LED indicators for power (green), fault (yellow), and alarm (red) states. Ventilation grilles are visible around the perimeter.

Konfiguracja i instalacja

1. Instalacja baterii

The XC01-M comes with a pre-installed CR123A Lithium Metal battery. To activate the device, remove the insulating pull tab from the battery compartment. The device will emit a short beep and the LCD display will light up, indicating it is powered on and ready for setup.

2. Opcje rozmieszczenia

The XC01-M offers versatile placement. It can be used as a freestanding unit on a flat surface or wall-mounted using the provided screws and anchor plugs. For optimal CO detection, place the detector in areas where CO is likely to accumulate, such as near fuel-burning appliances or in sleeping areas.

The X-Sense Smart Carbon Monoxide Detector XC01-M offers flexible placement options. It can be used as a freestanding unit on a flat surface, such as a countertop, or securely mounted to a wall using the provided hardware. Its compact design allows for discreet placement in various home environments.

3. App Connection (Requires X-Sense SBS50 Base Station)

The XC01-M connects to the X-Sense Home Security App via an SBS50 base station (sold separately). Ensure your base station is set up and connected to your 2.4 GHz Wi-Fi network (5.0 GHz is not supported).

1. Open the X-Sense Home Security App on your smartphone.
2. Tap the '+' icon in the upper right corner to add a new device.
3. Select 'Carbon Monoxide Alarms' and then choose 'ProConnected CO Alarms (Working with SBS50 Base Station)'.
4. Follow the on-screen prompts to add the XC01-M. This typically involves pressing the test/silence button on the detector twice quickly until the LED indicator flashes green.
5. The base station will announce 'Ready to add a device' and then 'Device added' upon successful pairing.
6. Once added, you can monitor the CO level, receive notifications, and manage settings directly from the app.

Diagram pokazujeasing the extensive wireless range of the X-Sense system, which can extend up to 1,700 feet (500 meters). The system supports the connection of up to 50 devices, including the XC01-M detector, to a central base station, ensuring wide coverage and comprehensive home security.

The X-Sense Home Security App provides real-time notifications for triggered alarms, such as a smoke alarm detected in the living room. The app interface displays connected devices, their locations, and options to locate or silence alarms, offering remote monitoring and control.

Działanie

1. Wskaźniki stanu

• Zielona dioda LED: Oznacza normalną pracę i zasilanie.
• Żółta dioda LED: Oznacza usterkę lub niski poziom naładowania baterii.
• Czerwona dioda LED: Indicates a CO alarm.

2. CO Alarm Levels & Response Times

The XC01-M is programmed to sound an alarm at the following CO concentrations within the specified timeframes:

• 70 str./min: Alarm within 60-240 minutes.
• 150 str./min: Alarm within 10-50 minutes.
• 400 str./min: Alarm within 4-15 minutes.

Note: As CO concentration increases, the alarm will activate faster. If an alarm is triggered, move to fresh air immediately and call 911.

The LCD display on the XC01-M detector shows the current CO level in parts per million (PPM). It also features a 'Peak CO' concentration memory, allowing users to view the highest CO level detected since the last reset or power cycle. This provides valuable information for monitoring potential CO hazards.

3. Remote Monitoring & Device Sharing

Through the X-Sense Home Security App, you can monitor CO levels from anywhere, receive real-time push notifications for alarms, low battery, and fault conditions. The app also allows you to share access to your home safety devices with family members, enabling them to check history, receive notifications, and silence devices.

The X-Sense Home Security App enables remote monitoring of the XC01-M Carbon Monoxide Detector. Users can check CO levels, receive alerts, and manage device settings from anywhere, allowing family members to stay informed about home safety.

Konserwacja

1. Wymiana baterii

The XC01-M uses a CR123A Lithium Metal battery. When the yellow LED flashes and the device beeps, it indicates a low battery. Replace the battery promptly to ensure continuous protection.

2. Regularne testy

Test the detector weekly by pressing the test/silence button on the device or through the X-Sense Home Security App. This verifies the unit's electronics and alarm functionality.

Rozwiązywanie problemów

• Yellow LED Flashing: Indicates a fault or low battery. Check the app for details or replace the battery.
• Red LED Flashing & Alarm Sounding: High CO levels detected. Immediately move to fresh air and call 911.
• Brak wyświetlacza/brak zasilania: Ensure the battery is correctly installed and fully charged. Replace if necessary.

Specyfikacje

Gwarancja i wsparcie

X-Sense offers a 60-day money-back guarantee, a 5-year quality warranty, and lifetime technical support for the XC01-M Carbon Monoxide Detector. For warranty claims or technical assistance, please refer to the contact information provided in your product packaging or visit the official X-Sense webstrona.