Keter Detroit XL Low Storage Cabinet

1. Wprowadzenie

Thank you for choosing the Keter Detroit XL Low Storage Cabinet. This manual provides essential information for the safe assembly, operation, and maintenance of your new storage unit. Please read these instructions carefully before beginning assembly and retain them for future reference.

The Keter Detroit XL Low Storage Unit is designed to provide a robust and organized storage solution for your home, garage, or shed. Its durable polypropylene construction ensures longevity, and the lockable doors offer enhanced security for your belongings.

2. Informacje dotyczące bezpieczeństwa

• Przeczytaj wszystkie instrukcje: Przed montażem i użyciem należy uważnie przeczytać i zrozumieć wszystkie instrukcje.
• Montaż: Assembly should be performed by at least two adults. Ensure all parts are present and undamaged before starting.
• Stabilność: For optimal firmness and to prevent the cabinet from tipping over, it is strongly recommended to fix the cabinet to a wall using appropriate fasteners (not included).
• Nośność: Each adjustable shelf has a maximum load capacity of 25 kg (55 lbs). Do not exceed this weight limit per shelf. Distribute weight evenly.
• Umieszczenie: Place the cabinet on a flat, level, and stable surface. Avoid placing it in direct, prolonged sunlight as this may affect the material over time.
• Mechanizm blokujący: The cabinet is designed to be lockable (lock not included). Use a suitable padlock for added security.
• Dzieci i zwierzęta: Keep children and pets away from the assembly area. Do not allow children to climb on or play inside the cabinet.
• Wentylacja: W przypadku przechowywania przedmiotów mogących wydzielać opary należy zapewnić odpowiednią wentylację.

3. Zawartość opakowania

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact Keter customer service for assistance.

• Cabinet Panels (sides, top, bottom, back)
• Drzwi szafkowe (2)
• Półki regulowane (2)
• Uchwyty (2)
• Assembly Hardware (screws, pins, connectors, etc.)
• Instrukcja montażu

4. Instalacja i montaż

Assembly of the Keter Detroit XL Low Storage Cabinet requires basic tools and approximately 30-60 minutes. Follow the steps outlined in the included assembly instructions carefully. It is recommended to assemble the unit on a soft, clean surface to prevent scratching.

Kroki montażu powyżejview:

1. Przygotuj obszar: Clear a spacious, level area for assembly. Unpack all components and verify against the parts list.
2. Złóż podstawę i boki: Connect the bottom panel to the side panels according to the diagrams in the separate assembly instructions.
3. Montaż paneli tylnych: Secure the polypropylene back panels into the grooves of the side and bottom panels.
4. Zamontuj panel górny: Zabezpiecz górny panel do zmontowanej konstrukcji.
5. Zainstaluj półki: Insert the adjustable shelves at your desired height. The shelves can be repositioned later as needed.
6. Zamontuj drzwi i klamki: Mount the cabinet doors to the main frame using the provided hinges. Attach the handles to the doors.
7. Mocowanie do ściany (zalecane): For maximum stability and safety, especially if storing heavy items or in areas with children, secure the cabinet to a wall using appropriate wall anchors and screws (not supplied). Locate wall studs if possible.

Rycina 4.1: Przód view of the assembled Keter Detroit XL Low Storage Cabinet.

Rysunek 4.2: Wnętrze view of the cabinet with doors open, highlighting the two adjustable shelves.

Rysunek 4.3: Przekrój wymiarowyview of the Keter Detroit XL Low Storage Cabinet (Height: 93cm, Depth: 54cm, Width: 89cm).

5. Obsługa i użytkowanie

• Ładowanie szafki: Place heavier items on the bottom shelf to improve stability. Distribute weight evenly across shelves. Do not exceed the 25 kg (55 lbs) weight limit per shelf.
• Regulacja półek: The shelves are height adjustable. To reposition a shelf, carefully remove all items, lift the shelf, and reinsert it into the desired slots on the side panels.
• Mechanizm blokujący: The cabinet features a provision for a padlock (not included) to secure the doors. Align the holes on the doors and insert a padlock for security.
• Działanie drzwi: Ensure doors open and close smoothly. Do not force them if they stick; check for obstructions or alignment issues.

6. Konserwacja

• Czyszczenie: Clean the cabinet regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the polypropylene material.
• Kontrola: Periodically inspect the cabinet for any signs of wear, damage, or loose connections. Ensure the wall mounting (if used) remains secure.
• Warunki środowiskowe: While durable, extreme temperatures or prolonged exposure to direct sunlight may affect the material over time. Store in a shaded or protected area if possible.

7. Rozwiązywanie Problemów

8. Specyfikacje

9. Gwarancja i wsparcie

Keter products are manufactured to high quality standards. For information regarding warranty coverage, product support, or to order replacement parts, please refer to the contact information provided with your purchase documentation or visit the official Keter webstrona.

Proszę mieć przy sobie numer modelu (249803) and date of purchase ready when contacting support.