Instrukcja obsługi timera do węża ogrodowego RAINPOINT WiFi

Wstęp

Thank you for choosing the RAINPOINT WiFi Hose Timer. This smart water timer system is designed to simplify your garden and drip irrigation, offering automatic and manual watering options, Wi-Fi hub connectivity, and voice control via Alexa. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.

Główne cechy

• Anytime, Anywhere Watering: Control your watering plans remotely via your smartphone, allowing you to change, stop, or run programs from any location.
• Inteligentne sterowanie głosem: Integrate with Alexa for hands-free watering commands.
• Dual Zone with Multiple Programs: Each of the two zones supports up to three separate watering plans per day, with customizable start times, durations, and frequencies.
• Real-Time Water Consumption Monitoring: A built-in flow meter tracks water usage, providing historical data in gallons or liters to help optimize water-saving efforts.
• Rain Delay and App Notifications: Manually activate rain delay for 24/48/72 hours, or enable automatic delay synchronization with weather apps. Receive app notifications for watering status.
• Multifunctional Smart Wi-Fi Hub: The included hub connects up to four watering timers and features a smart plug for remote control. It maintains stable signal up to 328ft from the timer.
• Irrigation & Mist Modes: Both modes offer customizable start times, durations (1 min - 11h 59min), and watering frequencies (specific day or everyday).

Zawartość opakowania

Przed przystąpieniem do instalacji należy upewnić się, że wszystkie komponenty są obecne:

• RAINPOINT WiFi Hose Timer (1 unit)
• Wi-Fi Hub (1 unit)
• Teflon Tape (for sealing connections)
• Instrukcja obsługi (ten dokument)

Notatka: The timer requires 2 AA alkaline batteries (not included). Ensure to use new, high-quality batteries for optimal performance.

Przewodnik po konfiguracji

1. Instalacja baterii

Proper battery installation is crucial for the timer's functionality.

1. Znajdź komorę baterii z tyłu timera.
2. Otwórz pokrywę komory baterii.
3. Insert 2 brand new AA alkaline batteries, ensuring correct polarity (+/-).
4. Securely close the battery compartment cover. Ensure your hands are dry during this process.

2. Instalacja fizyczna

Attach the timer to your outdoor faucet.

1. Ensure your faucet is clean and free of debris.
2. Screw the timer onto your outdoor faucet. Hand-tighten only. Use the provided Teflon tape for a watertight seal if necessary.
3. Connect your garden hose or drip irrigation system to the outlets of the timer.

3. App Setup & Wi-Fi Hub Connection

Connect your Wi-Fi Hub and timer to the RainPoint App for smart control.

1. Download and open the RainPoint App (or Tuya App) from your device's app store.
2. Utwórz konto lub zaloguj się.
3. Plug in the Wi-Fi Hub to a power outlet.
4. In the app, click the "+" button (or "Add Device") and select "Socket (Wi-Fi)" to add the hub.
5. Enter your 2.4GHz Wi-Fi password. (Note: 5GHz Wi-Fi is not supported).
6. Follow the app's instructions to reset the hub (long press button until light blinks quickly) and connect it.
7. Once the hub is connected, select it in the app and click "Manage added devices".
8. Find and click on "Water valve controller" to add your hose timer.
9. On the hose timer, long press the left button (or both buttons for some models) for 5 seconds until the indicator flashes rapidly to enter distribution mode.
10. Follow the app's guide to complete the pairing process.

4. Ustawianie zegara

Set the current time on your timer.

1. Ustaw pokrętło na „USTAW ZEGAR”.
2. Press the "+/-" buttons to adjust the current time.
3. Press the "OK" button to switch between hour and minute settings.
4. Obróć pokrętło, aby zapisać zmiany.

Instrukcja obsługi

This section details how to program and operate your RAINPOINT WiFi Hose Timer.

1. Ustawianie czasu rozpoczęcia

Program when your watering cycle should begin.

1. Turn the dial to "START TIME".
2. Press the "+/-" buttons to set the desired start time.
3. Press the "OK" button to switch between hour and minute settings.
4. Obróć pokrętło, aby zapisać zmiany.

2. Setting Watering Duration (How Long)

Define how long each watering cycle will last.

1. Turn the dial to "HOW LONG".
2. Press the "+/-" buttons to set the watering duration (1 minute to 240 minutes).
3. Obróć pokrętło, aby zapisać zmiany.

3. Setting Watering Frequency (How Often)

Determine how often your watering cycles will repeat.

1. Turn the dial to "HOW OFTEN".
2. Press the "+/-" buttons to set the watering frequency (e.g., every 1 hour to 12 hours, or every 1 day to 7 days).
3. Obróć pokrętło, aby zapisać zmiany.

4. Automatic Watering

Once programmed, the timer will operate automatically.

1. Turn the dial to "AUTO" to start the programmed watering schedule.
2. When watering is ON, the LCD screen displays the remaining time of the current watering program.
3. When watering is OFF, the LCD screen flashes between the next watering start time and the current time.

5. Podlewanie ręczne

Initiate watering instantly without affecting your programmed schedule.

1. With the dial at "AUTO" and the timer not in Rain Delay mode, press the "MANUAL" button.
2. Press the "+/-" buttons to select the desired watering duration (1 minute to 240 minutes).
3. Press the "OK" button to start manual watering.
4. Manual watering starts, and the LCD screen displays the remaining time.
5. To cancel manual watering, turn the dial to "OFF" and then back to "AUTO".

6. Opóźnienie z powodu deszczu

Pause your watering schedule for a set period due to rain or other reasons.

1. With the dial at "AUTO", long press the "DELAY" button for 3 seconds.
2. Press the "+/-" buttons to select a delay of 24, 48, or 72 hours. Press "OK" to confirm.
3. Rain delay starts, and the LCD screen displays the remaining time before the preset program resumes.
4. To cancel rain delay, long press the "DELAY" button for 3 seconds with the dial at "AUTO".

7. Sterowanie głosowe za pomocą Alexy

Control your timer using voice commands through Amazon Alexa.

1. Ensure your Wi-Fi Hub and Timer are successfully connected to the RainPoint App.
2. Otwórz aplikację Amazon Alexa na swoim smartfonie.
3. Navigate to "Skills & Games" (usually under the "More" tab).
4. Szukaj "Tuya Smart" (or "RainPoint" if available as a direct skill) and enable the skill.
5. Link your Tuya Smart account with your Amazon Alexa account.
6. Once linked, Alexa will discover your devices. You can rename your watering zones (e.g., "Left Water Timer", "Right Water Timer") in the Alexa app for easier voice commands.
7. You can now use voice commands like: "Alexa, open the Left Water Timer." or "Alexa, turn on the Right Water Timer."

8. Water Consumption Monitoring

Track your water usage directly from the app.

• The built-in water flow meter records how much water is used.
• View detailed reports and historical data in gallons or liters within the RainPoint App.
• Use this data to adjust your watering plans and conserve water.

Konserwacja

1. Czyszczenie filtra

Regularnie czyść filtr, aby zapobiec zatorom i zapewnić prawidłowy przepływ wody.

1. Zakręć dopływ wody do kranu.
2. Odkręć timer od kranu.
3. Carefully remove the filter screen from the inlet.
4. Rinse the filter screen under running water to remove any debris or sediment.
5. Załóż ponownie czysty filtr i zamontuj timer na kranie.

Rozwiązywanie problemów

1. Wyciek wody

If you experience water leakage from the timer connections:

• Sprawdź filtr: A clogged filter can sometimes cause back pressure leading to leaks. Clean the filter as described in the Maintenance section.
• Dokręć połączenia: Ensure all connections (faucet to timer, hose to timer) are hand-tight. Do not overtighten.
• Check Washers: Ensure rubber washers are properly seated and not damaged. Replace if necessary.
• Use Teflon Tape: Apply Teflon tape to the threads of the faucet connection for an improved seal.

Specyfikacje

Gwarancja i wsparcie

RAINPOINT products are designed for durability and performance. For warranty information, technical support, or any inquiries, please refer to the contact details provided on the product packaging or the official RAINPOINT website. You can also reach out via email or live chat for assistance.