Instrukcja obsługi mostu Vonets VAP11S-5G Mini WiFi

1. Wprowadzenie

The Vonets VAP11S-5G is a versatile industrial-grade Mini WiFi Bridge, Repeater, and Router designed for stable and reliable wireless networking. It supports the WiFi 802.11a/n/ac protocol with a 900Mbps WiFi rate, enabling both WiFi-to-wired and wired-to-WiFi functionalities. This device is suitable for various applications including surveillance, DVR, IP cameras, medical equipment, IoT devices, video transmission, industrial PLC, and more.

This manual provides detailed instructions for setting up, operating, and maintaining your VAP11S-5G device.

2. Informacje dotyczące bezpieczeństwa

• Ensure the device is powered by a DC5-24V power supply (typical 5V/2A).
• Unikaj narażania urządzenia na działanie ekstremalnych temperatur i wilgoci.
• Nie rozmontowuj ani nie próbuj samodzielnie naprawiać urządzenia. W celu uzyskania pomocy skontaktuj się z wykwalifikowanym personelem.
• Trzymaj urządzenie z dala od wody i innych płynów.
• Aby zapobiec przegrzaniu, należy zapewnić odpowiednią wentylację.

3. Zawartość opakowania

Proszę sprawdzić, czy w paczce znajdują się następujące elementy:

• Vonets VAP11S-5G Mini WiFi Bridge
• 2 anteny 5 GHz
• Kabel zasilający USB
• Kabel Ethernet
• Industrial DC Connector
• Naprawiony zestaw
• Szybki przewodnik po ustawieniach

4. Koniec produktuview

The Vonets VAP11S-5G features a compact design with two external antennas for enhanced signal reception. It includes two RJ45 ports for wired connections and can be powered via USB or DC input.

This image displays the Vonets VAP11S-5G device, a compact white unit with two external antennas. It is shown connected to a USB power cable and an Ethernet cable, highlighting its connectivity options.

4.1. Komponenty i wskaźniki

This diagram illustrates the key components of the VAP11S-5G. It shows the LAN/WAN port, USB (5V-2A) power input, DC (5V-24V) power input, and a reset button. LED indicators are also labeled: Green Light for 5G WiFi connection status, Yellow Light for Ethernet cable connection status, and Blue Light for System Status.

• Port LAN/WAN: For Ethernet cable connection.
• USB (5V-2A): Primary power input option.
• DC (5V-24V): Alternative power input option, suitable for industrial applications.
• Przycisk resetowania: Służy do przywracania ustawień fabrycznych.
• Wskaźniki LED:
  • Zielone światło: Indicates 5G WiFi connection status.
  • Żółte światło: Indicates Ethernet cable connection status.
  • Niebieskie światło: Indicates System Status.

5. Konfiguracja

5.1. Instalacja sprzętu

1. Instalacja anten: Screw the two 5GHz antennas onto the device. For optimal WiFi signal, ensure the antennas are positioned at a 90-degree angle.
2. Włącz urządzenie: Connect the device to a power source using either the USB cable (5V/2A recommended) or the DC connector (5V-24V).
3. Połączenie przewodowe: Connect the device to your computer or network device using an Ethernet cable.

This image illustrates the flexible power options for the VAP11S-5G, including USB power supply (5V 2A recommended), industrial wiring head support, and standard DC power supply (supporting wide voltage DC5-24V).

5.2. Initial Configuration (Computer)

To configure the VAP11S-5G using a computer, follow these steps:

1. Ensure the device is powered on and connected to your computer via Ethernet.
2. Otwórz web przeglądarki na Twoim komputerze.
3. Enter the configured domain http://vonets.cfg or the IP address 192.168.254.254 into the address bar and press Enter.
4. Log in using the default User ID and password, both typically "admin".
5. Navigate to the WiFi Hotspots section and click "Scan Hotspots" to find available networks.
6. Select your desired WiFi network (hotspot) from the list and click "Next".
7. Enter the password for your chosen WiFi hotspot.
8. Click "Apply" and then "Reboot" to save the settings and restart the device. The device will take approximately 1 minute to reboot. Wait until the LED lights flash normally.

5.3. Initial Configuration (Smartphone)

You can also configure the VAP11S-5G using a smartphone:

1. Power on the VAP11S-5G device.
2. On your smartphone, go to WiFi settings and connect to the device's default SSID (e.g., VONETS_5G_XXXXX). The default password is 12345678.
3. Otwórz web Przeglądarka na Twoim smartfonie.
4. Wchodzić http://vonets.cfg or 192.168.254.254 into the address bar.
5. Log in with the default User ID and password ("admin").
6. Scan for WiFi hotspots and select your desired network.
7. Wprowadź hasło do swojej sieci Wi-Fi.
8. Apply the settings and reboot the device.
9. After reboot, connect your smartphone to the newly configured WiFi network (the SSID will be the source WiFi SSID_5G_**). The password will be the same as your source WiFi's password.

6. Tryby pracy

The VAP11S-5G supports multiple operating modes to suit various networking needs:

This image displays three primary application modes: Repeater/Bridge, AP (Access Point), and Router. Each diagram shows how the VAP11S-5G (VAP11AC with fan version) integrates into different network setups to expand WiFi coverage, convert WiFi to wired, or provide internet access.

6.1. Repeater/Bridge Application

This mode expands an existing WiFi network, converting WiFi to an RJ45 network cable. It allows devices like desktop computers, printers, surveillance cameras, and attendance machines to connect to the network wirelessly.

6.2. AP (Access Point) Application

In AP mode, the device functions as a wireless access point for a wired network. It is suitable for scenarios where a network cable is connected to the computer, allowing other wireless devices to access the internet without dialing.

6.3. Tryb routera

This mode implements a wireless access function for dial-up access, suitable for scenes that require such access.

7. Zaawansowane funkcje

This image presents a grid detailing several advanced features of the VAP11S-5G, including automatic overvoltage protection, IP/MAC layer transparent transmission, SSA signal strength detection, WiFi motion detection, 5GHz band transmit power, manual WiFi hotspot control, wide operating temperature range, batch configuration, and support for multiple wireless terminal devices.

• Automatic Overvoltage Ochrona: Features two-level automatic overvoltage protection with an upper limit of 27V, enhancing durability for industrial applications.
• IP/MAC Layer Transparent Transmission: Compatible with various surveillance systems (e.g., GoPro, Hikvision, Cisco WiFi) for diverse application needs.
• SSA Signal Strength Detection Reporting: Achieves WiFi motion detection and positioning for specialized applications.
• WiFi Motion Detection: Suitable for dynamic WiFi access in intelligent robots.
• 5GHz Band 19/23dBm Transmit Power: Offers adjustable transmit power for optimal performance, with a measured 500m barrier-free transmission range.
• WiFi Hotspots Can Be Manually Turned Off: Provides flexibility for bridge or repeater applications.
• Szeroki zakres temperatur pracy: Supports working environments from -40°C to 50°C, making it suitable for industrial use.
• Batch Configuration: Facilitates easier setup for multiple devices in industrial applications.
• Wireless Terminal Equipment X20: Obsługuje jednoczesne podłączenie ponad 20 urządzeń końcowych WiFi.

8. Konserwacja

• Aktualizacje oprogramowania: The device's software is continuously optimized. You can upgrade the software version online at any time to ensure optimal functionality. Refer to the official Vonets webwitryna zawierająca najnowsze oprogramowanie sprzętowe i instrukcje.
• Czyszczenie: Do czyszczenia urządzenia należy używać miękkiej, suchej ściereczki. Nie należy używać płynów czyszczących ani aerozoli.
• Rozpraszanie ciepła: The device includes a smart automatic cooling fan that activates after 5-10 minutes of normal operation to ensure stable performance. Ensure the vents are not obstructed.

9. Rozwiązywanie Problemów

• Urządzenie nie włącza się: Ensure the power cable is securely connected and the power source is active. Try a different USB port or DC adapter if available.
• Nie można uzyskać dostępu Web Interfejs:
  • Verify the Ethernet cable connection between the device and your computer.
  • Ensure your computer's network adapter is set to obtain an IP address automatically (DHCP).
  • Sprawdź jeszcze raz URL (http://vonets.cfg) or IP address (192.168.254.254).
  • Wyczyść pamięć podręczną przeglądarki lub spróbuj użyć innej przeglądarki.
• No Internet Connection After Configuration:
  • Confirm that the WiFi hotspot password entered during configuration is correct.
  • Ensure the source WiFi network is active and providing internet access.
  • Reboot the VAP11S-5G device and your main router.
• Unstable Connection / Frequent Disconnections:
  • Check the signal strength of the source WiFi network. If it's less than 50%, the network may be unstable.
  • Adjust the angle of the VAP11S-5G antennas to optimize signal reception.
  • Ensure the device is not placed near sources of interference (e.g., microwaves, cordless phones).
  • Consider updating the device firmware to the latest version.
• LED Lights Not Functioning as Expected: Refer to the "Components and Indicators" section for expected LED behavior. If lights are not as described, try rebooting the device.

10. Specyfikacje

11. Gwarancja

Produkt objęty jest roczną gwarancją od daty zakupu. Prosimy zachować dowód zakupu na wypadek roszczeń gwarancyjnych.

12. Wsparcie

For further assistance or technical support, please contact Vonets customer service:

• E-mail: support@vonets.com
• Webstrona: Odwiedź Vonets Store on Amazon Aby uzyskać informacje o produkcie i jego aktualizacjach.