1. Wprowadzenie
The DVDO 1x4 HDMI Splitter with HDR is designed to distribute a single HDMI input signal to four separate HDMI outputs simultaneously. This device supports resolutions up to 4K@60Hz with 4:4:4 chroma subsampling, ensuring high-quality video transmission. It is fully compliant with HDMI 2.0b and HDCP 2.2 specifications, making it compatible with the latest audio and video standards. A built-in scaler allows individual outputs to automatically scale down to 1080P if connected to displays with lower resolution capabilities, providing an optimal signal for each attached display.
2. Funkcje
- HDMI Splitter 1 in 4 out: Distributes one HDMI input signal to four HDMI displays while maintaining signal quality.
- Wysoka przepustowość: Compliant with HDMI 2.0b and HDCP 2.2 with 18Gbps bandwidth.
- Advanced Audio Support: Fully supports audio formats in HDMI 2.0 specification, including PCM, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, and DTS:X.
- Individual Output Scaling: Each HDMI output supports scaling down to 1080P individually (frame rate remains unchanged when scaling from 4K to 1080P).
- Regeneracja sygnału: Features automatic input cable equalization for signal regeneration compensation.
- HDR and 3D Support: Supports High Dynamic Range (HDR) and 3D content.
3. Zawartość opakowania
Please verify that all items listed below are included in your package. If any items are missing or damaged, please contact DVDO customer support.
Image: The DVDO 1x4 HDMI Splitter with its power adapter and various international plug adapters, along with mounting brackets.
- DVDO 1x4 HDMI Splitter Unit
- Zasilacz 5V DC
- Wsporniki montażowe (2)
- Śruby montażowe
- Instrukcja obsługi (ten dokument)
4. Konfiguracja i instalacja
Follow these steps to properly set up your DVDO 1x4 HDMI Splitter:
Image: Connection diagram illustrating how to connect a source device (e.g., Blu-ray Player) to the HDMI IN port and multiple display devices to the HDMI OUT ports.
- Wyłącz urządzenia: Ensure all source devices (e.g., Blu-ray player, gaming console) and display devices (e.g., TV, projector) are powered off before making connections.
- Połącz źródło: Connect an HDMI cable from your source device's HDMI output to the HDMI IN port on the DVDO 1x4 HDMI Splitter.
- Podłącz wyświetlacze: Podłącz kable HDMI z HDMI OUT 1, 2, 3, and 4 ports on the splitter to the HDMI inputs of your respective display devices.
- Podłącz zasilanie: Plug the included 5V DC power adapter into the Prąd stały 5 V port on the splitter, then plug the adapter into a standard electrical outlet.
- Włączanie: Power on your display devices first, then your source device, and finally the DVDO 1x4 HDMI Splitter. The splitter will automatically detect the input signal and distribute it to all connected displays.
5. Instrukcja obsługi
The DVDO 1x4 HDMI Splitter is designed for plug-and-play operation. Once all connections are made and power is supplied, the unit will automatically detect the input signal and replicate it across all four outputs.
Obraz: Zbliżenie view of the front panel of the DVDO 1x4 HDMI Splitter, highlighting the HDMI IN port and the four HDMI OUT ports.
- Dystrybucja sygnału: The splitter will mirror the input signal to all four connected displays.
- Automatic Scaling: If a connected display has a lower resolution than the source, the splitter will automatically scale down the signal for that specific output to ensure compatibility (e.g., 4K input to 1080P output).
- Wskaźniki LED: The unit may feature LED indicators for power and active HDMI connections. Refer to the device itself for specific indicator locations and meanings.
6. Konserwacja
To ensure optimal performance and longevity of your DVDO 1x4 HDMI Splitter, follow these simple maintenance guidelines:
- Czyszczenie: Do czyszczenia zewnętrznej części urządzenia należy używać miękkiej, suchej ściereczki. Nie należy używać płynnych środków czyszczących ani aerozoli.
- Wentylacja: Upewnij się, że urządzenie znajduje się w dobrze wentylowanym pomieszczeniu, aby zapobiec przegrzaniu. Nie blokuj żadnych otworów wentylacyjnych.
- Środowisko: Keep the splitter away from direct sunlight, heat sources, and excessive moisture.
- Zarządzanie kablami: Ensure HDMI cables are not excessively bent or strained, as this can affect signal quality.
- Odłączenie zasilania: Jeżeli urządzenie nie będzie używane przez dłuższy czas, należy odłączyć je od gniazdka zasilania.
7. Rozwiązywanie Problemów
If you encounter issues with your DVDO 1x4 HDMI Splitter, please refer to the following table for common problems and solutions:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Brak obrazu na wyświetlaczu(ach) | No power to splitter; Loose HDMI cables; Incorrect input selected on TV; HDCP issue. | Check power connection and adapter. Ensure all HDMI cables are securely connected. Select the correct HDMI input on your display. Power cycle all devices (source, splitter, displays). |
| Picture flickering or intermittent signal | Poor quality HDMI cables; Cable length too long; Signal interference. | Use high-quality, certified HDMI 2.0b cables. Try shorter HDMI cables if possible. Ensure cables are not near strong electrical interference sources. |
| Brak dźwięku | Audio format not supported by display; Loose HDMI cable. | Verify your display supports the audio format being sent. Check HDMI cable connections. |
| One display works, others do not | Faulty HDMI cable to specific display; Display compatibility issue. | Swap HDMI cables to isolate the issue. Check if the non-working display supports the resolution/refresh rate. Try connecting only the problematic display to an output. |
| 4K signal not displayed correctly | Display does not support 4K@60Hz 4:4:4; HDMI cable not rated for 4K. | Ensure your display supports the full 4K@60Hz 4:4:4 specification. Use Premium High-Speed HDMI cables. |
If the problem persists after trying these solutions, please contact DVDO customer support for further assistance.
8. Specyfikacje
Detailed technical specifications for the DVDO 1x4 HDMI Splitter:
| Funkcja | Specyfikacja |
|---|---|
| Model | Rozdzielacz DVDO-14 |
| Zgodność z HDMI | HDMI 2.0b |
| Zgodność z HDCP | HDCP2.2 jest standardem, który umożliwia: |
| wideo Bandwidth | 18 Gb/s |
| Obsługiwane rozdzielczości | Up to 4K@60Hz (4:4:4 Chroma Subsampmolwa) |
| Głębia koloru | 8-bitowy, 10-bitowy, 12-bitowy |
| Obsługa HDR | Tak |
| Wsparcie 3D | Tak |
| Formaty audio | PCM, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, DTS:X |
| Porty wejściowe | 1 x HDMI typu A |
| Porty wyjściowe | 4 x HDMI typu A |
| Zasilacz | Prąd stały 5 V |
| Wymiary (dł. x szer. x wys.) | 7.64 x 6.22 x 1.89 cala (w przybliżeniu) |
| Waga | 1.2 funta (w przybliżeniu) |
| Kolor | Czarny |
9. Gwarancja i wsparcie
DVDO products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. The specific duration and terms of the warranty may vary by region and purchase date. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact DVDO customer service through the official DVDO website or your point of purchase. You may also find additional resources and FAQs on the DVDO support page.
Wsparcie online: Visit the official DVDO webwitryna zawierająca zasoby pomocy.
Informacje kontaktowe: Refer to your product packaging or the DVDO webna naszej stronie znajdziesz najnowsze dane kontaktowe.
