Instrukcja obsługi bezprzewodowego przenośnego irygatora do zębów SEAGO SG-833BLK

Wstęp

This manual provides comprehensive instructions for the safe and effective use of your SEAGO SG-833BLK Cordless Portable Water Flosser. This device is designed to assist with oral hygiene by effectively cleaning between teeth and below the gumline, complementing regular brushing. It features a 200ML water reservoir, multiple jet tips, and three operating modes for various oral care needs.

Przed pierwszym użyciem należy uważnie przeczytać instrukcję i zachować ją do wykorzystania w przyszłości.

Informacje dotyczące bezpieczeństwa

Dla Twojego bezpieczeństwa i zapewnienia prawidłowego działania, prosimy o przestrzeganie następujących środków ostrożności:

• Do not immerse the main unit in water. The device is IPX7 waterproof, but prolonged submersion should be avoided.
• Przechowywać w miejscu niedostępnym dla dzieci.
• Consult a dental professional before use if you have severe periodontal disease, oral surgery, or other medical conditions.
• Use only water or dentist-recommended solutions in the reservoir. Do not use iodine, saline, or essential oils without professional advice.
• Przed podłączeniem kabla USB w celu naładowania upewnij się, że port ładowania jest suchy.
• Do not operate the device if it has been dropped, damaged, or if any parts are missing or broken.

Zawartość opakowania

• SEAGO SG-833BLK Water Flosser Unit
• Standardowe końcówki dysz (2)
• Orthodontic Spray Head (1)
• Periodontal Pocket Sprinkler (1)
• Tongue Scraper (1)
• USB Charging Cable (adapter not included)
• Torba do przechowywania

Image: The SEAGO SG-833BLK water flosser unit displayed with its various interchangeable jet tips, including standard, orthodontic, periodontal, and tongue cleaner tips.

Organizować coś

1. Naładuj urządzenie: Before first use, fully charge the water flosser. Connect the USB charging cable to the device and a compatible USB power adapter (not included). The charging indicator lights will illuminate. A full charge takes approximately 5 hours and provides up to 65 days of use. Ensure the charging port is dry before connecting.
2. Zamontuj dyszę: Open the water injection hole cover. Insert the desired jet tip into the opening until it clicks securely into place. A "click" sound indicates proper installation.
3. Napełnij zbiornik na wodę: Keep the top cover open to facilitate easier opening of the water tank. Detach the water tank from the main unit by pulling it down. Fill the tank with lukewarm water. Reattach the water tank securely to the main unit. Alternatively, you can fill the tank directly through the water injection hole without detaching the tank.

Image: The SEAGO SG-833BLK water flosser with a standard jet tip securely installed, ready for use.

Instrukcja obsługi

1. Wybierz tryb: Press the mode button to cycle through the available modes:
   • Gentle (Soft) Mode: Continuous water spray, ideal for first-time users and those with sensitive teeth or gums.
   • High Pressure (Normal) Mode: Continuous water spray for efficient cleaning, suitable for most users.
   • Massage (Pulse) Mode: Water sprays three times per second to deep clean and massage gums.
   Each mode has a 2-minute timer for optimal cleaning duration.
2. Pozycja dyszy: Lean over a sink and place the nozzle tip into your mouth, aiming the water stream at the gumline at a 90-degree angle.
3. Rozpocznij nitkowanie: Press the power button to begin. Keep your mouth slightly open to allow water to flow into the sink. Move the nozzle along the gumline, pausing briefly between teeth.
4. Wyczyść wszystkie obszary: Ensure you clean both the inside and outside surfaces of your teeth, as well as the chewing surfaces. The 360-degree rotatable nozzle allows for easy access to all areas.
5. Wyłączyć coś: Press the power button again to turn off the device when finished or when the water tank is empty.

Image: An illustration detailing the three distinct operating modes of the water flosser: Daily for routine cleaning, High for deep cleaning, and Pulse for gum massage.

Image: A user demonstrating the proper technique for holding and positioning the SEAGO water flosser during use, aiming the nozzle at the teeth and gumline.

Konserwacja

1. Opróżnianie i płukanie zbiornika: After each use, empty any remaining water from the tank. Open the top cover, press the nozzle release button, and remove the nozzle. Rinse the water tank thoroughly with clean water. Keep the top cover open for smoother compression and return of the water tank.
2. Czysta dysza: Rinse the jet tip under running water. For deeper cleaning, you may soak the tip in a denture cleaning solution or white vinegar periodically.
3. Jednostka czyszcząca: Wipe the exterior of the water flosser unit with a soft, damp płótno. Nie używaj ściernych środków czyszczących ani żrących chemikaliów.
4. Składowanie: Ensure the device is dry before storing. Store the water flosser and its accessories in the provided storage bag in a cool, dry place away from direct sunlight.

Rozwiązywanie problemów

Specyfikacje

• Numer modelu: SG-833BLK
• Pojemność zbiornika na wodę: 200 mililitrów
• Źródło zasilania: Zasilanie bateryjne (w zestawie 1 bateria litowo-jonowa)
• Czas ładowania: Około 5 godzin
• Czas pracy baterii: Do 65 dni na jednym ładowaniu
• Water Pulse Rate: Up to 2000 pulses per minute
• Stopień wodoodporności: IPX7
• Cechy szczególne: Lightweight, Portable, Rechargeable, Rotatable Tip, 2-minute Timer
• Zalety produktu: Removes plaque and improves gum health
• Wymiary opakowania: 10.04 x 3.7 x 3.03 cala
• Waga przedmiotu: 1.02 funtów

Gwarancja i wsparcie

This product is covered by a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact SEAGO customer support. If you encounter any issues or have questions regarding your SEAGO SG-833BLK Water Flosser, please visit the official SEAGO store on Amazon or contact their customer service for assistance.

Aby uzyskać dalszą pomoc, odwiedź stronę SEAGO Store on Amazon.