BWT D600 APP Pool Robot

Wstęp

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your BWT D600 APP Pool Robot. Please read this manual thoroughly before using the device and keep it for future reference.

Instrukcje bezpieczeństwa

Always observe the following safety precautions to prevent injury or damage to the robot and your pool.

• Przed przystąpieniem do czynności konserwacyjnych lub czyszczenia należy upewnić się, że zasilanie jest odłączone.
• Do not operate the robot if the power cable is damaged.
• Podczas pracy robota należy trzymać dzieci i zwierzęta domowe z dala od basenu.
• Only use the robot in water temperatures between 10°C and 35°C (50°F and 95°F).
• Do not use the robot if there are swimmers in the pool.
• Ensure the robot is fully submerged before starting a cleaning cycle.
• Gdy robot nie jest używany, przechowuj go w chłodnym i suchym miejscu.

Produkt ponadview

The BWT D600 APP Pool Robot is designed for optimal cleaning of pool floors, walls, and waterlines. It features advanced navigation and filtration technologies to ensure a pristine pool environment.

Rysunek 1: The BWT D600 APP Pool Robot, showcasing its sleek design and the accompanying smartphone application for control.

Główne cechy:

• Optimal Suction Power: Adjustable nozzles adapt to different types of debris for superior cleaning.
• Inteligentna nawigacja: Integrated gyroscope calculates the most efficient cleaning path for quick and thorough coverage.
• 4D Filter Technology: Special filter insert with additional vibrations captures all impurities, from fine sand to leaves.
• Breezer and Ultimate Power Technology: Ensures high efficiency, resistance, and robust performance with two motors and a powerful pump.
• Kontrola aplikacji: Bluetooth connectivity allows remote control via the free BWT RC app (available on Apple Store and Play Store).
• Oświetlenie LED: Illuminates the pool with a pink glow during operation, synchronized with suction.
• Convenient Transport: Includes a practical transport caddy for easy handling.

Organizować coś

1. Rozpakowanie i montaż:

Carefully remove all components from the packaging. The BWT D600 APP Pool Robot comes with a transport caddy that requires minimal assembly. Follow the instructions provided in the quick start guide for caddy assembly.

2. Initial Placement in Pool:

Place the robot gently into the pool. Allow it to sink completely and release any trapped air. This process may take a few moments as the robot fills with water. Ensure the power supply unit is placed at a safe distance from the pool edge and connected to a grounded outlet.

3. App Download and Connection:

1. Download the "BWT RC" application from the Apple App Store or Google Play Store on your smartphone.
2. Upewnij się, że Bluetooth jest włączony w Twoim smartfonie.
3. Open the BWT RC app and follow the on-screen instructions to pair with your BWT D600 APP Pool Robot. The robot's Bluetooth module will be discoverable when powered on.

Rysunek 2: Controlling the BWT D600 APP Pool Robot via the BWT RC smartphone application.

Instrukcja obsługi

1. Starting a Cleaning Cycle:

Once the robot is submerged and connected to the app, you can initiate a cleaning cycle.

• From the BWT RC app, select the desired cleaning program. The robot will automatically begin its Smart Navigation process.
• The Smart Navigation system uses an integrated gyroscope to map your pool and determine the most efficient cleaning path for comprehensive coverage of the floor, walls, and waterline.

Rysunek 3: The BWT D600 APP Pool Robot actively cleaning the pool's surfaces.

2. Manual Control (via App):

The app also allows for manual control, enabling you to direct the robot to specific areas that require extra attention.

• Access the manual control interface within the BWT RC app.
• Use the directional controls to navigate the robot. Note that there might be a slight delay in response due to Bluetooth communication.

3. Adjustable Suction Nozzles:

The robot features adjustable suction nozzles. For optimal performance, ensure the nozzles are adjusted to be as close as possible to the surface being cleaned. This enhances suction power and adapts to different types of debris.

4. Oświetlenie LED:

The robot is equipped with LED lighting that emits a pink glow during operation, adding an aesthetic element to your pool cleaning routine.

Konserwacja

1. Czyszczenie filtra:

Regular cleaning of the 4D filter is crucial for maintaining the robot's cleaning efficiency.

1. Po każdym cyklu czyszczenia wyjmij robota z basenu.
2. Open the filter compartment (refer to the quick start guide for specific instructions on accessing the filter).
3. Remove the filter insert and rinse it thoroughly with a garden hose until all debris is removed.
4. Ensure the filter is completely clean before reinserting it into the robot.

Rysunek 4: The underside of the BWT D600 APP Pool Robot, highlighting the brushes and adjustable suction nozzles. Regular inspection and cleaning of these components are recommended.

2. General Cleaning of the Robot:

Okresowo przecieraj zewnętrzną część robota miękką szmatką.amp płótno. Nie używaj ostrych środków chemicznych ani ściernych środków czyszczących.

3. Przechowywanie:

When not in use for extended periods, clean the robot thoroughly, ensure it is dry, and store it in its transport caddy in a cool, dry, and shaded area, away from direct sunlight and extreme temperatures.

Rozwiązywanie problemów

Specyfikacje

Gwarancja i wsparcie

For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official BWT webstrona.

Should you encounter any issues not covered in this manual or require further assistance, please contact BWT customer support through their official channels.