Vicks VNT275US

Instrukcja obsługi termometru bezkontaktowego na podczerwień Vicks VNT275US

Model: VNT275US

Wstęp

This manual provides essential instructions for the safe and effective operation of your Vicks Non-Contact Infrared Thermometer, Model VNT275US. Please read this manual thoroughly before using the device and keep it for future reference.

Ważne informacje dotyczące bezpieczeństwa

Cechy produktu

Zawartość opakowania

Organizować coś

1. Instalacja baterii

  1. Znajdź pokrywę komory baterii na uchwycie termometru.
  2. Otwórz pokrywę.
  3. Włóż dwie baterie AAA, zwracając uwagę na prawidłową biegunowość (+ i -).
  4. Dokładnie zamknij pokrywę komory baterii.
Vicks thermometer with battery compartment visible

Obraz: Tył view of the Vicks thermometer showing the battery compartment.

This image illustrates the location of the battery compartment at the base of the thermometer's handle, where two AAA batteries are inserted.

Instrukcja obsługi

1. Taking a Body Temperature Reading

  1. Ensure the thermometer is in "Body" mode. If not, press the "MODE" button to cycle through modes until "Body" is displayed.
  2. Position the thermometer 0.4 to 2 inches (1-5 cm) away from the center of the forehead, between and slightly above the eyebrows.
  3. Press the trigger button once. The temperature reading will appear on the display within 2 seconds.
  4. Observe the display color:
    • Zielony: Normalna temperatura.
    • Żółty: Mildly elevated temperature.
    • Czerwony: High temperature (fever).
Person taking forehead temperature with Vicks thermometer

Image: A Vicks Non-Contact Infrared Thermometer being used to measure a child's forehead temperature.

This image demonstrates the correct positioning of the thermometer for taking a non-contact forehead temperature reading.

Vicks thermometer display showing green, yellow, and red for different temperature ranges

Image: The Vicks thermometer's Fever Insight feature displaying green, yellow, and red screens for different temperature levels.

This image illustrates the color-coded display feature, which changes from green (normal) to yellow (mild fever) to red (high fever) based on the temperature reading.

2. Taking Food or Bath Temperature (Surface Mode)

  1. Press the "MODE" button to switch to "Surface" mode.
  2. Point the thermometer at the surface of the food or bath water you wish to measure.
  3. Press the trigger button. The surface temperature will be displayed.

3. Switching Between Fahrenheit (°F) and Celsius (°C)

  1. With the thermometer turned OFF, press and hold the "SET" button for 3 seconds until "Unit" appears on the screen.
  2. Press the "MEMO" button to toggle between °F and °C.
  3. Press the trigger button to save your selection and exit the setting.

Video: Instructions on how to change temperature units and mute the Vicks thermometer.

This official Vicks video demonstrates the process of switching between Fahrenheit and Celsius temperature units, and how to activate or deactivate the mute function on the thermometer.

4. Korzystanie z funkcji wyciszenia

  1. With the thermometer turned ON, press the "SET" button quickly to toggle the sound ON or OFF.
  2. An icon indicating sound status will appear on the display.

5. Wspomnienie

  1. With the thermometer turned ON, press the "MEMO" button to view the last 50 stored readings.
  2. Each press of the "MEMO" button will cycle through previous readings.

Konserwacja i czyszczenie

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Brak obrazu po włączeniu zasilania.Baterie są rozładowane lub nieprawidłowo włożone.Sprawdź biegunowość baterii lub wymień je na nowe baterie AAA.
Niedokładne odczyty.Incorrect measurement distance or angle; dirty sensor; environmental factors.Ensure correct distance (0.4-2 inches) and aim. Clean the sensor. Avoid drafts or extreme temperatures during measurement.
Wyświetlane jest "Lo" lub "Hi".Temperatura jest poza zakresem pomiaru.Ensure the thermometer is in the correct mode (Body/Surface) for the intended measurement.
Dźwięk nie działa.Mute function is activated.Press the "SET" button quickly to toggle the sound ON.

Specyfikacje

Gwarancja i wsparcie

For warranty information or customer support, please refer to the warranty card included with your product or visit the official Vicks Devices webstrona. Można także odwiedzić Sklep Vicks na Amazon Aby uzyskać więcej szczegółów na temat produktu i zasobów pomocy technicznej.

Producent: Vicks (Kaz Inc.)

Powiązane dokumenty - VNT275PL

Przedview Instrukcja obsługi bezkontaktowego termometru na podczerwień Vicks VNT275US
Niniejsza instrukcja zawiera podstawowe informacje dotyczące prawidłowej obsługi bezdotykowego termometru do ciała na podczerwień Vicks VNT275US. Zapoznaj się z jego funkcjami, środkami ostrożności, a także z instrukcjami rozwiązywania problemów.
Przedview Instrukcja obsługi bezkontaktowego termometru na podczerwień Vicks VNT275US
Niniejsza instrukcja zawiera szczegółowe instrukcje dotyczące prawidłowej obsługi, środków ostrożności i konserwacji bezdotykowego termometru na podczerwień Vicks VNT275US. Dowiedz się, jak dokładnie mierzyć temperaturę ciała, poznaj jego funkcje i zapewnij bezpieczne użytkowanie.
Przedview Instrukcja obsługi termometru czołowego Vicks VNT200 No Touch 3 w 1
Instrukcja obsługi termometru czołowego Vicks VNT200 No Touch 3 w 1. Dowiedz się, jak używać, dbać o termometr Vicks i rozwiązywać problemy.
Przedview Instrukcja obsługi bezkontaktowego termometru na podczerwień Vicks VNT275CA
Niniejsza instrukcja obsługi zawiera szczegółowe informacje na temat bezdotykowego termometru na podczerwień Vicks VNT275CA, obejmujące jego funkcje, bezpieczną obsługę, specyfikacje techniczne i rozwiązywanie problemów, co pozwala na dokładne odczytywanie temperatury w warunkach domowych i zawodowych.
Przedview Instrukcja obsługi termometru bezdotykowego na podczerwień Vicks HTD8813AU
Instrukcja obsługi bezkontaktowego termometru do ciała na podczerwień Vicks, model HTD8813AU. Zawiera instrukcje dotyczące przeznaczenia, informacje dotyczące bezpieczeństwa oraz informacje o urządzeniu.view, specyfikacje techniczne, obsługa, rozwiązywanie problemów i gwarancja.
Przedview Termometr Vicks No Touch 3 w 1 (VNT200) – instrukcja obsługi
Niniejszy dokument zawiera kompleksową instrukcję obsługi termometru Vicks No Touch 3 w 1 (VNT200), obejmującą jego funkcje, bezpieczne użytkowanie, pomiar temperatury, rozwiązywanie problemów, konserwację i specyfikację. Termometr jest przeznaczony do użytku domowego i służy do dokładnego pomiaru temperatury ciała, jedzenia i kąpieli.